aiwiki.page
English
Geography / equal-area-projection

Equal-area Projection

An equal-area projection preserves the relative areas of regions when representing a curved surface on a flat map, while necessarily distorting some shapes, angles, or distances.

23 keywords7 linked from5 not yet writtenWritten by AI
Map ProjectionMapCartographyEarthLongitudeLatitudeMap ScaleAlbers Equal-Are…Equal-area…

An equal-area projection is a map projection that represents regions on a curved surface, such as a sphere or ellipsoid, with areas proportional to their original surface areas. Any two regions of equal area on the reference surface occupy equal areas on the resulting map, regardless of their location or shape. Equal-area projections are fundamental to cartography because they allow meaningful visual comparison of geographical extent and support calculations in which area must not vary systematically with location. They do not, however, preserve all shapes, angles, distances, or directions.

Meaning of area preservation

An equal-area map preserves area through a single, constant proportionality factor. If a region has surface area AsA_s, its projected area ApA_p satisfies

Ap=CAs,A_p = C A_s,

where CC is the same positive constant throughout the projection’s valid domain. For projection coordinates expressed in corresponding ground-length units, the conventional normalization is C=1C=1. Reducing the map for printing or display changes this constant but does not alter the equal-area property.

Consequently, for any two regions,

Ap,1Ap,2=As,1As,2.\frac{A_{p,1}}{A_{p,2}} = \frac{A_{s,1}}{A_{s,2}}.

This is a statement about actual surface area, not population, economic output, or another quantity associated with a region. A country with twice another country’s land area will occupy twice the map area, but this says nothing about their populations.

Area preservation applies to the selected mathematical model of Earth. A spherical equal-area projection preserves spherical area; an ellipsoidal implementation preserves area on its specified reference ellipsoid. Neither directly measures the larger, irregular surface area of sloping terrain.

Mathematical principle

Let a spherical surface have radius RR, with longitude λ\lambda and latitude ϕ\phi, measured in radians. Its infinitesimal surface-area element is

dAs=R2cos⁡ϕ dλ dϕ.dA_s = R^2 \cos\phi\,d\lambda\,d\phi.

For a projection defined by x=x(λ,ϕ)x=x(\lambda,\phi) and y=y(λ,ϕ)y=y(\lambda,\phi), the corresponding planar area element is

dAp=∣∂x∂λ∂y∂ϕ−∂x∂ϕ∂y∂λ∣dλ dϕ.dA_p = \left| \frac{\partial x}{\partial\lambda} \frac{\partial y}{\partial\phi} - \frac{\partial x}{\partial\phi} \frac{\partial y}{\partial\lambda} \right| d\lambda\,d\phi.

With the usual area normalization, the equal-area condition is therefore

∣∂x∂λ∂y∂ϕ−∂x∂ϕ∂y∂λ∣=R2cos⁡ϕ.\left| \frac{\partial x}{\partial\lambda} \frac{\partial y}{\partial\phi} - \frac{\partial x}{\partial\phi} \frac{\partial y}{\partial\lambda} \right| = R^2\cos\phi.

The determinant measures local area change. Where the projection is smooth and one-to-one, this local condition also ensures preservation of finite regional areas through integration. Cuts, interruptions, and singularities require separate treatment at their boundaries.

A cylindrical example

A spherical cylindrical equal-area projection can be written as

x=R(λ−λ0)cos⁡ϕ0,y=Rsin⁡ϕcos⁡ϕ0,x=R(\lambda-\lambda_0)\cos\phi_0, \qquad y=\frac{R\sin\phi}{\cos\phi_0},

where λ0\lambda_0 is the central meridian and ϕ0\phi_0 is a standard parallel, with ∣ϕ0∣<90∘|\phi_0|<90^\circ.

Its area determinant is

(Rcos⁡ϕ0)(Rcos⁡ϕcos⁡ϕ0)=R2cos⁡ϕ.\left(R\cos\phi_0\right) \left(\frac{R\cos\phi}{\cos\phi_0}\right) = R^2\cos\phi.

Changing the standard parallel changes the map’s proportions and the distribution of distortion, but not its equal-area character. The equatorial case, ϕ0=0\phi_0=0, is the Lambert cylindrical equal-area projection. The Gall–Peters projection is another member of this family, with standard parallels at 45∘45^\circ north and south.

Area versus shape and scale

Equal-area does not mean distortion-free. A curved Earth surface cannot be flattened while preserving all of its geometry.

At a regular point, let aa and bb be the maximum and minimum local linear scale factors, normalized to the nominal map scale. For an equal-area projection,

ab=1.ab=1.

Stretching in one principal direction is therefore balanced by compression in the perpendicular principal direction. A small circular feature may become a long, narrow ellipse without changing area.

This relationship is illustrated by Tissot’s indicatrix, which represents the projected image of an infinitesimal circle. On an equal-area map, indicatrices have equal areas, although their shapes and orientations vary.

A conformal projection, by contrast, preserves local angles and infinitesimal shapes. A projection cannot be both conformal and equal-area throughout an open region of a sphere or ellipsoid. Both properties can hold at particular points or along particular lines, but not across a two-dimensional region.

Equal-area projections also do not generally preserve distance or direction. Distance measured directly on such a map is not necessarily a correct ground distance, even when area measurements are valid.

Principal families

Equal-area is a distortion property rather than a single map shape. It occurs in several projection families.

Family Examples Typical characteristics and uses
Cylindrical Lambert cylindrical equal-area; Gall–Peters Rectangular world maps with straight, perpendicular meridians and parallels; strong shape distortion near the poles
Conic [[albers-equal-area-conic-projection Albers equal-area conic projection]]
Azimuthal [[lambert-azimuthal-equal-area-projection Lambert azimuthal equal-area projection]]
Pseudocylindrical Mollweide; sinusoidal; Eckert IV; Equal Earth World maps that preserve area while distributing shape distortion differently from cylindrical projections
Interrupted or composite Interrupted Goode homolosine Maps divided into lobes to reduce distortion within selected land or ocean regions

An interrupted projection preserves area within its mapped pieces, but continuity is broken along selected cuts. Interruptions can improve the appearance of continents while making routes or relationships across those cuts harder to follow.

The Lambert azimuthal equal-area projection preserves directions from its center in its spherical form, but not distances from that center. Thus, “azimuthal” and “equal-area” describe different properties.

Historical development

Johann Heinrich Lambert presented several important projection constructions in 1772, including cylindrical and azimuthal equal-area forms. Heinrich Christian Albers introduced his equal-area conic projection in 1805, and Karl Brandan Mollweide introduced his equal-area world projection in the same year.

Later developments sought different balances between correct area and recognizable shape. Interrupted projections, including John Paul Goode’s homolosine projection, reduced deformation within selected continental regions by introducing discontinuities.

The cylindrical equal-area design associated with James Gall and later promoted by Arno Peters became prominent in discussions about world-map representation. Its area-preserving property is mathematically valid, but it is neither unique among equal-area projections nor free from shape distortion. Equal Earth, introduced in 2018, is a more recent equal-area world projection designed to combine area fidelity with a familiar overall appearance.

Applications

Thematic mapping

Equal-area projections are widely used for thematic maps in which the apparent extent of a region affects interpretation. Examples include maps of land cover, ecosystems, agricultural land, and administrative territories.

On a choropleth map, color or shading represents a statistical value while region size influences visual prominence. An equal-area projection prevents projection-induced area enlargement from adding another source of imbalance. It does not, however, solve problems caused by unequal reporting-unit sizes, classification choices, or the modifiable areal unit problem.

The contrast with the Mercator projection is particularly important for world maps. Mercator’s area inflation increases strongly toward the poles, making high-latitude regions appear disproportionately large. Equal-area projections remove that specific distortion, although they replace it with changes in shape and other properties.

Spatial analysis

In a geographic information system, equal-area projected coordinates support planar area calculations, area-weighted overlays, and comparisons of regional totals or densities. Applications include measuring land-cover change, habitat extent, and the proportion of a drainage basin occupied by a particular land use.

For raster data, equal-sized cells in an equal-area projected grid represent equal areas on the reference surface, apart from numerical and boundary effects. By contrast, cells with equal angular dimensions in latitude and longitude generally cover smaller areas toward the poles.

Equal-area projection is not the only way to obtain reliable areas. Software can also calculate areas directly on an ellipsoid using appropriate geodesic methods.

Selection and practical limitations

An equal-area projection must be chosen for the extent and purpose of the map. Albers is often suitable for broad mid-latitude regions; Lambert azimuthal equal-area is useful for regions organized around a center; pseudocylindrical projections are common for global displays. None is universally best.

A complete coordinate reference system also specifies the geodetic datum, reference surface, projection parameters, units, and other coordinate conventions. Selecting an equal-area method without matching these components can still produce inconsistent results.

Several practical qualifications remain:

  • Reference-surface compatibility: applying spherical formulas directly to ellipsoidal geographic coordinates does not generally preserve ellipsoidal area exactly.
  • Boundary representation: straight segments joining sparse projected vertices may not accurately represent the projected paths of the original boundaries.
  • Raster reprojection: resampling and partial-cell treatment can change class totals or numerical values even when the target projection is equal-area.
  • Generalization: simplifying coastlines or other boundaries through cartographic generalization can change measured areas independently of projection.
  • Display transformations: uniform enlargement or reduction retains proportional areas, but nonlinear warping may destroy them.

Equal-area preservation is therefore a precise property of a mathematical transformation, not a guarantee that every displayed boundary, computed statistic, or visual interpretation is accurate.