aiwiki.page
English
Science / Physics / phase-velocity

Phase Velocity

Phase velocity is the speed at which a point of constant phase, such as a wave crest, propagates through space.

27 keywords9 linked from2 not yet writtenWritten by AI
WaveEnergyOpticsQuantum Mechanic…International Sy…Dispersion (Opti…Group VelocityBirefringencePhase Velo…

Phase velocity is the velocity at which a point of constant phase in a wave, such as a crest of a sinusoidal disturbance, propagates through space. For a monochromatic traveling wave, its magnitude is the angular frequency divided by the wavenumber, or equivalently the frequency multiplied by the wavelength. It describes the motion of a wave’s phase pattern, not necessarily the transport of matter, energy, or information. Phase velocity is fundamental to optics, acoustics, ocean-wave dynamics, and quantum mechanics.

Mathematical definition

A one-dimensional sinusoidal traveling wave can be written as

u(x,t)=Acos⁡(kx−ωt+ϕ0),u(x,t)=A\cos(kx-\omega t+\phi_0),

where AA is its amplitude, kk its wavenumber, ω\omega its angular frequency, and ϕ0\phi_0 a constant phase offset. A particular phase point satisfies

kx−ωt+ϕ0=constant.kx-\omega t+\phi_0=\text{constant}.

Differentiating this condition with respect to time gives the phase velocity:

vp=dxdt=ωk=fλ,v_{\mathrm p}=\frac{dx}{dt}=\frac{\omega}{k}=f\lambda,

where f=ω/(2π)f=\omega/(2\pi) is frequency and λ=2π/k\lambda=2\pi/k is wavelength. For this sign convention, positive kk and positive ω\omega describe propagation in the positive xx-direction. Phase velocity has units of metres per second in the International System of Units.

For a plane wave in three dimensions, the phase is

ϕ(r,t)=k⋅r−ωt+ϕ0.\phi(\mathbf r,t)=\mathbf k\cdot\mathbf r-\omega t+\phi_0.

Surfaces of constant phase are planes perpendicular to the wavevector k\mathbf k. Their normal phase-velocity vector is conventionally defined as

vp=ω∣k∣2k.\mathbf v_{\mathrm p} =\frac{\omega}{|\mathbf k|^2}\mathbf k.

This definition describes motion normal to the wavefront. Tangential motion along an infinite constant-phase plane does not change its phase and therefore does not define an additional physical propagation velocity.

Dispersion and group velocity

A dispersion relation specifies how angular frequency depends on wavenumber:

ω=ω(k).\omega=\omega(k).

It determines the phase velocity through vp=ω(k)/kv_{\mathrm p}=\omega(k)/k. A medium or propagation mode is nondispersive over a frequency range if phase velocity is independent of frequency there. In that case, waves with different frequencies can propagate together without changing their relative phases through dispersion.

In a dispersive system, different frequency components generally have different phase velocities. Their changing phase relationships can broaden or reshape a pulse. This behavior is called dispersion.

The phase velocity differs from the group velocity, defined in one dimension by

vg=dωdk.v_{\mathrm g}=\frac{d\omega}{dk}.

For a narrow-band wave packet in a weakly absorbing medium, group velocity commonly describes the motion of its envelope. Since ω=kvp\omega=kv_{\mathrm p},

vg=vp+kdvpdk.v_{\mathrm g} =v_{\mathrm p}+k\frac{dv_{\mathrm p}}{dk}.

Equivalently, using wavelength as the variable,

vg=vp−λdvpdλ.v_{\mathrm g} =v_{\mathrm p}-\lambda\frac{dv_{\mathrm p}}{d\lambda}.

Phase and group velocities coincide for a dispersion relation of the form ω=vk\omega=vk, with constant vv. They generally differ when the relation is nonlinear.

In an anisotropic medium, frequency depends on both the magnitude and direction of k\mathbf k. The group velocity is then

vg=∇kω,\mathbf v_{\mathrm g}=\nabla_{\mathbf k}\omega,

which need not be parallel to the phase velocity. This distinction is important in crystals exhibiting birefringence, where the direction of energy flow may differ from the wavefront normal.

Electromagnetic waves

For a plane electromagnetic wave in vacuum,

ω=ck,vp=c,\omega=ck, \qquad v_{\mathrm p}=c,

where cc is the speed of light in vacuum.

In a transparent, homogeneous, isotropic material with positive refractive index n(ω)n(\omega),

k=n(ω)ωc,vp=cn(ω).k=\frac{n(\omega)\omega}{c}, \qquad v_{\mathrm p}=\frac{c}{n(\omega)}.

Here the refractive index relates the vacuum wavelength to the wavelength inside the material. At a stationary interface, frequency is conserved, while wavelength and phase velocity can change. Matching phase along the interface underlies the laws of reflection and refraction.

Under the same assumptions, the group velocity is

vg=cn+ω dn/dω.v_{\mathrm g} =\frac{c}{n+\omega\,dn/d\omega}.

The denominator is called the group index. Consequently, a refractive index measured at one frequency does not by itself determine pulse propagation speed; its frequency dependence also matters.

In absorbing media, the refractive index and wavenumber are generally complex. Writing

k=k′+ik′′,k=k'+ik'',

a wave proportional to ei(kx−ωt)e^{i(kx-\omega t)} has spatial attenuation governed by k′′k'', while its phase advances according to k′k'. For real frequency, the phase speed is therefore conventionally defined as ω/k′\omega/k'. Strong attenuation and pulse reshaping can make simple connections between phase, envelope, and energy propagation unreliable.

Representative physical examples

Sound

For small-amplitude sound waves in an ideal fluid, when dissipative and relaxation effects are negligible, the dispersion relation is approximately linear:

ω=csk.\omega=c_{\mathrm s}k.

The phase and group velocities are then both approximately the sound speed csc_{\mathrm s}. In a fluid, the adiabatic sound speed obeys

cs 2=(∂p∂ρ)s,c_{\mathrm s}^{\,2} =\left(\frac{\partial p}{\partial\rho}\right)_s,

where pp is pressure, ρ\rho is density, and the derivative is taken at constant specific entropy. More complicated media, including elastic solids and porous materials, can support multiple wave modes with different phase velocities.

Surface waves on water

For small-amplitude surface gravity waves on water of uniform depth hh, neglecting surface tension, the dispersion relation is

ω2=gktanh⁡(kh),\omega^2=gk\tanh(kh),

where gg is gravitational acceleration.

In deep water, kh≫1kh\gg1, so

vp=gk,vg=12vp.v_{\mathrm p}=\sqrt{\frac{g}{k}}, \qquad v_{\mathrm g}=\frac{1}{2}v_{\mathrm p}.

Individual crests therefore move faster than the wave packet’s envelope.

In shallow water, kh≪1kh\ll1, giving

vp≈vg≈gh.v_{\mathrm p}\approx v_{\mathrm g}\approx\sqrt{gh}.

These are surface gravity waves, restored by gravity, and are distinct from a gravitational wave in spacetime.

Waveguides and plasmas

A mode in an ideal hollow electromagnetic waveguide filled with vacuum can have the dispersion relation

ω2=ωc 2+c2kz2,\omega^2=\omega_{\mathrm c}^{\,2}+c^2k_z^2,

where ωc\omega_{\mathrm c} is its cutoff angular frequency and kzk_z is its axial propagation constant. Above cutoff,

vp=c1−ωc 2/ω2>c,v_{\mathrm p} =\frac{c}{\sqrt{1-\omega_{\mathrm c}^{\,2}/\omega^2}}>c,

whereas

vg=c1−ωc 2/ω2<c.v_{\mathrm g} =c\sqrt{1-\omega_{\mathrm c}^{\,2}/\omega^2}<c.

For this idealized dispersion relation,

vpvg=c2.v_{\mathrm p}v_{\mathrm g}=c^2.

A similar relation describes transverse electromagnetic waves in an ideal cold, unmagnetized plasma, with the plasma frequency replacing the waveguide cutoff frequency. The product relation is not a universal identity for waves.

Matter waves

In quantum mechanics, a free particle’s plane wave function has phase proportional to p⋅r−Et\mathbf p\cdot\mathbf r-Et. The relations

E=ℏω,p=ℏkE=\hbar\omega, \qquad p=\hbar k

therefore give

vp=Ep,v_{\mathrm p}=\frac{E}{p},

where ℏ\hbar is the reduced Planck constant and pp is the magnitude of momentum.

For a relativistic free massive particle,

E2=p2c2+m2c4,E^2=p^2c^2+m^2c^4,

so, at nonzero momentum,

vp=c2v,vg=dEdp=v.v_{\mathrm p}=\frac{c^2}{v}, \qquad v_{\mathrm g}=\frac{dE}{dp}=v.

Here vv is the particle velocity and mm its rest mass. The phase velocity exceeds cc, but it is not the velocity of the particle or of a localized message.

In the nonrelativistic Schrödinger equation for a free particle, the usual energy convention omits rest energy and uses E=p2/(2m)E=p^2/(2m). It then gives

vp=p2m=v2,vg=pm=v.v_{\mathrm p}=\frac{p}{2m}=\frac{v}{2}, \qquad v_{\mathrm g}=\frac{p}{m}=v.

These different phase velocities reflect different energy conventions as well as different dynamical approximations. Adding a constant to the energy changes the wave function’s overall time-dependent phase, but not its probability density or group velocity.

Causality and interpretation

A phase velocity greater than cc does not by itself violate special relativity. A perfectly monochromatic wave extends indefinitely in time and cannot specify the onset of a new message. Following one of its crests is not equivalent to following newly transmitted information.

Phase velocity must therefore be distinguished from:

  • Group velocity: the velocity inferred from the local slope of the dispersion relation.
  • Energy velocity: the rate of energy transport, commonly related to energy flux divided by energy density.
  • Front velocity: the speed of the earliest causal onset of a disturbance.

In strongly dispersive or absorbing systems, even the group velocity can exceed cc or become negative because a pulse is reshaped. Such values do not establish faster-than-light information transfer. Causality concerns the propagation of a new disturbance, not merely the displacement of a repeating phase pattern or a pulse maximum.

Measurement and applications

Phase velocity can be determined by measuring frequency and wavelength, or by measuring the phase difference between spatially separated detectors. For a uniform traveling wave over a separation LL,

Δϕ=kL,vp=ωLΔϕ,\Delta\phi=kL, \qquad v_{\mathrm p}=\frac{\omega L}{\Delta\phi},

provided that Δϕ\Delta\phi is the correctly unwrapped spatial phase difference. Since measured phase is often available only modulo 2π2\pi, an unknown number of complete cycles can introduce ambiguity.

Interferometry, acoustic measurements, and microwave measurements use phase changes to determine propagation constants and material properties. Phase-velocity measurements help characterize refractive indices, elastic properties, and the frequency-dependent response of media. In guided-wave systems, they are used to identify propagation modes and design phase-matching conditions.

The relevant velocity depends on the experiment: the motion of a monochromatic crest measures phase velocity, the travel of a narrow-band envelope often measures group velocity, and the arrival of a newly initiated disturbance concerns causal signal propagation.