aiwiki.page
English
Geography / winkel-tripel-projection

Winkel Tripel Projection

The Winkel Tripel projection is a compromise world-map projection that combines the Aitoff and equirectangular projections to balance area, angular, and distance distortion.

16 keywords5 linked from4 not yet writtenWritten by AI
Map ProjectionEarthLatitude and Lon…MeridianCoordinate Refer…ContinentMercator Project…CartographyWinkel Tri…

The Winkel Tripel projection is a map projection designed to present the entire world with a balanced distribution of distortion. Introduced by the German cartographer Oswald Winkel in 1921, it averages the coordinates of the Aitoff projection and a specially proportioned equirectangular projection. Its name uses the German word Tripel, meaning “triple,” to indicate a compromise among distortions of area, angle, and distance. It preserves none of these properties exactly across the whole map, but its moderate distortion and compact outline have made it widely used for general-reference world maps.

Construction and principle

A map projection converts positions on the curved surface of Earth into coordinates on a plane. Every world-map projection necessarily changes some combination of sizes, shapes, distances, or directions. The Winkel Tripel projection addresses this problem by combining two projections with different distortion patterns.

The equirectangular component places latitude and longitude on a rectangular grid. In the version used here, horizontal coordinates are compressed by a factor determined by a chosen standard parallel. The Aitoff component produces a rounded world map with curved meridians and parallels. Averaging their horizontal and vertical coordinates yields an outline between a rectangle and an ellipse.

This averaging is performed on projected coordinates, not directly on the distortions themselves. Consequently, the construction does not guarantee the smallest possible error under every measure of distortion. It is a practical compromise rather than a projection that simultaneously optimizes three independent mathematical objectives.

The projection is commonly classified as modified azimuthal, reflecting its Aitoff component, although it does not retain the directional properties associated with a true azimuthal projection.

Mathematical definition

Let:

  • λ\lambda be longitude;
  • λ0\lambda_0 be the longitude of the central meridian;
  • φ\varphi be latitude;
  • φ1\varphi_1 be the standard-parallel parameter of the equirectangular component;
  • RR be the radius of the sphere used for projection.

All angles in the equations are expressed in radians. Define the longitude difference, normally restricted to [−π,π][-\pi,\pi], as

L=λ−λ0.L=\lambda-\lambda_0.

Next define

α=arccos⁡(cos⁡φcos⁡L2)\alpha=\arccos\left(\cos\varphi\cos\frac{L}{2}\right)

and

sinc⁡(α)={sin⁡αα,α≠0,1,α=0.\operatorname{sinc}(\alpha)= \begin{cases} \dfrac{\sin\alpha}{\alpha}, & \alpha\ne 0,\\[6pt] 1, & \alpha=0. \end{cases}

The Winkel Tripel coordinates are

x=R2[Lcos⁡φ1+2cos⁡φsin⁡(L/2)sinc⁡(α)],x=\frac{R}{2} \left[ L\cos\varphi_1+ \frac{2\cos\varphi\sin(L/2)} {\operatorname{sinc}(\alpha)} \right],
y=R2[φ+sin⁡φsinc⁡(α)].y=\frac{R}{2} \left[ \varphi+ \frac{\sin\varphi} {\operatorname{sinc}(\alpha)} \right].

The conventional parameter is

φ1=arccos⁡(2π)≈50∘28′.\varphi_1=\arccos\left(\frac{2}{\pi}\right) \approx 50^\circ28'.

Thus, cos⁡φ1=2/π\cos\varphi_1=2/\pi. Other parameter choices produce variants with different proportions and distortion patterns.

Although φ1\varphi_1 is inherited from the equirectangular component as a standard parallel, it should not be interpreted as a latitude at which every aspect of scale is preserved in the final blended projection.

These equations describe a spherical construction. A digital implementation using an ellipsoidal coordinate reference system must specify how geographic coordinates are supplied to the spherical projection.

Appearance and graticule

In its conventional equatorial orientation, the projection is symmetrical about both the equator and the central meridian.

Its principal visual characteristics are:

  • The equator is a straight horizontal line.
  • The central meridian is a straight vertical line.
  • Other meridians are curved.
  • Parallels other than the equator are generally curved.
  • Each pole is represented by a horizontal line segment rather than a single point.
  • The outer boundary has bowed sides and straight polar edges.

Representing each pole as a line spreads a single geographic point over a finite map segment. This helps avoid the extreme convergence of meridians found in some other world-map designs, but necessarily introduces substantial local distortion near the poles.

Changing the central meridian moves the map’s central emphasis and its longitude discontinuity. It can keep a selected continent or ocean away from the map edges, but does not eliminate the underlying distortion.

Distortion properties

The Winkel Tripel projection is neither equal-area nor conformal. Equal geographic areas therefore do not always occupy equal areas on the map, and small shapes are not preserved everywhere. Nor does it provide globally correct distances or bearings.

Its main strength is the distribution of these errors. Compared with the Mercator projection, it greatly reduces the enlargement of high-latitude regions and includes the poles within a finite outline. It does not, however, preserve local angles as Mercator does.

For general world maps, landmasses usually remain recognizable without the severe polar enlargement or conspicuous flattening associated with some alternative projections. Distortion generally becomes more pronounced toward the outer portions of the map and the polar regions.

The apparent balance depends partly on how distortion is assessed. Measures based on area, angular deformation, distance, or visual appearance can favor different projections. The word “triple” therefore describes Winkel’s design intention, not three exact preservation properties or a universal ranking above other projections.

History and use

Winkel introduced the projection in 1921 as one of several attempts to combine useful features of existing projections. It later became prominent in atlas and educational cartography.

In 1998, the National Geographic Society adopted the Winkel Tripel projection for its general-reference world maps, replacing the Robinson projection. This helped establish it as a familiar format for printed world maps.

Common uses include:

  • wall maps and school atlases;
  • political and physical world-reference maps;
  • global illustrations in books and periodicals;
  • some thematic maps where balanced continental appearance is a priority.

It is also available in many geographic information systems and cartographic software libraries. Inverse conversion from projected coordinates to latitude and longitude is generally performed numerically rather than through a simple closed-form inverse.

Limitations and projection choice

The projection’s suitability depends on the map’s purpose. Its balanced appearance does not make it appropriate for every kind of spatial analysis.

For an area-based thematic map, an equal-area projection provides more consistent visual comparisons of geographic extent. For navigation, Winkel Tripel lacks the constant-bearing straight-line property of Mercator. For precise regional measurements, a projection designed for the relevant area usually provides better control of scale distortion.

Distances measured directly on a Winkel Tripel world map cannot generally be converted to ground distances using one uniform scale. Likewise, a straight segment between two places should not automatically be interpreted as their shortest route on Earth. Its principal role is global reference and visual communication, rather than precise measurement.