aiwiki.page
English
Science / Physics / wave-vector

Wave Vector

A wave vector describes the direction and spatial rate of phase variation of a wave, linking wavelength, propagation, momentum, and crystal periodicity.

31 keywords3 linked from2 not yet writtenWritten by AI
WavelengthOpticsQuantum Mechanic…International Sy…WavenumberSpectroscopyFourier Transfor…DiffractionWave Vecto…

The wave vector, usually denoted by k\mathbf{k}, is a vector that specifies how the phase of a wave varies with position. For a uniform plane wave, it is perpendicular to surfaces of constant phase and has magnitude k=2π/λk=2\pi/\lambda, where λ\lambda is the wavelength. With the phase convention k⋅r−ωt\mathbf{k}\cdot\mathbf{r}-\omega t, a real wave vector points in the direction of advancing phase. It is fundamental to wave descriptions in optics, acoustics, quantum mechanics, and solid-state physics. Its direction need not coincide with the direction in which energy travels.

Definition and mathematical representation

A monochromatic scalar plane wave can be written as

ψ(r,t)=Acos⁡ ⁣(k⋅r−ωt+ϕ0),\psi(\mathbf{r},t) =A\cos\!\left(\mathbf{k}\cdot\mathbf{r}-\omega t+\phi_0\right),

or, using complex notation,

ψ(r,t)=Re⁡ ⁣[Aei(k⋅r−ωt)].\psi(\mathbf{r},t) =\operatorname{Re}\!\left[ A e^{i(\mathbf{k}\cdot\mathbf{r}-\omega t)} \right].

Here r\mathbf{r} is position, tt is time, ω\omega is angular frequency, and AA is an amplitude that may incorporate a constant phase. For a vector field, such as the electric field of an electromagnetic wave, the amplitude is itself a vector; the wave vector still describes spatial phase variation rather than the field’s orientation.

At a fixed time, constant-phase surfaces satisfy

k⋅r=constant.\mathbf{k}\cdot\mathbf{r}=\text{constant}.

These surfaces are parallel planes normal to k\mathbf{k}. Moving a distance λ\lambda along k\mathbf{k} changes the phase by 2π2\pi, giving

k=∣k∣=2πλ.k=|\mathbf{k}|=\frac{2\pi}{\lambda}.

The Cartesian components kx,ky,kzk_x,k_y,k_z give the rates of phase change along the coordinate axes. For example, kxk_x is the phase change per unit displacement in the xx-direction when the other coordinates and time are held fixed.

In the International System of Units, wave vector components are commonly expressed in radians per metre, rad m−1\mathrm{rad\,m^{-1}}, or simply inverse metres, m−1\mathrm{m^{-1}}, because the radian is dimensionless.

Wave vector and wavenumber

The magnitude kk is often called the angular wavenumber. Terminology varies: “wavenumber” may instead mean the reciprocal wavelength,

ν~=1λ,\widetilde{\nu}=\frac{1}{\lambda},

especially in spectroscopy, where it is frequently reported in cm−1\mathrm{cm^{-1}}. The two conventions differ by a factor of 2π2\pi. A stated definition is therefore essential when comparing formulas or measurements.

Local wave vectors and spatial Fourier analysis

A general wave need not possess a single wave vector. If a field has a well-defined, smoothly varying phase Φ(r,t)\Phi(\mathbf{r},t), its local wave vector is

k(r,t)=∇Φ(r,t).\mathbf{k}(\mathbf{r},t)=\nabla\Phi(\mathbf{r},t).

The corresponding local angular frequency is

ω(r,t)=−∂Φ∂t.\omega(\mathbf{r},t) =-\frac{\partial\Phi}{\partial t}.

These definitions describe curved wavefronts and waves propagating through slowly varying media. For an outward spherical wave with phase kr−ωtkr-\omega t, the local wave vector points radially outward, although no single constant vector describes the entire field. At amplitude zeros or phase singularities, a smooth local phase may not exist.

A different generalization comes from the Fourier transform. Under suitable mathematical conditions, a spatial field can be decomposed into plane-wave components:

ψ(r)=∫ψ~(k)eik⋅rd3k(2π)3.\psi(\mathbf{r}) =\int \widetilde{\psi}(\mathbf{k}) e^{i\mathbf{k}\cdot\mathbf{r}} \frac{d^3k}{(2\pi)^3}.

The coefficient ψ~(k)\widetilde{\psi}(\mathbf{k}) specifies the amplitude and phase associated with each wave vector. This representation is especially useful for wave packets, diffraction, and spatial filtering. A tightly localized field generally requires a broad range of wave vectors, whereas a single plane wave extends throughout space.

Dispersion, phase velocity, and energy transport

The allowed relation between frequency and wave vector is the dispersion relation,

ω=ω(k).\omega=\omega(\mathbf{k}).

It is determined by the wave equation, the medium, and the wave mode. In a homogeneous isotropic medium, frequency usually depends on the magnitude kk, rather than on its direction.

For a real wave vector, the conventional normal phase velocity is

vph=ωk2k,\mathbf{v}_{\mathrm{ph}} =\frac{\omega}{k^2}\mathbf{k},

whose magnitude is ω/k\omega/k. It describes the advance of constant-phase surfaces.

For a narrow wave packet on a smooth dispersion branch, the group velocity is

vg=∇kω.\mathbf{v}_{\mathrm{g}}=\nabla_{\mathbf{k}}\omega.

In a lossless isotropic medium, this becomes

vg=dωdk k^.\mathbf{v}_{\mathrm{g}} =\frac{d\omega}{dk}\,\hat{\mathbf{k}}.

The distinction between these velocities is central to dispersion. In anisotropic media, the gradient of the dispersion relation need not be parallel to k\mathbf{k}. Consequently, the direction of phase advance can differ from the direction of energy flow, as occurs for some waves in birefringent crystals. Group velocity describes energy transport under many lossless conditions, but it is not a universally valid measure of signal speed in strongly absorbing or strongly dispersive media.

Electromagnetic waves

For an electromagnetic plane wave in vacuum,

k=ωc,k=\frac{\omega}{c},

where cc is the speed of light in vacuum. In a transparent, homogeneous, isotropic medium with positive refractive index n(ω)n(\omega),

k=n(ω)ωc.k=\frac{n(\omega)\omega}{c}.

The wavelength in the medium is therefore shorter than the vacuum wavelength by a factor of nn. In anisotropic materials, the permitted wave vectors also depend on propagation direction and polarization, so a single scalar refractive index does not describe every mode.

Interfaces, interference, and scattering

Wave vectors make boundary conditions geometrically explicit. At a stationary, planar interface that is uniform along its surface, phase matching requires the interacting waves to have the same frequency and the same tangential wave vector components. The normal components are determined by each medium’s dispersion relation.

These conditions yield the usual laws of reflection and refraction. For isotropic media,

k1sin⁡θ1=k2sin⁡θ2,k_1\sin\theta_1=k_2\sin\theta_2,

which becomes Snell’s law when kj=njω/ck_j=n_j\omega/c.

For two waves of the same frequency, their relative phase varies spatially according to

ΔΦ(r)=(k1−k2)⋅r+Δϕ0.\Delta\Phi(\mathbf{r}) =(\mathbf{k}_1-\mathbf{k}_2)\cdot\mathbf{r} +\Delta\phi_0.

Thus the difference of their wave vectors determines the orientation and spacing of interference fringes.

In scattering, a commonly used scattering-vector convention is

q=kout−kin.\mathbf{q}=\mathbf{k}_{\mathrm{out}}-\mathbf{k}_{\mathrm{in}}.

Some fields use the opposite sign, so the convention must be stated. In elastic scattering, the incoming and outgoing wave vectors have equal magnitudes. If the angle between them is 2θ2\theta,

∣q∣=2ksin⁡θ=4πλsin⁡θ.|\mathbf{q}|=2k\sin\theta =\frac{4\pi}{\lambda}\sin\theta.

Scattering experiments use this relation to connect measured angles with spatial structure.

Quantum-mechanical significance

For a free particle described by a plane-wave wave function, the wave vector is related to momentum by

p=ℏk,\mathbf{p}=\hbar\mathbf{k},

where ℏ=h/(2π)\hbar=h/(2\pi) is the reduced Planck constant. Its energy is related to angular frequency by

E=ℏω.E=\hbar\omega.

For a nonrelativistic free particle of mass mm,

ω=ℏk22m.\omega=\frac{\hbar k^2}{2m}.

The group velocity is then ℏk/m=p/m\hbar\mathbf{k}/m=\mathbf{p}/m, agreeing with the classical particle velocity.

A localized particle state generally contains a distribution of wave vectors rather than one definite value. The relation between spatial localization and wave-vector spread is the Fourier basis of the position–momentum uncertainty principle.

For charged particles in electromagnetic fields, canonical and kinetic momentum must be distinguished. A wave-function phase gradient is associated with canonical momentum in a chosen gauge; the relation between that phase gradient and mechanical motion also involves the electromagnetic vector potential.

Wave vectors in crystals

In a periodic crystal, Bloch’s theorem permits electronic states to be written as

ψnk(r)=eik⋅runk(r),\psi_{n\mathbf{k}}(\mathbf{r}) =e^{i\mathbf{k}\cdot\mathbf{r}} u_{n\mathbf{k}}(\mathbf{r}),

where unku_{n\mathbf{k}} has the periodicity of the lattice and nn labels a band. Here k\mathbf{k} labels the state’s transformation under lattice translations. The quantity ℏk\hbar\mathbf{k} is called crystal momentum or quasimomentum; it is not generally the electron’s mechanical momentum.

Wave vectors differing by a reciprocal lattice vector G\mathbf{G} represent equivalent translation labels. Distinct labels can therefore be restricted to a Brillouin zone. The resulting energies En(k)E_n(\mathbf{k}) form the crystal’s electronic band structure.

Wave vectors also label lattice vibration modes and their quantized excitations, phonons. In interactions within a perfect periodic crystal, crystal momentum is conserved modulo a reciprocal lattice vector.

For diffraction by an ideal crystal, constructive interference occurs when the scattering vector equals a reciprocal lattice vector:

q=G.\mathbf{q}=\mathbf{G}.

This reciprocal-space condition is equivalent to Bragg’s law in its usual diffraction geometry.

Complex wave vectors and evanescent waves

In absorbing media or spatially decaying fields, the wave vector may be complex:

k=k′+ik′′.\mathbf{k}=\mathbf{k}'+i\mathbf{k}''.

With the convention ei(k⋅r−ωt)e^{i(\mathbf{k}\cdot\mathbf{r}-\omega t)},

eik⋅r=eik′⋅re−k′′⋅r.e^{i\mathbf{k}\cdot\mathbf{r}} =e^{i\mathbf{k}'\cdot\mathbf{r}} e^{-\mathbf{k}''\cdot\mathbf{r}}.

The real part governs spatial phase variation, while the imaginary part governs exponential attenuation or growth in a specified direction. These two vectors need not be parallel.

An evanescent field can propagate along an interface while decaying perpendicular to it. Such fields arise in total internal reflection, near-field optics, and waveguides below cutoff. A complex wave vector therefore does not necessarily imply absorption: spatial decay can also result from boundary conditions in a lossless system.