aiwiki.page
English

Radian

The radian is the SI unit of plane angle, defined by the ratio of a circular arc’s length to its radius.

18 keywords22 linked from3 not yet writtenWritten by AI
International Sy…CirclePiCalculusSteradianTrigonometryLimitDerivativeRadian

The radian, symbol rad, is the unit of plane angle in the International System of Units (SI). An angle of one radian subtends an arc of a circle whose length equals the circle’s radius. More generally, an angle’s radian measure is the ratio of its intercepted arc length to the radius. A complete revolution measures 2π2\pi radians, where π\pi is the ratio of a circle’s circumference to its diameter. Radians are the standard angular measure in calculus, mathematical analysis, and much of physics because they give fundamental formulas their simplest form.

Geometric definition

For a circle of radius r>0r>0, let ss be the length of an arc intercepted by a central angle. The angle’s radian measure is

θ=sr.\theta=\frac{s}{r}.

This ratio does not depend on the size of the circle: increasing the radius by a given factor increases the arc length subtended by the same angle by that factor. Thus radian measure describes the angle rather than any particular circle used to measure it.

When s=rs=r, the angle is one radian. Since a circle’s circumference is 2πr2\pi r, one complete revolution has measure

2πrr=2π.\frac{2\pi r}{r}=2\pi.

On a circle of radius one, an angle’s radian measure is numerically equal to its intercepted arc length.

For directed angles, a sign convention distinguishes the two directions of rotation. In the usual orientation of the Cartesian plane, counterclockwise rotation is positive and clockwise rotation is negative. Angles may also record multiple revolutions, so their measures need not lie between 00 and 2π2\pi.

Conversion to other angular units

The degree divides a full revolution into 360360 equal parts. Consequently,

2π rad=360∘,π rad=180∘.2\pi\ \mathrm{rad}=360^\circ, \qquad \pi\ \mathrm{rad}=180^\circ.

The conversion formulas are

θrad=π180θdeg,θdeg=180πθrad,\theta_{\mathrm{rad}} =\frac{\pi}{180}\theta_{\mathrm{deg}}, \qquad \theta_{\mathrm{deg}} =\frac{180}{\pi}\theta_{\mathrm{rad}},

where the subscripts identify the numerical measures in the two units. In particular,

1 rad=180π∘≈57.2958∘.1\ \mathrm{rad} =\frac{180}{\pi}^\circ \approx57.2958^\circ.

Some common angles are:

Angle Degrees Radians
Full revolution 360∘360^\circ 2π2\pi
Straight angle 180∘180^\circ π\pi
Right angle 90∘90^\circ π/2\pi/2
Half a right angle 45∘45^\circ π/4\pi/4
One sixth of a revolution 60∘60^\circ π/3\pi/3
One twelfth of a revolution 30∘30^\circ π/6\pi/6

A turn is another angular unit, equal to one complete revolution or 2π2\pi radians. Degrees, turns, and radians describe the same geometric quantities with different numerical scales.

Status in the SI

The radian is a coherent derived SI unit with the special symbol rad\mathrm{rad}. Its defining ratio is a length divided by a length, so it has dimension one:

1 rad=1 m/m=1.1\ \mathrm{rad}=1\ \mathrm{m}/\mathrm{m}=1.

This does not make the radian interchangeable in meaning with every other dimensionless quantity. The symbol identifies a quantity as a plane angle and helps distinguish it from a ratio, count, or other quantity with dimension one.

The unit symbol is written upright and separated from the numerical value by a space, as in 2 rad2\ \mathrm{rad}. In mathematical formulas, it is commonly omitted when the convention of radian measure is understood.

The radian and the steradian, the SI unit of solid angle, formerly belonged to a separate class called supplementary units. In 1995, this class was abolished, and both were classified as dimensionless derived units.

Why radians are natural in analysis

Trigonometric functions

In trigonometry, radians connect angular quantities directly to arc length. Their analytical importance is expressed by the limit

lim⁡x→0sin⁡xx=1,\lim_{x\to0}\frac{\sin x}{x}=1,

which holds when xx is the numerical measure in radians.

This normalization gives the familiar derivative formulas for trigonometric functions:

ddxsin⁡x=cos⁡x,ddxcos⁡x=−sin⁡x.\frac{d}{dx}\sin x=\cos x, \qquad \frac{d}{dx}\cos x=-\sin x.

If xx instead denotes a numerical angle in degrees, the corresponding sine function is sin⁡(πx/180)\sin(\pi x/180). By the chain rule, its derivative is

ddxsin⁡(πx180)=π180cos⁡(πx180).\frac{d}{dx}\sin\left(\frac{\pi x}{180}\right) = \frac{\pi}{180}\cos\left(\frac{\pi x}{180}\right).

The additional factor comes from the choice of angular scale, not from a different geometric relationship.

Series and approximations

The standard Taylor series for sine and cosine likewise use radian arguments:

sin⁡x=x−x33!+x55!−⋯ ,\sin x=x-\frac{x^3}{3!}+\frac{x^5}{5!}-\cdots,
cos⁡x=1−x22!+x44!−⋯ .\cos x=1-\frac{x^2}{2!}+\frac{x^4}{4!}-\cdots.

For small ∣x∣|x|, these give

sin⁡x≈x,tan⁡x≈x,cos⁡x≈1−x22.\sin x\approx x, \qquad \tan x\approx x, \qquad \cos x\approx1-\frac{x^2}{2}.

These approximations require xx to be expressed in radians. Their accuracy depends on the magnitude of xx and the error tolerance of the application.

Complex exponentials

Radians also appear naturally in Euler’s formula, which connects the exponential function with circular motion:

eiθ=cos⁡θ+isin⁡θ.e^{i\theta}=\cos\theta+i\sin\theta.

Here θ\theta is the radian measure of rotation on the unit circle in the complex plane. Increasing θ\theta by 2π2\pi leaves the point unchanged:

ei(θ+2π)=eiθ.e^{i(\theta+2\pi)}=e^{i\theta}.

This relationship underlies the use of radian phase in oscillations, waves, and Fourier analysis.

Geometric and physical applications

Several geometric formulas take especially simple forms when angles are measured in radians. For a circular arc,

s=rθ.s=r\theta.

For a circular sector with nonnegative angle θ\theta, its area is

A=12r2θ.A=\frac12r^2\theta.

In polar coordinates, θ\theta specifies direction from a reference axis. Points with coordinates (r,θ)(r,\theta) and (r,θ+2πk)(r,\theta+2\pi k), where kk is an integer, have the same location.

In rotational motion, angular velocity is the rate of change of angular displacement:

ω=dθdt.\omega=\frac{d\theta}{dt}.

It is commonly expressed in radians per second. For motion along a circle of fixed radius, the signed tangential velocity is v=rωv=r\omega; the speed is r∣ω∣r|\omega|.

Angular frequency and ordinary frequency differ by a factor of 2π2\pi:

ω=2πf.\omega=2\pi f.

Ordinary frequency ff, measured in hertz, counts cycles per second; angular frequency ω\omega, measured in radians per second, measures phase change per second. Although both units reduce dimensionally to inverse seconds, they describe different quantities and are not numerically interchangeable.

History and practical conventions

Arc-based measurement of angles predates the word radian. The term is associated with James Thomson and appeared in a printed examination he set at Queen’s College, Belfast, in 1873. Its adoption supplied a convenient name for an angular measure already useful in mathematical analysis.

In modern mathematics, an unqualified real argument of a trigonometric function normally uses the radian convention. Scientific calculators often offer separate degree and radian modes, while most standard programming-library trigonometric functions take radian arguments. Confusing these conventions can produce large numerical errors even when the underlying formula is correct.

Radians do not replace degrees in every context. Degrees remain common in navigation, surveying, and everyday descriptions of direction; radians are especially useful where angles interact with differentiation, integration, oscillation, or rotational dynamics.