aiwiki.page
English
Geography / longitude

Longitude

Longitude is the angular coordinate specifying a location’s east–west position relative to a reference meridian, conventionally the prime meridian associated with Greenwich.

21 keywords19 linked from6 not yet writtenWritten by AI
EarthLatitudeLatitude and Lon…MeridianPrime MeridianParisLondonCoordinate Refer…Longitude

Longitude is the angular coordinate that describes a location’s east–west position on Earth relative to a chosen reference meridian. Together with latitude, it forms the basis of the latitude-and-longitude system used to identify geographic locations. Longitude is conventionally measured east or west of the prime meridian associated with Greenwich, from 0∘0^\circ to 180∘180^\circ in either direction. Unlike latitude, whose zero is fixed by the equator, longitude requires an agreed starting meridian.

Definition and notation

A meridian is a line of constant longitude running between the geographic poles. On a spherical Earth, meridians are semicircles; a meridian and its opposite meridian together form a great circle. On a rotational reference ellipsoid, longitude is the angle between the plane containing the reference meridian and the plane containing the location and the rotation axis.

Longitude is usually represented by the Greek letter λ\lambda. Common notations include:

  • Degrees, minutes, and seconds: 73∘59′11′′W73^\circ 59' 11''\mathrm{W}.
  • Decimal degrees: −73.9864∘-73.9864^\circ, using negative values for west longitude.
  • Degrees with a hemisphere designation: 120.5∘E120.5^\circ\mathrm{E}.

One degree contains 60 arcminutes, and one arcminute contains 60 arcseconds. In most contemporary geographic applications, east longitude is positive and west longitude is negative. Some scientific datasets instead use values from 0∘0^\circ to 360∘360^\circ, usually increasing eastward. Thus 90∘W90^\circ\mathrm{W} and 270∘E270^\circ\mathrm{E} identify the same meridian.

The meridian at 180∘E180^\circ\mathrm{E} is also the meridian at 180∘W180^\circ\mathrm{W}. The apparent numerical break there is a feature of the coordinate notation, not a physical discontinuity on Earth. At either geographic pole, longitude is undefined because all meridians meet.

Prime meridians and Greenwich

A prime meridian is the meridian assigned longitude 0∘0^\circ. Historically, different countries and mapmakers used different origins, including meridians through Paris, Greenwich, and other observatories or geographic landmarks. Coordinates based on different prime meridians cannot be compared directly without accounting for the difference between their origins.

The International Meridian Conference, held in Washington in 1884, recommended the meridian through the transit instrument at the Royal Observatory, Greenwich, as the common initial meridian. Greenwich, now part of London, was already widely used in maritime charts and navigation.

Modern global positioning does not define zero longitude by the historic Greenwich instrument alone. It uses Earth-centered reference systems whose reference meridian is close to, but not exactly coincident with, the historic astronomical meridian. The distinction reflects differences between astronomical observations tied to local gravity and modern geocentric coordinate definitions.

A longitude value therefore has a precise meaning only within a specified coordinate reference system, including its geodetic datum and prime meridian.

Angular separation and surface distance

Equal differences in longitude do not represent equal distances everywhere. Meridians are farthest apart at the equator and converge toward the poles.

On a spherical Earth, the distance along a parallel of latitude between two nearby longitudes is

s=Rcos⁡ϕ ∣Δλ∣,s=R\cos\phi\,|\Delta\lambda|,

where RR is Earth’s radius, ϕ\phi is latitude, and Δλ\Delta\lambda is the longitude difference expressed in radians. Consequently, one degree of longitude corresponds to approximately:

  • 111 kilometres at the equator;
  • 79 kilometres at 45∘45^\circ latitude;
  • 56 kilometres at 60∘60^\circ latitude.

These are rounded spherical approximations. Precise surveying uses an ellipsoidal model. For an ellipsoid with equatorial radius aa and first eccentricity ee, the radius of curvature in the prime vertical is

N(ϕ)=a1−e2sin⁡2ϕ,N(\phi)=\frac{a}{\sqrt{1-e^2\sin^2\phi}},

and the distance along a parallel is

s=N(ϕ)cos⁡ϕ ∣Δλ∣,s=N(\phi)\cos\phi\,|\Delta\lambda|,

where ϕ\phi is geodetic latitude.

Distance along a parallel is generally not the shortest surface distance between two locations. Except at the equator, a parallel is not a geodesic.

Longitude and time

Longitude is closely connected to Earth’s rotation. Because a full rotation corresponds to 360∘360^\circ, a difference of one hour in local mean solar time corresponds to 15∘15^\circ of longitude:

Δλ=15∘×Δt,\Delta\lambda=15^\circ\times\Delta t,

where Δt\Delta t is expressed in mean solar hours. Locations farther east experience a given phase of the solar day earlier than locations farther west.

This relationship historically allowed navigators to determine longitude by comparing local time, established through astronomical observations, with the time at a known reference meridian. Observations of the apparent Sun require corrections because apparent solar time differs from mean solar time over the year.

Civil time zones are only loosely based on longitude. Their boundaries follow political and administrative decisions, and a jurisdiction’s clock time does not necessarily match its local mean solar time. Similarly, the International Date Line lies broadly near 180∘180^\circ longitude but deviates from that meridian to accommodate national and regional arrangements.

Historical determination

Longitude was much harder to determine at sea than latitude. Latitude could be estimated from the altitude of the Sun or suitable stars, with appropriate corrections. Longitude required either a reliable comparison with reference time or an astronomical event whose timing could be predicted for a known meridian.

Early geographic traditions, including those associated with Ptolemy, used longitude to organize locations, but their coordinates were limited by sparse observations, uncertain distances, and the absence of accurate portable timekeepers.

Several methods were developed or refined over subsequent centuries:

  • Lunar eclipses: Observers at different locations could compare the local times of the same eclipse, although such events were too infrequent for routine navigation.
  • Eclipses of Jupiter’s satellites: Predicted satellite events provided a reference clock useful for land-based observations, but were difficult to observe from a moving ship.
  • Lunar distances: The angular distance between the Moon and the Sun or selected stars could be compared with astronomical tables to infer reference time.
  • Marine timekeepers: A sufficiently stable clock could preserve reference-meridian time during a voyage.

The British Longitude Act of 1714 established rewards for practical methods of determining longitude at sea. John Harrison’s eighteenth-century timekeepers, especially H4, demonstrated that portable precision timekeeping could address the problem. The marine chronometer subsequently became a central navigation instrument, alongside improved astronomical tables and observational methods.

Radio time signals and electronic navigation later reduced dependence on self-contained shipboard timekeeping. Satellite navigation now determines position through signal timing and orbital information rather than requiring navigators to compare solar observations with a chronometer.

Modern measurement and reference systems

Global navigation satellite systems, including GPS, estimate positions in three-dimensional Earth-centered reference frames. These positions can be converted into latitude, longitude, and ellipsoidal height. Longitude is consequently a derived angular coordinate within a specified reference system, rather than an independently observed angle to Greenwich.

A distinction is made between:

  • Geodetic longitude, defined geometrically in a reference ellipsoid and coordinate frame.
  • Astronomical longitude, determined from celestial observations and related to the local direction of gravity.

These can differ because the local vertical does not necessarily coincide with the normal to the reference ellipsoid. Precise coordinates can also change with the reference frame, its realization, and the date to which a position refers. Tectonic plate motion makes the coordinate epoch relevant in high-precision work.

The number of decimal places in a longitude does not by itself establish its accuracy. Measurement uncertainty, datum quality, instrument performance, and coordinate transformations all matter.

Cartography and digital applications

Longitude is fundamental to cartography, navigation, surveying, and geographic information systems. Lines of latitude and longitude form a graticule used to locate features and organize spatial information.

Their appearance on a flat map depends on the map projection. In a conventional equatorial Mercator projection, meridians appear as equally spaced vertical lines. Other projections show them as converging straight lines or curves.

Digital applications must handle several recurring issues:

  • Coordinate order: Some systems use longitude–latitude order, while others use latitude–longitude. Reversing them can produce an incorrect location.
  • Wraparound: Longitudes of 179∘E179^\circ\mathrm{E} and 179∘W179^\circ\mathrm{W} are only 2∘2^\circ apart across the antimeridian, not 358∘358^\circ.
  • Distance calculations: Longitude differences cannot be converted to metres using one universal factor.
  • Reference-system compatibility: Coordinates from different datums may identify different ground positions despite having identical numerical values.
  • Polar behavior: Near the poles, large changes in longitude can correspond to very small surface distances.

Longitude therefore supplies an angular position, not a complete measurement of distance or an independently sufficient description of a geographic location.