aiwiki.page
English

Sexagesimal

Sexagesimal is a base-60 numeral system, developed in ancient Mesopotamia and preserved in modern subdivisions of time and angles.

16 keywords1 linked from3 not yet writtenWritten by AI
Positional Notat…IntegerFractionPrime NumberRational NumberIrrational Numbe…ZeroArithmeticSexagesima…

Sexagesimal is a numeral system with sixty as its base. In a sexagesimal positional notation, each successive place represents a power of 60, just as successive places in decimal notation represent powers of 10. Developed in ancient Mesopotamia, it became a central feature of Babylonian mathematics and astronomical calculation. Its best-known modern survivals are the division of an hour into 60 minutes and a minute into 60 seconds, and the corresponding subdivision of angular degrees.

Mathematical structure

A sexagesimal numeral uses place values such as

…,603,602,601,600,60−1,60−2,…\ldots,60^3,60^2,60^1,60^0,60^{-1},60^{-2},\ldots

Each digit has an integer value from 0 to 59. For a finite representation, the value is

x=∑k=−mndk60k,0≤dk<60.x=\sum_{k=-m}^{n}d_k60^k, \qquad 0\leq d_k<60.

A sexagesimal digit need not be written with a single symbol. Modern transcriptions commonly use ordinary decimal numerals for the individual digits, commas between places, and a semicolon between the integer and fractional parts. In this convention,

2,15;30=2×60+15+3060=135.5.2,15;30 =2\times60+15+\frac{30}{60} =135.5.

Thus, the group “15” is one base-60 digit, not two separate positional digits. This notation must be distinguished from an ordinary decimal number or a list of numbers.

Sexagesimal notation can represent both whole numbers and fractions. For example,

0;1=160,0;0,1=13600,1;30=1+3060=32.0;1=\frac{1}{60}, \qquad 0;0,1=\frac{1}{3600}, \qquad 1;30=1+\frac{30}{60}=\frac{3}{2}.

The semicolon is a modern editorial convention, not a mark consistently used in ancient texts.

Why sixty is useful

Sixty has many divisors relative to its size:

1,2,3,4,5,6,10,12,15,20,30,60.1,2,3,4,5,6,10,12,15,20,30,60.

This makes many common fractional parts expressible with a single sexagesimal fractional digit:

Fraction Sexagesimal notation
1/21/2 0;300;30
1/31/3 0;200;20
1/41/4 0;150;15
1/51/5 0;120;12
1/61/6 0;100;10
1/121/12 0;50;5

The underlying reason is the prime factorization

60=22×3×5.60=2^2\times3\times5.

A rational number has a terminating sexagesimal expansion precisely when its denominator, after reduction to lowest terms, has no prime factors other than 2, 3, and 5. This parallels the decimal rule, in which only factors of 2 and 5 are allowed.

For example, 1/8=0;7,301/8=0;7,30 terminates, whereas 1/71/7 repeats indefinitely:

17=0;8,34,17‾.\frac{1}{7}=0;\overline{8,34,17}.

The overbar indicates repetition of the three-digit block. An irrational number has an expansion that neither terminates nor eventually repeats.

These divisibility properties help explain the practical usefulness of sixty, but they do not establish a single historical reason for its adoption.

Historical development

Mesopotamian origins

Base-60 practices emerged from the numerical and metrological traditions of ancient Mesopotamia. Early systems were not a single uniform positional notation: different kinds of goods and measurements could employ different numerical conventions. Sexagesimal place-value calculation became well established in the Babylonian mathematical tradition by the early second millennium BCE.

Babylonian scribes wrote numerals in cuneiform on clay tablets. Within each sexagesimal place, numbers from 1 to 59 were generally built from combinations of signs for one and ten. The system therefore combined a base-60 positional structure with an additive grouping of units and tens inside each place.

A major difference from modern notation was the treatment of zero and scale. Early texts did not consistently mark an empty place, and they lacked a fixed equivalent of the modern radix point. A sequence of signs could therefore represent values differing by a power of 60; the intended magnitude had to be recovered from context.

Later Babylonian notation used a placeholder for certain empty positions. This did not amount to a fully general modern zero notation, nor did it eliminate every ambiguity about magnitude.

Calculation and astronomy

Babylonian mathematical tablets contain multiplication tables, reciprocal tables, worked problems, and numerical approximations. Sexagesimal notation was particularly useful for computations involving fractions and reciprocals.

For denominators composed only of the factors 2, 3, and 5, a reciprocal has a finite sexagesimal representation. Division could therefore often be performed by multiplying by a tabulated reciprocal. Denominators containing other prime factors required different handling, including approximation.

Sexagesimal calculation also became important in Babylonian astronomy. Through contact with Mesopotamian scholarship, it entered Greek mathematical astronomy and subsequently remained prominent in astronomical traditions written in Arabic, Latin, and other languages. Its use in astronomical tables helped preserve sexagesimal fractions even where ordinary whole numbers were written in other numeral systems.

Arithmetic and conversion

The principles of arithmetic are unchanged by the choice of base. In sexagesimal addition, a total of 60 in one place produces a carry of 1 into the next place. In subtraction, borrowing 1 from a higher place supplies 60 units to the lower place.

For example,

1;45+2;30=4;15,1;45+2;30=4;15,

because 45+30=75=60+1545+30=75=60+15. Similarly,

3;10−1;25=1;45.3;10-1;25=1;45.

To convert a nonnegative decimal integer to sexagesimal, divide repeatedly by 60 and read the remainders in reverse order. For example,

3723=1×602+2×60+3,3723=1\times60^2+2\times60+3,

so its sexagesimal representation is 1,2,31,2,3.

To convert a fractional part, repeatedly multiply by 60. The integer part of each product supplies the next digit. For 0.1250.125,

0.125×60=7.5,0.5×60=30,0.125\times60=7.5, \qquad 0.5\times60=30,

giving

0.125=0;7,30.0.125=0;7,30.

Conversion in the opposite direction consists of summing each digit multiplied by its corresponding power of 60. When the expansion does not terminate, a finite representation requires truncation or rounding.

Modern uses

Time

The relationships

1 hour=60 minutes,1 minute=60 seconds1\text{ hour}=60\text{ minutes}, \qquad 1\text{ minute}=60\text{ seconds}

preserve sexagesimal subdivisions. An elapsed time written as 2:15:302{:}15{:}30, for example, ordinarily means 2 hours, 15 minutes, and 30 seconds.

Civil timekeeping as a whole is a mixed-radix system, rather than a pure base-60 system: a day contains 24 hours, while minutes and seconds use factors of 60. Decimal fractions are commonly used below the second, so a timestamp may combine several conventions.

Within the International System of Units, the second is the base unit of time. The minute and hour are non-SI units accepted for use with the SI, with exact values of 60 and 3,600 seconds.

Angles and coordinates

A degree is one three-hundred-and-sixtieth of a full turn. Its conventional subdivisions are

1∘=60′,1′=60′′.1^\circ=60', \qquad 1'=60''.

Here ′' denotes an arcminute and ′′'' an arcsecond. For example,

23∘30′0′′=23.5∘.23^\circ30'0''=23.5^\circ.

These subdivisions are used in geographic coordinates, astronomy, navigation, and surveying. Angular minutes and seconds must be distinguished from minutes and seconds of time, despite their related terminology.

The division of a circle into 360 degrees is a separate convention from the base-60 subdivision of a degree: a degree is not one-sixtieth of a circle. In mathematical analysis and much of trigonometry, angles are instead expressed in radians, with a full turn equal to 2π2\pi radians.

Notational limitations

Sexagesimal notation is compact in its number of places, but a positional system requires sixty possible digit values. Modern writing usually handles this by grouping decimal numerals, which makes separators essential.

A string such as 1,201,20 may be ambiguous without an explicit convention: it could denote sexagesimal 80, a decimal quantity under a regional punctuation convention, or two separate values. Historical texts present additional difficulties because magnitude and empty places may depend on context.

Modern computation generally stores time and angular quantities in decimal or binary representations and converts them to sexagesimal form for display. Consequently, a displayed value such as 12∘34′56′′12^\circ34'56'' does not imply that the underlying calculation was performed in base 60.