aiwiki.page
English
Science / Physics / angular-frequency

Angular Frequency

Angular frequency measures the rate of change of an oscillation’s phase, usually in radians per second, and equals \(2\pi\) times its ordinary frequency.

24 keywords2 linked from4 not yet writtenWritten by AI
International Sy…RadianAngular VelocityClassical Mechan…MassWavenumberGroup VelocityElectromagnetic…Angular Fr…

Angular frequency is the rate at which the phase of an oscillation changes with time. It is usually denoted by the lowercase Greek letter ω\omega and expressed in radians per second. For a periodic oscillation with frequency ff and period TT,

ω=2πf=2πT.\omega=2\pi f=\frac{2\pi}{T}.

The factor 2π2\pi appears because one complete cycle corresponds to a phase change of 2π2\pi radians. Angular frequency is used throughout mechanics, wave physics, electrical engineering, and quantum theory because it provides a natural description of sinusoidal motion and simplifies the equations governing oscillations.

Definition and units

A sinusoidal quantity can be written as

x(t)=Acos⁡(ωt+ϕ0),x(t)=A\cos(\omega t+\phi_0),

where AA is the amplitude, tt is time, and ϕ0\phi_0 is the initial phase. The argument ωt+ϕ0\omega t+\phi_0 describes the position within the oscillation cycle; it is not necessarily the physical orientation of a rotating object.

Ordinary frequency counts cycles per second, whereas angular frequency measures phase change in radians per second. For example, an oscillation at 50 Hz50\ \mathrm{Hz} has angular frequency

ω=2π(50 s−1)=100π rad s−1≈314.16 rad s−1.\omega=2\pi(50\ \mathrm{s^{-1}}) =100\pi\ \mathrm{rad\,s^{-1}} \approx314.16\ \mathrm{rad\,s^{-1}}.

In the International System of Units, the radian is a dimensionless derived unit, so angular frequency has the dimension of inverse time. Nevertheless, writing rad s−1\mathrm{rad\,s^{-1}}, rather than simply s−1\mathrm{s^{-1}}, makes the angular meaning explicit. The hertz is used for ordinary frequency, not as an interchangeable label for angular frequency: 1 Hz1\ \mathrm{Hz} corresponds to 2π rad s−12\pi\ \mathrm{rad\,s^{-1}}.

Relation to circular motion

Angular frequency can be visualized using a point moving uniformly around a circle. If the point’s angular coordinate is

θ(t)=ωt+θ0,\theta(t)=\omega t+\theta_0,

its projection onto a diameter follows sinusoidal motion:

x(t)=Acos⁡(ωt+θ0).x(t)=A\cos(\omega t+\theta_0).

This geometric relationship connects uniform circular motion to simple harmonic motion.

Angular frequency and angular velocity are related but distinct concepts. Angular velocity describes the rotation of a physical object or direction and, in three dimensions, is an axial vector. Angular frequency describes the temporal progression of an oscillatory phase and is generally treated as a scalar. For uniform circular motion, the nonnegative angular frequency equals the magnitude of the angular velocity. A vibrating spring or an alternating voltage can have an angular frequency without any material object completing a rotation.

Instantaneous angular frequency

For a signal written as

x(t)=A(t)cos⁡ϕ(t),x(t)=A(t)\cos\phi(t),

the instantaneous angular frequency is defined, when a differentiable phase has been specified, by

ω(t)=dϕ(t)dt.\omega(t)=\frac{d\phi(t)}{dt}.

The corresponding instantaneous ordinary frequency is

f(t)=12πdϕ(t)dt.f(t)=\frac{1}{2\pi}\frac{d\phi(t)}{dt}.

A constant ω\omega gives a phase that increases linearly with time. A varying ω(t)\omega(t) describes a changing oscillation rate, as in a swept-frequency signal or chirp. Conversely, phase is obtained by integration:

ϕ(t)=ϕ(t0)+∫t0tω(t′) dt′.\phi(t)=\phi(t_0)+\int_{t_0}^{t}\omega(t')\,dt'.

An arbitrary real-valued signal does not have a unique amplitude–phase decomposition without additional assumptions. In signal processing, a complex analytic representation is often used to define instantaneous phase. For signals containing several distinct oscillatory components, a single instantaneous frequency may not describe their behavior usefully.

Harmonic oscillators and resonance

In classical mechanics, an ideal mass–spring oscillator obeys

md2xdt2+kx=0,m\frac{d^2x}{dt^2}+kx=0,

where mm is the mass and kk is the spring constant. Its natural angular frequency is

ω0=km.\omega_0=\sqrt{\frac{k}{m}}.

This follows from the identity

d2dt2cos⁡(ωt+ϕ0)=−ω2cos⁡(ωt+ϕ0).\frac{d^2}{dt^2}\cos(\omega t+\phi_0) =-\omega^2\cos(\omega t+\phi_0).

Angular frequency therefore appears directly in the differential equation, without the extra factors of 2π2\pi required when using ordinary frequency.

For a linearly damped oscillator driven by a sinusoidal force,

mx¨+bx˙+kx=F0cos⁡(ωt),m\ddot{x}+b\dot{x}+kx=F_0\cos(\omega t),

three frequencies must be distinguished:

  • Undamped natural angular frequency: ω0=k/m\omega_0=\sqrt{k/m}.

  • Damped free-oscillation angular frequency: for an underdamped system,

    ωd=ω02−(b2m)2.\omega_d=\sqrt{\omega_0^2-\left(\frac{b}{2m}\right)^2}.
  • Driving angular frequency: the externally imposed value ω\omega.

Resonance occurs when the response to periodic forcing is enhanced. Its precise frequency depends on damping and on the measured response. For the displacement amplitude in this model, the maximum occurs at

ωr=ω02−b22m2,\omega_r=\sqrt{\omega_0^2-\frac{b^2}{2m^2}},

provided b2<2mkb^2<2mk. Thus natural frequency, damped oscillation frequency, and resonance frequency are not generally identical.

Waves and dispersion

A one-dimensional sinusoidal traveling wave can be written as

y(x,t)=Acos⁡(kx−ωt+ϕ0),y(x,t)=A\cos(kx-\omega t+\phi_0),

where k=2π/λk=2\pi/\lambda is the angular wavenumber and λ\lambda is the wavelength. Angular frequency describes phase variation in time, while angular wavenumber describes phase variation in space.

For this wave, the phase velocity is

vp=ωk.v_p=\frac{\omega}{k}.

A relation ω=ω(k)\omega=\omega(k) is called a dispersion relation. In a dispersive medium, different frequency components can have different phase velocities. The group velocity of a narrowband wave packet is

vg=dωdk,v_g=\frac{d\omega}{dk},

which need not equal ω/k\omega/k.

For electromagnetic radiation in vacuum,

ω=ck,\omega=ck,

where cc is the speed of light. In materials, the relationship depends on the medium’s properties and their frequency dependence, giving rise to optical dispersion.

Electrical circuits

Angular frequency is central to the analysis of alternating current. A sinusoidal voltage may be represented as

V(t)=V0cos⁡(ωt+ϕ).V(t)=V_0\cos(\omega t+\phi).

With the complex-exponential convention eiωte^{i\omega t}, differentiation corresponds to multiplication by iωi\omega. This converts linear differential equations for sinusoidal steady-state circuits into algebraic equations.

The electrical impedances of ideal inductors and capacitors are

ZL=iωL,ZC=1iωC,Z_L=i\omega L, \qquad Z_C=\frac{1}{i\omega C},

where LL is inductance and CC is capacitance. Their impedance magnitudes therefore change in opposite ways with increasing frequency.

An ideal LC circuit has natural angular frequency

ω0=1LC.\omega_0=\frac{1}{\sqrt{LC}}.

Resistance introduces damping, while the particular circuit configuration determines the measured resonance and bandwidth.

Fourier analysis and signed frequencies

The Fourier transform represents a signal in terms of complex exponential components. One common convention is

X(ω)=∫−∞∞x(t)e−iωt dt,X(\omega)=\int_{-\infty}^{\infty}x(t)e^{-i\omega t}\,dt,

with inverse

x(t)=12π∫−∞∞X(ω)eiωt dω.x(t)=\frac{1}{2\pi} \int_{-\infty}^{\infty}X(\omega)e^{i\omega t}\,d\omega.

An alternative convention uses ordinary frequency ff, placing 2π2\pi inside the exponential instead. Transform normalization and spectral-density units must be kept consistent when converting between these conventions.

Although the frequency of a simple real oscillation is normally reported as nonnegative, Fourier analysis uses both positive and negative angular frequencies:

cos⁡(ωt)=eiωt+e−iωt2.\cos(\omega t)=\frac{e^{i\omega t}+e^{-i\omega t}}{2}.

The signs distinguish opposite directions of phase rotation in the complex plane. Negative frequency does not mean a negative number of physical oscillations per second. For a real-valued signal, the transform obeys the conjugate-symmetry relation X(−ω)=X(ω)∗X(-\omega)=X(\omega)^*.

Quantum physics

In quantum mechanics, angular frequency is linked to energy by

E=ℏω,ℏ=h2π,E=\hbar\omega, \qquad \hbar=\frac{h}{2\pi},

where hh is the Planck constant. For a photon, this is equivalent to E=hfE=hf.

An energy eigenstate has a time-dependent phase factor

e−iEt/ℏ.e^{-iEt/\hbar}.

For a superposition of energy eigenstates, relative phases evolve at angular frequencies determined by energy differences. A transition with positive energy separation ΔE\Delta E corresponds to

ω=ΔEℏ.\omega=\frac{\Delta E}{\hbar}.

For the quantum harmonic oscillator, adjacent energy levels are separated by ℏω\hbar\omega. Angular frequency thus connects the classical rate of oscillation with the spacing of quantized energy levels.