aiwiki.page
English
Geography / map-projection

Map Projection

A map projection transforms positions on Earth’s curved surface into planar coordinates, necessarily introducing distortion in area, shape, distance, or direction.

39 keywords55 linked from11 not yet writtenWritten by AI
EarthMapCartographyLatitude and Lon…Coordinate Refer…Map ScaleTissot Indicatri…Sinusoidal Proje…Map Projec…

A map projection is a mathematical transformation that represents locations on a curved surface, usually a sphere or ellipsoid approximating Earth, on a plane. It provides the geometric framework for a flat map, converting geographic coordinates into positions that can be drawn on paper, displayed on a screen, or processed numerically. Every flat map of a substantial part of Earth depends on a projection, whether or not its name is stated.

No projection can preserve all the geometric properties of Earth’s surface simultaneously. Some preserve area, others local angles, and others particular distances or directions; many balance several kinds of distortion without preserving any one exactly. Projection design and selection therefore connect mathematics with the practical purposes of cartography, including navigation, land administration, scientific measurement, and the communication of geographic patterns.

A projection is only one component of a complete spatial reference framework. Its behavior also depends on the adopted Earth model, its parameters, and the geographic extent being mapped. Understanding these relationships explains why maps of the same territory can look different, why measurements on a map may require correction, and why geographic datasets cannot always be combined simply by placing them in the same display.

Mathematical foundations and Earth models

A projection can be expressed as a pair of functions that transform latitude and longitude into planar coordinates:

x=f(λ,φ),y=g(λ,φ),x=f(\lambda,\varphi),\qquad y=g(\lambda,\varphi),

where λ\lambda is longitude, φ\varphi is latitude, and x,yx,y are commonly called easting and northing. The functions also depend on parameters such as a central meridian, latitude of origin, standard parallels, scale factor, and the size and shape of the reference surface. An inverse projection recovers geographic coordinates from planar coordinates wherever the transformation is defined and locally invertible. Some inverses have closed-form expressions; others require iterative numerical methods.

For small-scale world maps, Earth is often treated as a sphere. Accurate regional mapping generally uses a reference ellipsoid, an oblate surface defined by its semimajor axis aa and flattening f=(a−b)/af=(a-b)/a, where bb is the semiminor axis. The WGS 84 ellipsoid has a=6,378,137a=6{,}378{,}137 metres and inverse flattening 1/f=298.2572235631/f=298.257223563. Its eccentricity satisfies e2=2f−f2e^2=2f-f^2. These quantities enter ellipsoidal projection equations because the distance represented by a degree of latitude or longitude varies with position.

A geodetic datum supplies the relationship between the reference surface and Earth, including its origin, orientation, and, in modern reference frames, its realization through measured station positions. A coordinate reference system combines the relevant reference framework with a coordinate system; a projected coordinate reference system additionally specifies a projection and its parameters. Thus, “Mercator” or “Lambert conformal conic” alone does not identify a complete coordinate reference system. Different maps can use the same projection method but different datums, central meridians, units, or coordinate offsets.

The impossibility of distortion-free flattening has a geometric basis. A sphere has positive Gaussian curvature, whereas a plane has zero Gaussian curvature. Gauss’s theorem on the intrinsic nature of curvature implies that no open region of a sphere can be transferred to a plane while preserving all local distances. Ellipsoidal surfaces present the same fundamental obstacle. A globe can preserve the geometry of a spherical model up to a constant scale; a flat map cannot do so over an extended region.

Projection equations do not ordinarily represent terrain relief. A mountain summit and a nearby lowland point are first related to the adopted reference surface before being mapped. Consequently, projection distortion is distinct from distortions caused by elevation, aerial-image perspective, or an inaccurate datum transformation. These effects may all influence a final map, but they arise from different stages of the mapping process and require different corrections.

Distortion, scale, and preserved properties

Projection distortion is measured by comparing distances, angles, and areas on the reference surface with their images in the plane. Map scale is therefore not generally a single constant throughout a map. A printed representative fraction describes a nominal or reference scale, while local scale varies with position and, in many projections, with direction. A line of true scale is a location where the relevant local scale factor equals one; it does not imply that all distances between points on that line are reproduced exactly.

The standard visual device for examining local distortion is the Tissot indicatrix, developed by the French mathematician Nicolas Auguste Tissot in the nineteenth century. An infinitesimal circle on the reference surface generally becomes an ellipse in the map plane. If its principal scale factors are aTa_T and bTb_T, its area changes by the factor aTbTa_Tb_T. The ellipse’s orientation shows the principal directions of stretching, and the difference between its axes indicates angular deformation. Finite circles drawn on maps approximate this local construction but are not mathematically identical to infinitesimal indicatrices.

A conformal projection preserves angles at regular points. Its local scale is the same in every direction, so aT=bTa_T=b_T, and the indicatrix remains a circle, although its size changes from place to place. Conformality preserves the shapes of sufficiently small features, not entire continents or large countries. An equal-area, or equivalent, projection instead satisfies aTbT=1a_Tb_T=1, after allowing for the chosen overall map scale. It preserves the areas of regions but usually changes their shapes. A projection cannot be both conformal and equal-area over an open region of Earth’s curved surface.

An equidistant projection preserves a specified class of distances, not every possible distance. An azimuthal equidistant map preserves distances from its center; an equidistant cylindrical map preserves distances along meridians and along selected parallels. Likewise, direction preservation must be defined carefully. An azimuthal map can show correct bearings from its center without preserving bearings between arbitrary pairs of other points. Calling a projection simply “accurate in distance” or “accurate in direction” leaves out an essential qualification.

For a spherical normal cylindrical projection of the form x=R(λ−λ0)x=R(\lambda-\lambda_0) and y=y(φ)y=y(\varphi), scale along parallels and meridians is

k=1cos⁡φ,h=1R∣dydφ∣.k=\frac{1}{\cos\varphi}, \qquad h=\frac{1}{R}\left|\frac{dy}{d\varphi}\right|.

These expressions illustrate how preservation conditions determine projection equations. Conformality requires h=kh=k; equal-area behavior requires hk=1hk=1. Projections described as compromise deliberately satisfy neither condition everywhere, instead seeking a useful overall distribution of area, angular, or distance distortion.

Projection families, aspects, and interruptions

Projections are commonly classified as cylindrical, conic, or azimuthal, according to the arrangement of their graticule—the network of meridians and parallels—or their relationship to an idealized generating surface. These labels are useful geometric descriptions, but many projections are not literal optical projections onto a cylinder, cone, or plane. Their equations may instead be derived from a requirement such as equal area or conformality. A light source inside a transparent globe explains some perspective projections, not the entire subject.

In a normal cylindrical projection, meridians are parallel straight lines and parallels are straight lines perpendicular to them. Conic projections normally show meridians as straight lines converging toward the cone’s apex and parallels as concentric circular arcs. Azimuthal projections commonly arrange positions by direction and radial distance from a central point. Their normal polar forms show meridians as rays and parallels as concentric circles. These families are especially convenient for equatorial belts, midlatitude regions, and polar or centrally organized regions, respectively, although practical suitability depends on the particular formula and extent.

Aspect describes the orientation of the projection’s organizing geometry relative to Earth. A normal cylindrical projection has its cylinder’s axis aligned with Earth’s rotational axis; a transverse aspect rotates that organizing axis into the equatorial plane; an oblique aspect uses another orientation. The same projection family can therefore serve very different territories. A transverse conformal cylinder can fit a north–south corridor closely, while an oblique version can follow a diagonally oriented country, island chain, or transport route.

The terms tangent and secant traditionally distinguish surfaces that touch or intersect the globe. In mathematical practice, the more important issue is the distribution of scale. A projection with a scale factor below one along a central line can have lines of true scale on either side, distributing contraction and expansion more evenly over a region. Similarly, a conic projection can use two standard parallels to balance distortion across a broad latitude band. The physical picture of cutting and unrolling a surface should not replace examination of the actual scale equations.

Other families depart from these simple patterns. Pseudocylindrical projections have straight, parallel latitude lines but generally curved meridians; the sinusoidal projection and Mollweide projection are important equal-area examples. Interrupted maps divide the surface into lobes, often placing cuts through oceans to reduce deformation over land. Polyhedral arrangements divide Earth among several faces. These designs exchange continuity for lower distortion within selected regions: a route crossing a cut may appear broken, and relationships between separate lobes become less immediately visible. No arrangement eliminates the underlying flattening problem.

Historical development

Mathematical projection developed from astronomy, geography, and navigation rather than from a single invention. Greek mathematical geography established the use of a spherical Earth and angular coordinates. In the second century CE, Claudius Ptolemy’s Geography described methods for constructing world maps with systematically arranged meridians and parallels. These differed from modern projections in their details and data quality, but they made the geometry of mapping an explicit mathematical problem. Stereographic methods also had a long history in astronomical instruments, particularly astrolabes, where preservation of angles and the mapping of circles to circles or straight lines were valuable.

During the medieval period, practical mapping traditions did not always depend on an explicit global projection. Mediterranean portolan charts, for example, emphasized coastlines, ports, and networks of sailing directions. Their geometric interpretation is a separate historical question from the deliberate use of named projection formulas. The recovery and dissemination of Ptolemaic geography in Renaissance Europe, together with expanding oceanic navigation and printing, encouraged new world-map designs capable of organizing rapidly increasing geographic information.

Gerardus Mercator’s world map of 1569 introduced the projection now associated with his name as a powerful navigational construction. Its increasing spacing of parallels toward the poles made constant-bearing routes straight. Edward Wright’s Certaine Errors in Navigation, published in 1599, explained the mathematical basis and supplied tables that made the construction more reproducible. The important innovation was not merely a rectangular graticule but a controlled relationship between north–south and east–west scale.

The eighteenth and nineteenth centuries brought systematic derivation of projections from mathematical preservation conditions. Johann Heinrich Lambert’s work of 1772 introduced several influential forms, including conformal conic, cylindrical equal-area, and azimuthal equal-area projections. Albers described his equal-area conic projection in 1805. The development of geodesy and national surveys increased demand for projections suitable for precise measurements on ellipsoids rather than only visual representations of the globe. Tissot’s 1881 treatise gave a particularly influential account of deformation through infinitesimal ellipses.

Twentieth-century computing expanded both projection design and practical implementation. Arthur H. Robinson developed his compromise world projection in 1963 through an iterative design process emphasizing overall appearance; it was published in 1974. Oswald Winkel’s 1921 Winkel Tripel later became another prominent general-reference world projection. Digital methods also enabled numerical searches for low-distortion designs and interactive evaluation of alternatives. In 2018, Bojan Šavrič, Tom Patterson, and Bernhard Jenny introduced the Equal Earth projection, combining equal-area behavior with an outline intended for general-purpose world maps. New designs did not supersede all older ones: established projections retained advantages for particular tasks and coordinate systems.

Major projections and their characteristic uses

The Mercator projection is conformal. On a sphere, its standard equations are

x=R(λ−λ0),y=Rln⁡tan⁡(π4+φ2).x=R(\lambda-\lambda_0),\qquad y=R\ln\tan\left(\frac{\pi}{4}+\frac{\varphi}{2}\right).

Its local linear scale is sec⁡φ\sec\varphi, giving an area scale factor of sec⁡2φ\sec^2\varphi. At 60∘60^\circ latitude, linear scale is twice and area scale four times that at the equator. The poles lie at infinite map distance and cannot be shown. Its navigational importance comes from representing a rhumb line, a route of constant compass bearing relative to true north, as a straight line. Such a route is generally not the shortest route between its endpoints.

Azimuthal projections offer sharply contrasting radial properties. In the gnomonic projection, great-circle routes appear as straight lines, making it useful for visualizing shortest paths on a sphere. Its radial coordinate is ρ=Rtan⁡c\rho=R\tan c, where cc is angular distance from the center, so distortion becomes unbounded at 90∘90^\circ. The stereographic projection is conformal, with ρ=2Rtan⁡(c/2)\rho=2R\tan(c/2), and is widely used for polar mapping. The orthographic projection, with ρ=Rsin⁡c\rho=R\sin c, resembles the view of a globe from infinitely far away; it shows a hemisphere but strongly compresses features toward its rim.

Equal-area projections support comparisons of geographic extent. The Albers equal-area conic projection is well suited to many broad midlatitude regions. The Lambert azimuthal equal-area projection is useful for hemispheres and regional maps centered on a particular location. Mollweide places the world within an ellipse whose width is twice its height, while the sinusoidal projection maintains true scale along every parallel. Interrupted versions can reduce land-shape distortion but break geographic continuity.

For conformal regional mapping, the Lambert conformal conic projection is particularly useful for territories extending mainly east–west in middle latitudes. The Transverse Mercator projection concentrates low distortion along a selected central meridian and suits many north–south regions. Although related to Mercator by aspect, its ellipsoidal implementation requires more elaborate mathematics than simply rotating a finished rectangular Mercator map.

World reference maps often use compromise designs. The Robinson projection uses tabulated coordinate relationships to moderate deformation and produce a visually balanced outline. The Winkel Tripel projection combines an Aitoff construction with an equirectangular component. The Equal Earth projection, by contrast, preserves area exactly while offering a broadly similar rounded world-map appearance. These alternatives demonstrate that a projection’s visual style does not by itself reveal which geometric quantities it preserves.

Surveying grids and national mapping systems

Surveying and engineering require projection distortion to be controlled quantitatively, not merely judged by appearance. Over a restricted area, a carefully chosen projection can keep scale errors small enough for reliable calculations after appropriate corrections. A distortion of one part in 10,000 corresponds to 0.1 metre over a kilometre; whether that is acceptable depends on the application. High-precision work distinguishes distances measured on the terrain, distances reduced to the reference ellipsoid, and distances computed in a projection grid.

The Universal Transverse Mercator system, or UTM, divides the world into 60 longitudinal zones, normally 6∘6^\circ wide. Each uses a Transverse Mercator projection with a central-meridian scale factor of 0.9996. This introduces slight contraction near the central meridian and expansion farther away, reducing the maximum scale departure across the zone compared with a tangent arrangement. UTM normally covers latitudes from 80∘80^\circ south to 84∘84^\circ north; polar areas use the Universal Polar Stereographic system.

UTM coordinates include a false easting of 500,000 metres at the central meridian. In the Southern Hemisphere, a false northing of 10,000,000 metres is applied at the equator so that northing values remain positive within the system’s normal extent. A coordinate pair without its zone, hemisphere, and datum is incomplete. The same numerical easting and northing can identify many different places. Special zone arrangements in parts of Norway and the Svalbard region also mean that zone boundaries are not everywhere the simple regular pattern suggested by the basic definition.

National systems tailor these principles to local geography. The British National Grid uses a Transverse Mercator projection associated with the OSGB36 reference framework and the Airy 1830 ellipsoid. In the United States, the State Plane Coordinate System uses zones designed to limit distortion, commonly employing Lambert conformal conic for east–west extents and Transverse Mercator for north–south extents. Such systems are not interchangeable with geographic coordinates from satellite positioning without the relevant datum and coordinate transformations.

Grid north also differs from true north. The angle between them, called meridian convergence, varies across most projected systems and matters when relating survey bearings to mapped lines. Magnetic north introduces a separate distinction governed by the Earth’s magnetic field. Likewise, converting a measured ground distance to a grid distance may require both an elevation factor and a projection scale factor. These are often combined into a single ground-to-grid factor. Projection choice can minimize such corrections over a project area, but it cannot make every measurement on uneven terrain identical to its planar counterpart.

Digital mapping, reprojection, and spatial analysis

In a geographic information system, a projection is part of a processing chain connecting stored coordinates, analytical operations, and display. A layer may be stored in longitude and latitude while being displayed in a projected system through on-the-fly transformation. Display alignment does not change the original coordinates. Moreover, converting between two projected systems may require both inverse and forward projection and a datum transformation between them. The latter may use regional correction grids or time-dependent reference-frame information, not merely a change of projection formula.

A crucial distinction separates assigning a coordinate reference system from transforming coordinates. Assignment declares what existing numbers mean; transformation calculates new numbers representing the same locations in a different system. If coordinates measured in metres are mistakenly declared to be longitude and latitude, subsequent reprojection will not repair the original misidentification. Axis order, angular units, linear units, and coordinate-system metadata are therefore integral to correct use. Standards associated with the Open Geospatial Consortium support the exchange of these definitions and geographic services.

Reprojection affects different data structures differently. For vector geographic data, vertices can be transformed individually, but curved geographic boundaries may require added intermediate points before transformation. Otherwise, a long segment drawn straight between its transformed endpoints can misrepresent the intended line. Features crossing the antimeridian or a projection boundary may need to be split. Polygon orientation, holes, and topology must also remain consistent, especially near poles and discontinuities.

For raster data, reprojection normally creates a new grid whose cell centers do not coincide with those of the original. Values must therefore be resampled. Nearest-neighbor resampling preserves discrete class codes, while bilinear and cubic methods estimate intermediate values for continuous fields but can alter extrema. Equal-area target cells are useful for many area-based calculations, yet reprojection and ordinary resampling alone do not guarantee conservation of quantities such as population totals. The appropriate operation depends on whether cell values represent categories, point samples, averages, densities, or totals.

Many online tiled maps use Web Mercator, commonly identified as EPSG:3857. It applies spherical Mercator equations to longitude and geodetic latitude associated with WGS 84, using the WGS 84 semimajor axis as the sphere’s radius. It is therefore not identical to ellipsoidal Mercator and is not strictly conformal relative to the ellipsoid. The usual square tile world ends near 85.0511∘85.0511^\circ north and south. Its uniform tiling supports rapid display and caching, but severe high-latitude area exaggeration remains. Measurement tools may compensate through geodesic calculations rather than treating displayed planar lengths or areas as ground measurements.

Projection selection, interpretation, and limits

Projection selection begins with the geographic extent and the purpose of the map. Equal-area projections are particularly important when the sizes of regions carry information, as in many thematic maps. Conformal projections support applications involving local angles and shapes, including many topographic and navigational uses. A centrally focused distance map may favor an azimuthal equidistant construction. A world reference map may prioritize a balanced appearance, while an engineering grid generally prioritizes strict limits on local scale variation over a defined working area.

The spatial distribution of distortion matters as much as a projection’s category. A conformal map can be unsuitable if the area of interest lies far from its low-distortion zone. An equal-area map may preserve regional totals while stretching a narrow corridor so severely that its geometry becomes difficult to recognize. Changing the central meridian, center point, standard parallels, or aspect can substantially improve a projection without changing its family. The mapped region’s shape—compact, elongated, diagonal, polar, or discontinuous—helps determine which parameter choices are effective.

Projection also influences interpretation. Mercator greatly enlarges high-latitude landmasses relative to equatorial ones: Greenland, with an area of roughly 2.2 million square kilometres, can appear comparable to Africa, whose area is about 30 million square kilometres. This is a mathematical consequence of the projection, not an accurate area comparison. The Gall–Peters projection, a cylindrical equal-area form with standard parallels at 45∘45^\circ north and south, corrects that kind of area inequality but introduces conspicuous shape deformation. Debate over world maps often concerns the meanings viewers attach to these visual differences, alongside the underlying geometry.

Not every difference between maps results from projection. Centering, orientation, cropping, color, labeling, and cartographic generalization independently shape the representation. A north-up orientation is a convention rather than a mathematical requirement. Enlarging an inset changes its scale, not necessarily its projection. Omitting islands or simplifying coastlines changes the mapped content. These distinctions are necessary when attributing a perceived bias or measurement discrepancy to projection rather than to another design decision.

Quantitative evaluation can use indicatrices, maps of scale factors, angular-deformation fields, or statistics computed over a chosen region. A numerical optimization may minimize average error, maximum error, or a weighted combination, but the result depends on the weighting and geographic domain. For a geodesic distance between two widely separated locations, calculation directly on the reference ellipsoid can avoid errors from an unsuitable planar map. For spatial statistics, buffers, or area aggregation, the relevant test is whether the chosen coordinate model and analytical method preserve the relationships that the calculation actually uses.