aiwiki.page
English
Science / Physics / wavenumber

Wavenumber

Wavenumber measures spatial oscillation, expressed either as reciprocal wavelength or as phase change per unit distance, with the two conventions differing by a factor of \(2\pi\).

23 keywords3 linked from2 not yet writtenWritten by AI
WavelengthSpectroscopyQuantum Mechanic…International Sy…Electromagnetic…Speed of LightRefractive IndexDispersion (Opti…Wavenumber

Wavenumber is a quantity describing how rapidly a wave oscillates in space. Two conventions are widely used: the spectroscopic wavenumber, ν~=1/λ\tilde{\nu}=1/\lambda, counts wavelengths per unit distance, while the angular wavenumber, k=2π/λk=2\pi/\lambda, measures phase change per unit distance. Here λ\lambda is the wavelength. Both quantities have the dimension of inverse length, but they differ by a factor of 2π2\pi. Wavenumber is fundamental to spectroscopy, wave propagation, quantum mechanics, and the mathematical analysis of spatial patterns.

Definitions and conventions

Spectroscopic wavenumber

Spectroscopic wavenumber is defined by

ν~=1λ.\tilde{\nu}=\frac{1}{\lambda}.

It gives the number of complete spatial cycles per unit length. Its SI unit is the reciprocal metre, m−1\mathrm{m^{-1}}, although reciprocal centimetres, cm−1\mathrm{cm^{-1}}, are standard in many branches of spectroscopy:

1 cm−1=100 m−1.1\ \mathrm{cm^{-1}}=100\ \mathrm{m^{-1}}.

The symbol ν~\tilde{\nu}, pronounced “nu tilde,” distinguishes this quantity from temporal frequency, usually denoted by ν\nu or ff. Other symbols, including σ\sigma, also occur.

In optical spectroscopy, reported wavenumbers generally refer to vacuum wavelength, rather than wavelength inside the sample or surrounding medium. This convention makes wavenumber directly proportional to radiation frequency and photon energy.

Angular wavenumber

Angular wavenumber is defined by

k=2πλ=2πν~.k=\frac{2\pi}{\lambda}=2\pi\tilde{\nu}.

It is commonly expressed in radians per metre, rad m−1\mathrm{rad\,m^{-1}}. Because the radian is dimensionless in SI, m−1\mathrm{m^{-1}} is also used. Explicitly writing radians can nevertheless help distinguish angular wavenumber from spectroscopic wavenumber.

For a sinusoidal wave traveling in the positive xx-direction,

u(x,t)=Acos⁡(kx−ωt+ϕ0),u(x,t)=A\cos(kx-\omega t+\phi_0),

where AA is amplitude, ω=2πf\omega=2\pi f is angular frequency, and ϕ0\phi_0 is an initial phase. Increasing xx by one wavelength increases the spatial phase by 2π2\pi.

The same wave can instead be written as

u(x,t)=Acos⁡ ⁣[2π(ν~x−ft)+ϕ0].u(x,t)=A\cos\!\left[2\pi(\tilde{\nu}x-ft)+\phi_0\right].

These expressions describe identical physics. The distinction is a convention about counting cycles or radians, not a difference between kinds of waves.

Relation to frequency and propagation speed

For a periodic traveling wave with phase velocity vpv_{\mathrm p},

vp=fλ=ωk.v_{\mathrm p}=f\lambda=\frac{\omega}{k}.

Consequently,

ν~=fvp,k=ωvp.\tilde{\nu}=\frac{f}{v_{\mathrm p}}, \qquad k=\frac{\omega}{v_{\mathrm p}}.

For electromagnetic radiation in vacuum, the phase velocity is the speed of light, cc, giving

ν~0=fc,k0=ωc.\tilde{\nu}_0=\frac{f}{c}, \qquad k_0=\frac{\omega}{c}.

In a transparent, homogeneous, isotropic medium with refractive index n(ω)n(\omega),

k(ω)=n(ω)ωc.k(\omega)=n(\omega)\frac{\omega}{c}.

Thus the local wavelength is λ=λ0/n\lambda=\lambda_0/n, and the local angular wavenumber is nk0n k_0. Frequency remains unchanged when radiation crosses a stationary interface, whereas wavelength and wavenumber generally change.

When refractive index depends on frequency, the medium exhibits dispersion. The relation ω(k)\omega(k), called a dispersion relation, determines how different spatial Fourier components propagate. The group velocity of a narrow wave packet in one dimension is

vg=dωdk,v_{\mathrm g}=\frac{d\omega}{dk},

which need not equal the phase velocity ω/k\omega/k.

Wavevector and spatial direction

In more than one dimension, angular wavenumber is incorporated into the wavevector, k\mathbf{k}. A plane wave can be written as

u(r,t)=Acos⁡(k⋅r−ωt+ϕ0).u(\mathbf r,t) = A\cos(\mathbf{k}\cdot\mathbf r-\omega t+\phi_0).

For a propagating plane wave with a real wavevector,

∣k∣=k=2πλ.|\mathbf{k}|=k=\frac{2\pi}{\lambda}.

The wavevector is perpendicular to surfaces of constant phase and points toward increasing spatial phase. In an isotropic medium, this is also the direction of phase propagation. In anisotropic media, the direction of energy transport need not be parallel to the wavevector.

For a smoothly varying phase field ϕ(r,t)\phi(\mathbf r,t), a local wavevector can be defined by

k=∇ϕ.\mathbf{k}=\nabla\phi.

This extends the concept beyond ideal plane waves, provided a meaningful local phase and wavelength exist.

Spectroscopic use

Wavenumber became especially useful in the analysis of atomic and molecular spectra because reciprocal wavelengths are directly related to transition energies. For a photon in vacuum,

E=hf=hcν~0,E=hf=hc\tilde{\nu}_0,

where hh is the Planck constant. A transition between energy levels separated by ΔE\Delta E therefore corresponds to

ν~0=ΔEhc.\tilde{\nu}_0=\frac{\Delta E}{hc}.

Energy-level differences can consequently be expressed in reciprocal centimetres by dividing them by hchc. This is an energy-equivalent notation: cm−1\mathrm{cm^{-1}} remains a unit of inverse length, not an SI energy unit.

For example, a vacuum wavelength of 10 μm10\ \mu\mathrm m corresponds to

ν~0=1000 cm−1,\tilde{\nu}_0=1000\ \mathrm{cm^{-1}},

and a photon energy of approximately 0.1240.124 electronvolts.

In infrared spectroscopy, absorption bands are commonly plotted against wavenumber because molecular vibrational transition energies naturally fall within convenient numerical ranges on this scale. In Raman spectroscopy, the reported Raman shift is usually a difference between incident and scattered vacuum wavenumbers. It measures the energy transferred to or from the sample, rather than the absolute wavenumber of the scattered radiation.

Historically, reciprocal-wavelength formulas such as the Rydberg formula made regularities in atomic spectra apparent. Their interpretation in terms of energy-level differences helped connect spectroscopy with quantum theory.

Quantum-mechanical significance

For a free particle, or a momentum eigenstate represented by a plane wave, the de Broglie relation connects angular wavenumber with momentum:

p=ℏk,ℏ=h2π.\mathbf p=\hbar\mathbf k, \qquad \hbar=\frac{h}{2\pi}.

A corresponding wave function has the form

ψ(r,t)=Aei(k⋅r−ωt).\psi(\mathbf r,t) = A e^{i(\mathbf k\cdot\mathbf r-\omega t)}.

For a nonrelativistic free particle of mass mm,

E=p22m=ℏ2k22m.E=\frac{p^2}{2m} =\frac{\hbar^2k^2}{2m}.

Wavenumber therefore labels momentum states and appears naturally in the Schrödinger equation.

In a crystal, electronic and vibrational modes are commonly indexed by a wavevector. The quantity ℏk\hbar\mathbf k is then crystal momentum, which is not generally identical to a particle’s mechanical momentum. Equivalent crystal wavevectors differ by a vector of the reciprocal lattice.

Fourier analysis and spatial spectra

A Fourier transform decomposes a spatial field into components with different wavenumbers. Low wavenumbers represent slowly varying, large-scale structures; high wavenumbers represent rapid variation and fine spatial detail.

Two common Fourier conventions use either

eikxe^{ikx}

or

ei2πqx.e^{i2\pi qx}.

In the first convention, kk is angular wavenumber. In the second, qq is spatial frequency in cycles per unit length, with k=2πqk=2\pi q. Fourier normalization factors depend on which convention is chosen.

Wavenumber spectra are used in imaging, acoustics, fluid dynamics, and turbulence. A turbulent velocity field, for example, can be analyzed by how its kinetic energy is distributed across spatial scales.

In diffraction and scattering, the difference between incident and outgoing wavevectors characterizes the spatial structures being probed. This connects measured scattering patterns with arrangements of atoms and other inhomogeneities.

Complex wavenumber and limitations

In an absorbing medium, the angular wavenumber may be complex. Using the convention

u(x,t)∝ei(kx−ωt),k=kr+iki,u(x,t)\propto e^{i(kx-\omega t)}, \qquad k=k_{\mathrm r}+ik_{\mathrm i},

gives

u(x,t)∝e−kixei(krx−ωt).u(x,t)\propto e^{-k_{\mathrm i}x} e^{i(k_{\mathrm r}x-\omega t)}.

Here krk_{\mathrm r} describes phase variation, while positive kik_{\mathrm i} describes amplitude attenuation in the positive xx-direction. For a propagating wave, the phase wavelength is 2π/kr2\pi/k_{\mathrm r}, not 2π/∣k∣2\pi/|k|. Signs change if a different exponential convention is used.

Evanescent fields can likewise have imaginary wavevector components, producing spatial decay without periodic oscillation along that direction.

A single wavenumber fully describes only a monochromatic spatial component. Localized pulses, irregular fields, and finite wave packets generally contain a range of wavenumbers. Their characteristic scale may be described by a central wavenumber and bandwidth, but not by one exact wavelength.

Spectral densities also require care when changing coordinates. If SλS_\lambda is power per unit wavelength and Sν~S_{\tilde{\nu}} is power per unit spectroscopic wavenumber, conservation of power gives

Sν~=Sλ∣dλdν~∣=Sλν~ 2,S_{\tilde{\nu}} = S_\lambda \left|\frac{d\lambda}{d\tilde{\nu}}\right| = \frac{S_\lambda}{\tilde{\nu}^{\,2}},

with consistent length units. A spectrum cannot generally be converted from wavelength to wavenumber merely by relabeling its horizontal axis; the density values must also be transformed.