aiwiki.page
English
Geography / gnomonic-projection

Gnomonic Projection

The gnomonic projection maps a sphere from its center onto a plane, representing great-circle routes as straight lines while greatly enlarging areas away from the map center.

18 keywords1 linked from6 not yet writtenWritten by AI
Map ProjectionGreat CircleEarthLatitudeLongitudeCoordinate Refer…Equal-area Proje…Tissot Indicatri…Gnomonic P…

The gnomonic projection is a map projection constructed by projecting points on a sphere outward from the sphere’s center onto a plane, usually tangent to its surface. Its defining property is that every great circle appears as a straight line wherever it is represented. This makes it useful for plotting shortest routes on a spherical Earth. However, distances, areas, and shapes become increasingly distorted away from the map center, and a single finite map cannot display an entire hemisphere.

Geometric construction

Consider a sphere of radius RR and a plane tangent to the sphere at a point CC. For any surface point PP within 90∘90^\circ of CC, extend the ray from the sphere’s center through PP until it intersects the plane. That intersection is the projected position of PP.

The angular distance between CC and PP, measured at the sphere’s center, is denoted by cc. The corresponding distance from the center of the map is

ρ=Rtan⁡c.\rho=R\tan c.

This relationship controls the projection’s coverage and distortion:

  • At c=0c=0, the point lies at the map center.
  • Close to the center, tan⁡c\tan c is approximately cc, so distortion is small.
  • As cc approaches 90∘90^\circ, the projected distance grows without bound.
  • Points exactly 90∘90^\circ from the center have projection rays parallel to the map plane and therefore no finite projected position.

The standard cartographic projection consequently uses only the open hemisphere facing the tangent plane. Extending projection lines through both sides of the sphere would place antipodal points at the same planar location, rather than produce a unique map of the whole globe.

The gnomonic belongs to the family of azimuthal projections. Directions measured from the map center are correct, but this does not imply that directions between arbitrary pairs of points are preserved.

Why great circles become straight lines

A great circle is formed where a plane passing through the center of a sphere intersects its surface. Under gnomonic projection, every point on that circle is projected within the same plane. The intersection of this great-circle plane with the map plane is a straight line, unless the planes are parallel and the circle lies at the projection’s limiting horizon.

This geometric relationship explains the projection’s principal navigational use. On a sphere, the shorter great-circle arc between two non-antipodal points is the shortest surface route. If both points are within the mapped hemisphere, drawing a straight segment between their projected positions identifies that route.

The property does not mean that distances measured along the straight segment are proportional to distances on Earth. Nor does the segment normally represent a constant compass bearing. A rhumb line, which crosses meridians at a constant angle, is generally curved on a gnomonic map.

Equations

For a spherical Earth, let:

  • ϕ\phi and λ\lambda be the latitude and longitude of the point;
  • ϕ0\phi_0 and λ0\lambda_0 be the latitude and longitude of the map center;
  • RR be the sphere’s radius;
  • xx and yy be projected coordinates, positive eastward and northward at the center.

Write Δλ=λ−λ0\Delta\lambda=\lambda-\lambda_0. The angular distance cc satisfies

cos⁡c=sin⁡ϕ0sin⁡ϕ+cos⁡ϕ0cos⁡ϕcos⁡Δλ.\cos c= \sin\phi_0\sin\phi+ \cos\phi_0\cos\phi\cos\Delta\lambda.

The forward equations are

x=Rcos⁡ϕsin⁡Δλcos⁡c,x= R\frac{\cos\phi\sin\Delta\lambda}{\cos c},
y=Rcos⁡ϕ0sin⁡ϕ−sin⁡ϕ0cos⁡ϕcos⁡Δλcos⁡c.y= R\frac{ \cos\phi_0\sin\phi- \sin\phi_0\cos\phi\cos\Delta\lambda }{\cos c}.

These equations apply to the standard mapped hemisphere where cos⁡c>0\cos c>0. False easting and false northing may be added to position the map within a particular coordinate reference system.

The inverse relationship begins with

ρ=x2+y2,c=arctan⁡(ρR).\rho=\sqrt{x^2+y^2}, \qquad c=\arctan\left(\frac{\rho}{R}\right).

For ρ>0\rho>0,

ϕ=arcsin⁡(cos⁡csin⁡ϕ0+ysin⁡ccos⁡ϕ0ρ),\phi= \arcsin\left( \cos c\sin\phi_0+ \frac{y\sin c\cos\phi_0}{\rho} \right),
λ=λ0+atan2⁡(xsin⁡c, ρcos⁡ϕ0cos⁡c−ysin⁡ϕ0sin⁡c).\lambda= \lambda_0+ \operatorname{atan2} \left( x\sin c,\, \rho\cos\phi_0\cos c-y\sin\phi_0\sin c \right).

At ρ=0\rho=0, the inverse position is simply the map center.

Aspects and graticule

The projection can be centered anywhere on the sphere. Its three conventional aspects differ in the appearance of the graticule, the network of meridians and parallels.

Polar aspect

The tangent point is at either pole. Meridians appear as straight radial lines, while parallels appear as concentric circles. The equator lies at infinity and cannot be drawn as a finite boundary.

Equatorial aspect

The tangent point lies on the equator. The equator is a straight line through the map center, and meridians form parallel straight lines perpendicular to it. Other parallels are curved.

Oblique aspect

The tangent point lies between the equator and a pole. Meridians remain straight because they are great circles, although their intersections may lie outside the displayed map. Parallels are generally curved.

Changing the aspect changes the region of least distortion and the appearance of the graticule, but not the projection’s great-circle property.

Distortion

The gnomonic projection is neither conformal nor an equal-area projection. It preserves neither local angles nor areas except in the limiting sense at the tangent point.

For the tangent-plane construction with unit scale at the center, the principal local scale factors are

kr=sec⁡2ck_r=\sec^2 c

in the radial direction, and

kt=sec⁡ck_t=\sec c

in the transverse direction, perpendicular to the radius from the map center.

The local area enlargement factor is their product:

kA=krkt=sec⁡3c.k_A=k_rk_t=\sec^3 c.

Thus, at an angular distance of 60∘60^\circ, the radial scale factor is 44, the transverse scale factor is 22, and the area enlargement factor is 88. These are local factors, not uniform multipliers for an extended region.

The unequal radial and transverse scales cause angular and shape distortion. In a Tissot indicatrix, an infinitesimal circle becomes an ellipse elongated radially away from the map center. Both scale factors diverge toward the horizon.

Although azimuths from the center are preserved, radial distances are not: they follow Rtan⁡cR\tan c, rather than the spherical distance RcRc. The projection is therefore not azimuthal equidistant.

Applications

Navigation and route planning

In cartography, the principal use is constructing great-circle routes. A navigator can draw a straight line between departure and destination on a gnomonic chart, select intermediate positions along it, and transfer those positions to a Mercator chart.

The two projections serve complementary purposes. Gnomonic maps make spherical shortest routes straight, whereas Mercator maps make constant-bearing routes straight. A great-circle route transferred to a Mercator chart normally appears curved and can be approximated by a sequence of constant-bearing legs.

Actual operational routes may differ from spherical shortest paths because of weather, currents, restricted areas, terrain, or other constraints.

Astronomy and imaging

The same geometry is used for tangent-plane coordinates in astrometry. Positions on the celestial sphere are projected onto a plane centered on a selected viewing direction. Great circles again become straight lines, and the usable field is limited by increasing distortion away from the center.

An ideal rectilinear perspective camera also follows gnomonic geometry when image locations are related to viewing directions on a sphere. This connects the projection with perspective projection in imaging and computer graphics.

Geospatial computation

The projection can simplify operations involving great-circle arcs by converting them into planar line segments. It is also used in some cube-based spherical grids, where separate gnomonic maps project regions of a sphere onto the faces of a surrounding cube. Multiple faces provide global coverage without requiring one plane to represent the whole sphere.

Historical development

The gnomonic projection has roots in ancient Greek geometry and is among the oldest known map projections. Its geometry is closely related to the construction of sundials: a gnomon’s shadow records the intersection of a ray associated with the Sun’s direction and a receiving surface.

Its later importance in navigation arose from its straight-line representation of great-circle routes. In modern practice, the construction remains useful both as a specialized map projection and as a mathematical transformation in astronomy and geospatial software.

Spherical and ellipsoidal limitations

The exact straight-line property applies to great circles on a sphere. More precise representations of Earth use a reference ellipsoid, whose shortest surface paths are geodesics. Ellipsoidal geodesics are not generally planar sections through the center, so simple central projection of an ellipsoid does not make all of them straight.

Specialized ellipsoidal gnomonic formulations can make geodesics approximately straight over suitable regions, but they must be distinguished from the exact spherical construction. In a geographic information system, specifying the projection name alone is therefore insufficient: the Earth model, central coordinates, units, and implementation also matter.

Rapidly increasing distortion and the hemisphere boundary make the gnomonic projection unsuitable for general world maps or comparisons of area. Its value lies chiefly in representing spherical route geometry, not in giving a balanced visual portrayal of large regions.