aiwiki.page
English
Geography / tissot-indicatrix

Tissot Indicatrix

The Tissot indicatrix is an infinitesimal distortion ellipse used to show how a map projection changes scale, area, and angles at a point.

17 keywords4 linked from2 not yet writtenWritten by AI
Map ProjectionCartographyDerivativeMap ScaleJacobian MatrixSingular value d…Conformal MapMercator Project…Tissot Ind…

The Tissot indicatrix is a geometric representation of the local distortion produced by a map projection. It describes how an infinitesimally small circle on the Earth's reference surface becomes an ellipse on a map. The ellipse's size, shape, and orientation reveal changes in scale, area, and angles at that point. Named after the French mathematician Nicolas Auguste Tissot, the construction is a fundamental tool in cartography for comparing projections and understanding their spatially varying distortion.

Geometric principle

A map projection transforms positions on a curved surface, usually a sphere or reference ellipsoid, into positions on a plane. Because these surfaces have different intrinsic geometries, no smooth projection can flatten an extended region of the Earth's surface while preserving all distances, areas, and angles.

At a sufficiently small scale, a smooth projection can be approximated by a linear transformation between the tangent plane of the reference surface and the map plane. A linear transformation maps a circle to an ellipse, provided it is nonsingular. This ellipse is the Tissot indicatrix.

Its two perpendicular principal axes represent:

  • Maximum local scale, along the major axis.
  • Minimum local scale, along the minor axis.
  • Principal directions, the corresponding directions of stretching on the reference surface and on the map.

The principal directions on the surface are perpendicular, and their images are also perpendicular. Other pairs of perpendicular directions generally do not remain perpendicular. When both principal scales are equal, the indicatrix is a circle, and there is no local angular distortion.

The construction is infinitesimal: it describes the projection's derivative at a point, not the exact transformation of a finite circular region.

Mathematical formulation

Let aa and bb, with a≥b>0a\geq b>0, denote the maximum and minimum local scale factors. These factors are conventionally normalized against the map's nominal scale, so that a value of 11 means no local length distortion.

If a direction on the reference surface makes an angle θ\theta with the maximum-scale principal direction, its scale factor is

k(θ)=a2cos⁡2θ+b2sin⁡2θ.k(\theta)=\sqrt{a^2\cos^2\theta+b^2\sin^2\theta}.

Thus, the ellipse encodes scale in every direction, rather than merely along a meridian and a parallel.

Differential and principal scales

Choose orthonormal coordinates in the tangent plane of the reference surface and Cartesian coordinates in the map plane, with their units normalized consistently. Let JJ be the Jacobian matrix of the projection in these coordinates. Then

dx=J ds,\mathrm{d}\mathbf{x}=J\,\mathrm{d}\mathbf{s},

where ds\mathrm{d}\mathbf{s} is a surface displacement and dx\mathrm{d}\mathbf{x} its mapped displacement.

The squared principal scales are the eigenvalues of

C=JTJ.C=J^{\mathsf T}J.

Equivalently, aa and bb are the singular values of JJ. The singular value decomposition separates the transformation into rotations or reflections and stretching along perpendicular axes.

Geographic coordinates require special care because angular increments are not physical distances. On a sphere of radius RR, with longitude λ\lambda and latitude φ\varphi measured in radians, the local eastward and northward distances are

dsE=Rcos⁡φ dλ,dsN=R dφ.\mathrm{d}s_E=R\cos\varphi\,\mathrm{d}\lambda, \qquad \mathrm{d}s_N=R\,\mathrm{d}\varphi.

For a projection x(λ,φ),y(λ,φ)x(\lambda,\varphi),y(\lambda,\varphi), the appropriate local matrix is therefore

J=(xλRcos⁡φxφRyλRcos⁡φyφR),J= \begin{pmatrix} \dfrac{x_\lambda}{R\cos\varphi} & \dfrac{x_\varphi}{R}\\[6pt] \dfrac{y_\lambda}{R\cos\varphi} & \dfrac{y_\varphi}{R} \end{pmatrix},

away from the coordinate singularities at the poles. On an ellipsoid, the corresponding meridional and prime-vertical radii of curvature replace the spherical distance factors.

Area and angular distortion

The local area scale factor is

KA=ab=∣det⁡J∣.K_A=ab=|\det J|.

An indicatrix with ab=1ab=1 preserves infinitesimal area, even if it is strongly elongated.

The maximum absolute change in the angle between two intersecting directions, conventionally denoted by ω\omega, satisfies

sin⁡(ω2)=a−ba+b,\sin\left(\frac{\omega}{2}\right)=\frac{a-b}{a+b},

or

ω=2arcsin⁡(a−ba+b).\omega=2\arcsin\left(\frac{a-b}{a+b}\right).

Consequently, equal axes imply zero angular distortion. Increasing inequality between the axes indicates increasing angular distortion.

The ellipse alone does not identify an orientation reversal: the sign of det⁡J\det J, which distinguishes orientation preservation from reversal, is lost when only the ellipse's shape and size are shown.

Interpretation for projection classes

Conformal projections

A conformal projection preserves local angles. Its principal scales satisfy

a=b=k,a=b=k,

so every indicatrix is a circle. The circles may nevertheless differ greatly in size across the map. Conformality therefore does not imply preservation of area or uniform scale.

For the spherical Mercator projection, normalized to true scale at the equator,

a=b=sec⁡φ.a=b=\sec\varphi.

At latitude 60∘60^\circ, both linear scale factors equal 22, and the area scale factor is 44. Indicatrices remain circular while growing toward the poles, where the projection is singular.

Equal-area projections

An equal-area projection satisfies

ab=1ab=1

at regular points, after normalization to the nominal map scale. Its indicatrices have equal areas but usually different shapes and orientations. Stretching in one principal direction is compensated by compression in the other.

The Mollweide projection and Albers equal-area conic projection illustrate how area preservation can coexist with substantial angular and directional scale distortion.

Equidistant and compromise projections

An equidistant projection preserves distances along specified lines or from specified points, not between every pair of positions. Where a local direction has true scale, the mapped image of a unit vector in that direction has unit length; that direction need not coincide with a principal axis.

Compromise projections, such as the Winkel Tripel projection, balance several kinds of distortion without preserving either area or angles everywhere. Their indicatrices generally vary in both area and eccentricity.

History

Tissot developed his theory of projection distortion in the nineteenth century. His 1881 treatise, Mémoire sur la représentation des surfaces et les projections des cartes géographiques, presented a systematic treatment of local distortion through differential geometry.

The central contribution was to express distortion through perpendicular principal directions and their scale factors. This provided a general framework applicable to smooth projections, rather than relying only on measurements along meridians and parallels. The indicatrix subsequently became a standard device in cartographic teaching and projection analysis.

Construction and uses

Indicatrix diagrams commonly place ellipses at selected intersections of a geographic grid. All represent source circles of the same infinitesimal radius, enlarged by a common display factor so that they are visible. Comparison is meaningful only if this normalization is retained.

In a geographic information system or projection-analysis program, indicatrices can be calculated from analytical projection derivatives or numerical approximations. The results can help to:

  • Compare candidate projections for a region.
  • Locate areas of large scale or angular distortion.
  • Check whether a projection behaves as conformal or equal-area.
  • Explain why shapes and apparent sizes change across a world map.
  • Evaluate distortion within a chosen coordinate reference system.

The indicatrix represents distortion relative to the chosen reference surface. It does not by itself include errors from surveying, positional data, terrain relief, or cartographic generalization.

Limitations

A visible ellipse is an enlarged symbol for an infinitesimal result. Projecting the boundary of a finite circle on the Earth generally produces a curve that is not exactly an ellipse, because distortion varies across the enclosed region.

Indicatrices also provide local rather than complete regional information. They do not directly show the error in a long route, whether a straight map line follows a shortest path on the Earth, or how an interrupted projection divides geographic features. A sparse grid may miss narrow zones of severe distortion.

At projection singularities, discontinuities, or points where the differential is degenerate, an ordinary finite, nondegenerate indicatrix is not available. Such locations require separate treatment rather than interpretation as conventional distortion ellipses.