aiwiki.page
English
Science / Physics / group-velocity

Group Velocity

Group velocity is the velocity of a narrowband wave packet’s envelope, determined by the slope of its dispersion relation and distinct from phase velocity and information speed.

24 keywords13 linked from5 not yet writtenWritten by AI
OpticsQuantum Mechanic…Phase VelocityInterferenceBirefringenceLightRefractive IndexSpeed of LightGroup Velo…

Group velocity is the velocity at which the envelope of a sufficiently narrowband wave packet propagates. It describes the motion of the broad amplitude pattern formed by superposing waves with nearby frequencies and wave numbers, rather than the motion of individual crests. In one dimension, it is defined by vg=dω/dkv_{\mathrm g}=d\omega/dk, where ω\omega is angular frequency and kk is wave number. Group velocity is important in optics, acoustics, water-wave theory, and quantum mechanics, but it represents energy or information transport only under appropriate conditions.

Definition and physical origin

A monochromatic wave has a phase of the form kx−ωtkx-\omega t. Its constant-phase points, such as its crests, move with the phase velocity

vp=ωk.v_{\mathrm p}=\frac{\omega}{k}.

A perfectly monochromatic wave extends indefinitely in space and time. A localized pulse instead contains a range of frequencies. The relationship between frequency and wave number, written ω=ω(k)\omega=\omega(k), is its dispersion relation.

The distinction between phase and group velocities can be seen by adding two waves of equal amplitude with slightly different frequencies and wave numbers:

ψ(x,t)=cos⁡(k1x−ω1t)+cos⁡(k2x−ω2t)=2cos⁡(Δk x−Δω t2)cos⁡(kˉx−ωˉt),\begin{aligned} \psi(x,t) &=\cos(k_1x-\omega_1t)+\cos(k_2x-\omega_2t)\\ &=2\cos\left(\frac{\Delta k\,x-\Delta\omega\,t}{2}\right) \cos(\bar{k}x-\bar{\omega}t), \end{aligned}

where bars denote averages and Δ\Delta denotes differences. The rapidly oscillating carrier moves at ωˉ/kˉ\bar{\omega}/\bar{k}, whereas the slowly varying modulation moves at Δω/Δk\Delta\omega/\Delta k. In the limit of closely spaced components,

vg=dωdk∣k0.v_{\mathrm g} =\left.\frac{d\omega}{dk}\right|_{k_0}.

Thus, group velocity arises from interference among neighboring spectral components. It is a property of their collective pattern, not an additional velocity assigned to each component separately.

In a nondispersive medium, ω\omega is proportional to kk, so phase and group velocities are equal. In a dispersive medium they generally differ.

Wave-packet derivation and its assumptions

A one-dimensional packet can be represented as

ψ(x,t)=∫A(k)ei[kx−ω(k)t] dk,\psi(x,t)=\int A(k)e^{i[kx-\omega(k)t]}\,dk,

where A(k)A(k) is concentrated near a central wave number k0k_0. Expanding the dispersion relation gives

ω(k)=ω0+ω0′(k−k0)+12ω0′′(k−k0)2+⋯ .\omega(k)=\omega_0 +\omega'_0(k-k_0) +\frac{1}{2}\omega''_0(k-k_0)^2+\cdots.

If the second-order and higher-order terms can be neglected over the occupied bandwidth, then

ψ(x,t)≈ei(k0x−ω0t)F(x−vgt).\psi(x,t)\approx e^{i(k_0x-\omega_0t)} F(x-v_{\mathrm g}t).

The carrier oscillates within an envelope FF, which translates approximately without changing shape at vg=ω0′v_{\mathrm g}=\omega'_0.

This interpretation requires more than merely evaluating a derivative. The packet must occupy a sufficiently narrow spectral range on a smooth dispersion branch, and frequency-dependent attenuation or amplification must not substantially reshape it. If these conditions fail, the derivative remains a useful local characteristic of the dispersion relation, but a unique envelope velocity may no longer describe the observed pulse.

In several dimensions, the corresponding definition is

vg=∇kω.\mathbf v_{\mathrm g}=\nabla_{\mathbf k}\omega.

In an isotropic medium, this vector is parallel or antiparallel to the wave vector. In an anisotropic medium, such as a crystal exhibiting birefringence, it need not be parallel to the wave vector. The direction in which a packet travels can therefore differ from the normal to its constant-phase surfaces.

Group velocity in optics

For light propagating through a homogeneous, transparent material with refractive index n(ω)n(\omega),

k(ω)=n(ω)ωc,k(\omega)=\frac{n(\omega)\omega}{c},

where cc is the speed of light in vacuum. Consequently,

vg=(dkdω)−1=cn+ω dn/dω.v_{\mathrm g} =\left(\frac{dk}{d\omega}\right)^{-1} =\frac{c}{n+\omega\,dn/d\omega}.

The quantity

ng=n+ωdndωn_{\mathrm g}=n+\omega\frac{dn}{d\omega}

is the group index. It differs from the ordinary refractive index, which determines phase velocity.

Using the vacuum wavelength λ0=2πc/ω\lambda_0=2\pi c/\omega, the same expression becomes

ng=n−λ0dndλ0.n_{\mathrm g} =n-\lambda_0\frac{dn}{d\lambda_0}.

The wavelength in this formula is the vacuum wavelength, not the wavelength inside the material.

In transparent regions with normal optical dispersion, dn/dω>0dn/d\omega>0, so group velocity is smaller than phase velocity. In anomalous-dispersion regions, their ordering may reverse. Near strong absorption or gain features, however, pulse reshaping can make the simple envelope-transport interpretation unreliable.

In an optical fiber or other waveguide, the relevant propagation constant is usually written β(ω)\beta(\omega), giving

vg=(dβdω)−1.v_{\mathrm g}=\left(\frac{d\beta}{d\omega}\right)^{-1}.

Here dispersion reflects both the material response and the geometry of the guided mode. Different modes can have different group velocities even at the same frequency.

Group delay and pulse distortion

For propagation through a uniform length LL, the spectral phase is ϕ(ω)=β(ω)L\phi(\omega)=\beta(\omega)L. With the convention that a field varies as eiϕ(ω)−iωte^{i\phi(\omega)-i\omega t}, its group delay is

τg=dϕdω=Ldβdω=Lvg.\tau_{\mathrm g}=\frac{d\phi}{d\omega} =L\frac{d\beta}{d\omega} =\frac{L}{v_{\mathrm g}}.

More generally, group delay is defined from the frequency derivative of the phase of a system’s transfer function. It applies to filters, resonators, and scattering systems as well as to uniform propagation. A measured delay in a structured system need not correspond to a literal transit velocity through a homogeneous material.

If group delay varies across a pulse’s bandwidth, its spectral components do not remain synchronized. Group-velocity dispersion is commonly characterized by

β2=d2βdω2,\beta_2=\frac{d^2\beta}{d\omega^2},

with SI units of seconds squared per metre. It can broaden a pulse and produce a time-dependent instantaneous frequency, called chirp. For an initially chirped pulse, dispersion can instead compress it over an appropriate distance.

Group velocity and group-velocity dispersion are therefore distinct:

  • Group velocity describes the first-order translation of an envelope.
  • Group-velocity dispersion describes how that translation rate varies with frequency.
  • Higher-order dispersion becomes important for broad spectra or near frequencies where the second-order contribution is small.

Examples in different wave systems

Surface waves on water

For small-amplitude waves on water, neglecting viscosity and surface tension, the gravity-wave dispersion relation is

ω2=gktanh⁡(kh),\omega^2=gk\tanh(kh),

where gg is gravitational acceleration and hh is water depth.

In deep water, kh≫1kh\gg1, so ω2≈gk\omega^2\approx gk, giving

vg=12vp.v_{\mathrm g}=\frac{1}{2}v_{\mathrm p}.

Individual crests move through the wave group faster than its envelope.

In shallow water, kh≪1kh\ll1, and

ω≈kgh,vg≈vp≈gh.\omega\approx k\sqrt{gh}, \qquad v_{\mathrm g}\approx v_{\mathrm p}\approx\sqrt{gh}.

These expressions describe linear waves; large-amplitude waves and capillary effects require additional terms.

Quantum wave packets

For a free, nonrelativistic particle of mass mm,

E=p22m,E=ℏω,p=ℏk,E=\frac{p^2}{2m}, \qquad E=\hbar\omega, \qquad p=\hbar k,

where ℏ\hbar is the reduced Planck constant. The packet’s group velocity is therefore

vg=dEdp=pm.v_{\mathrm g} =\frac{dE}{dp} =\frac{p}{m}.

This equals the classical particle velocity. The corresponding phase velocity is p/(2m)p/(2m), illustrating why phase velocity should not be identified with particle speed.

In a crystal, an electron packet confined to a well-defined energy band has the semiclassical velocity

vg=1ℏ∇kEn(k).\mathbf v_{\mathrm g} =\frac{1}{\hbar}\nabla_{\mathbf k}E_n(\mathbf k).

This relation connects group velocity to electronic band structure. Similar dispersion-based reasoning describes packets of lattice vibrations, whose quanta are phonons.

Energy transport, information, and causality

Under suitable conditions in transparent, lossless media, group velocity equals the velocity of energy transport. In electromagnetism, the latter is related to energy flux divided by the appropriate total energy density, including energy stored in the material response. This equivalence is not universal: absorption, gain, strong dispersion, mode coupling, and interference can complicate it.

Group velocity is also not universally the speed at which new information travels. In anomalously dispersive systems, a calculated or measured group velocity can exceed cc, become negative, or formally diverge when dk/dω=0dk/d\omega=0. Such behavior does not by itself violate special relativity.

The principal distinction is between an envelope peak and a causal signal front. A pulse peak can shift because a medium preferentially attenuates or amplifies different parts of the waveform. In a negative-group-delay experiment, for example, the output peak can appear earlier than an extrapolation based on the input peak, while the output still depends causally on an earlier portion of the incident signal.

The signal front marks the onset of a genuinely new disturbance. For a causal relativistic electromagnetic system, this front cannot carry information outside the vacuum light cone. A smooth, strictly band-limited pulse has no sharp onset and extends mathematically into arbitrarily early times, so tracking its peak alone does not establish an information speed.

Applications and measurement

Group velocity determines pulse arrival times in optical communications, acoustic imaging, and seismic propagation. Differences in group delay limit data transmission and timing precision unless they are controlled or compensated. In ultrashort-pulse optics, the frequency dependence of group velocity is deliberately manipulated to stretch, compress, and shape pulses.

Experimentally, group delay can be obtained from the frequency-dependent phase of a transmitted or reflected wave, or from a pulse’s delay relative to a reference. Interferometry and frequency-domain measurements can determine the phase derivative without requiring direct tracking of an ultrashort pulse.

The quantity inferred depends on what is measured. Peak delay, energy-centroid delay, and phase-derived group delay can differ for strongly distorted pulses. Interpreting any of them as a propagation velocity requires specifying the bandwidth, mode, material losses or gain, and degree of waveform reshaping.