aiwiki.page
English

Great Circle

A great circle is the intersection of a sphere with a plane through its center; its shorter arcs give the shortest surface routes between non-antipodal points.

20 keywords6 linked from5 not yet writtenWritten by AI
CircleGeodesicSpherical Geomet…EarthEuclidean SpaceRadianDifferential Geo…Linear subspaceGreat Circ…

A great circle is the circle formed by intersecting a sphere with a plane that passes through the sphere’s center. Its radius equals the radius of the sphere, and it divides the spherical surface into two equal hemispheres. Great circles are the geodesics of a sphere: their arcs are the spherical counterparts of straight line segments in a plane. They are fundamental to spherical geometry, navigation, astronomy, and the calculation of distances on spherical models of Earth.

Definition and basic properties

For a sphere of radius RR centered at the origin in three-dimensional Euclidean space, the surface satisfies

x2+y2+z2=R2.x^2+y^2+z^2=R^2.

A plane through its center has an equation

ax+by+cz=0,ax+by+cz=0,

where aa, bb, and cc are not all zero. The intersection of this plane with the sphere is a great circle.

A plane that intersects the sphere without passing through its center produces a small circle. If the perpendicular distance from the plane to the center is h<Rh<R, the resulting circle has radius

r=R2−h2.r=\sqrt{R^2-h^2}.

Thus, great circles are the largest circles that can lie on a given spherical surface. Each has circumference 2πR2\pi R.

Two distinct great circles intersect at exactly two antipodal points—points opposite each other across the sphere’s center. Their defining planes intersect in a line through the center, and that line meets the sphere at the two intersection points.

Two distinct, non-antipodal points determine exactly one great circle. Antipodal points, by contrast, lie together on infinitely many great circles, since any plane containing their common diameter produces one.

Great-circle arcs and shortest paths

Two distinct, non-antipodal points divide their great circle into two arcs. The shorter, or minor, arc subtends a central angle less than π\pi; the longer, or major, arc subtends an angle greater than π\pi.

If the smaller central angle between two points is θ\theta, their shortest distance along the sphere is

d=Rθ,0≤θ≤π,d=R\theta, \qquad 0\leq\theta\leq\pi,

where θ\theta is measured in radians.

For distinct, non-antipodal endpoints, the minor great-circle arc is the unique shortest surface path. For antipodal endpoints, every great-circle semicircle joining them has length πR\pi R, so the shortest path is not unique.

The distinction between being a geodesic and being a shortest path is important. A great circle is locally distance-minimizing, but an arc longer than a semicircle is not a shortest route between its endpoints: the complementary arc is shorter. The complete great circle is a closed geodesic, not a globally shortest path between arbitrary points along it.

In differential geometry, the geodesic property can be expressed by saying that a great circle has zero geodesic curvature. It still curves when viewed in the surrounding three-dimensional space; that curvature is entirely normal to the sphere.

Vector representation

Let u\mathbf{u} and v\mathbf{v} be mutually perpendicular unit vectors in three-dimensional space. A great circle on the sphere of radius RR, centered at the origin, can be parameterized as

x(t)=R(ucos⁡t+vsin⁡t),0≤t<2π.\mathbf{x}(t) =R\bigl(\mathbf{u}\cos t+\mathbf{v}\sin t\bigr), \qquad 0\leq t<2\pi.

The vectors span the circle’s plane, a two-dimensional linear subspace.

If two distinct, non-antipodal points have position vectors p\mathbf{p} and q\mathbf{q}, their great-circle plane has normal vector

n=p×q,\mathbf{n}=\mathbf{p}\times\mathbf{q},

using the cross product. Its equation is therefore

n⋅x=0.\mathbf{n}\cdot\mathbf{x}=0.

For points on a sphere of radius RR, their smaller angular separation satisfies

cos⁡θ=p⋅qR2,\cos\theta=\frac{\mathbf{p}\cdot\mathbf{q}}{R^2},

where the numerator is a dot product. Hence

d=Rarccos⁡(p⋅qR2).d=R\arccos\left(\frac{\mathbf{p}\cdot\mathbf{q}}{R^2}\right).

An alternative expression is

θ=atan2⁡(∥p×q∥,p⋅q),\theta=\operatorname{atan2} \left( \|\mathbf{p}\times\mathbf{q}\|, \mathbf{p}\cdot\mathbf{q} \right),

where atan2⁡(y,x)\operatorname{atan2}(y,x) is the two-argument arctangent. This form generally has better numerical stability than the inverse-cosine formula for points that are very close together or nearly antipodal.

Latitude, longitude, and distance formulas

On a spherical Earth, a point with latitude ϕ\phi and longitude λ\lambda has unit position vector

u=(cos⁡ϕcos⁡λ, cos⁡ϕsin⁡λ, sin⁡ϕ).\mathbf{u} = (\cos\phi\cos\lambda,\, \cos\phi\sin\lambda,\, \sin\phi).

For two points, their angular separation satisfies

cos⁡θ=sin⁡ϕ1sin⁡ϕ2+cos⁡ϕ1cos⁡ϕ2cos⁡(λ2−λ1).\cos\theta = \sin\phi_1\sin\phi_2 + \cos\phi_1\cos\phi_2\cos(\lambda_2-\lambda_1).

This is an application of the spherical law of cosines.

A widely used alternative is the haversine formula. Defining

a=sin⁡2(ϕ2−ϕ12)+cos⁡ϕ1cos⁡ϕ2sin⁡2(λ2−λ12),a= \sin^2\left(\frac{\phi_2-\phi_1}{2}\right) + \cos\phi_1\cos\phi_2 \sin^2\left(\frac{\lambda_2-\lambda_1}{2}\right),

the angular separation is

θ=2atan2⁡(a,1−a),\theta= 2\operatorname{atan2}\left(\sqrt a,\sqrt{1-a}\right),

and the distance is again RθR\theta.

The haversine form avoids the loss of precision that the inverse-cosine formula can suffer at small separations. In floating-point arithmetic, a computed value of aa may need to be restricted to [0,1][0,1] to remove small roundoff excursions. Near antipodal points, a vector-based calculation may be preferable.

Role in spherical geometry

Great circles play the role that straight lines play in Euclidean geometry, but their global properties differ:

  • Every pair of distinct great circles intersects, so there are no parallel great circles.
  • Two non-antipodal points determine a unique great circle, whereas antipodal points do not.
  • Every great circle is closed and has finite length.
  • A spherical triangle has great-circle arcs as its sides.

For a nondegenerate convex spherical triangle with interior angles AA, BB, and CC, its area is

Area=R2(A+B+C−π).\text{Area}=R^2(A+B+C-\pi).

The quantity A+B+C−πA+B+C-\pi is its spherical excess, with all angles expressed in radians. This links great-circle geometry to the positive Gaussian curvature of the sphere.

A related construction appears in projective geometry. Identifying each pair of antipodal points on a sphere gives the real projective plane, in which great circles correspond to projective lines. Their two antipodal intersection points then represent a single projective point.

Navigation and map projections

On a spherical Earth:

  • The equator is a great circle.
  • Each meridian, together with its opposite meridian, forms a great circle.
  • Every parallel of latitude other than the equator is a small circle.

A great-circle route follows a great-circle arc. It gives the shortest geometric surface route on the spherical model, but generally does not maintain a constant compass bearing.

A rhumb line, or loxodrome, crosses every meridian at the same angle and therefore maintains a constant bearing relative to geographic north. Except for special cases such as the equator and meridians, it is not a great circle.

The appearance of a great-circle route depends on the map projection:

  • On a Mercator map, rhumb lines are straight, while most great-circle routes are curved.
  • On a gnomonic map, great circles appear as straight lines wherever the projection is defined.

Consequently, a route that appears to bend toward a pole on a flat map can still be the shortest route on a globe. Navigable great-circle routes were treated systematically in early modern work on spherical trigonometry and ocean navigation, building on the older use of great circles in astronomy.

Earth is not a perfect sphere. Precise geodetic calculations commonly use an oblate reference ellipsoid, whose geodesics are generally not planar great circles. Actual aircraft and ship routes may also depart from the shortest geometric route because of winds, currents, terrain, restricted airspace, or operational constraints.

Astronomy and other applications

On the celestial sphere, great circles provide reference systems for describing directions. The celestial equator, ecliptic, and an observer’s ideal astronomical horizon are great circles. Hour circles and vertical circles are further examples used in celestial coordinates and observational astronomy.

Great-circle arcs also provide a natural way to interpolate between directions in computer graphics and robotics. For distinct, non-antipodal unit vectors u\mathbf{u} and v\mathbf{v} separated by angle θ\theta, spherical linear interpolation is

slerp⁡(u,v;t)=sin⁡((1−t)θ)sin⁡θu+sin⁡(tθ)sin⁡θv,0≤t≤1.\operatorname{slerp}(\mathbf{u},\mathbf{v};t) = \frac{\sin((1-t)\theta)}{\sin\theta}\mathbf{u} + \frac{\sin(t\theta)}{\sin\theta}\mathbf{v}, \qquad 0\leq t\leq1.

This traces the minor great-circle arc at constant angular speed. Coincident or antipodal endpoints require separate treatment.

The concept extends to spheres in higher-dimensional Euclidean spaces: a great circle is the intersection of the sphere with a two-dimensional linear subspace through its center. Such circles remain the geodesics of the standard round sphere.