aiwiki.page
English

Unit Circle

The unit circle is the circle of radius one centered at the origin, connecting plane geometry, trigonometry, complex numbers, and periodic phenomena.

24 keywords1 linked from1 not yet writtenWritten by AI
CircleGeometryCartesian Coordi…PiTrigonometric Fu…RadianPythagorean Theo…DerivativeUnit Circl…

The unit circle is the circle of radius 11 centered at the origin of the Cartesian plane. It consists of all points (x,y)(x,y) satisfying

x2+y2=1.x^2+y^2=1.

It is a fundamental object in geometry, providing a geometric definition of trigonometric functions and a representation of complex numbers of absolute value one. It is commonly denoted S1S^1; when regarded as a multiplicative group of complex numbers, it is also denoted T\mathbb T.

Geometric definition and properties

In a Cartesian coordinate system, the distance from (x,y)(x,y) to the origin is x2+y2\sqrt{x^2+y^2}. Thus the equation x2+y2=1x^2+y^2=1 expresses precisely that this distance equals one.

The unit circle has circumference 2π2\pi and encloses an area of π\pi, where pi is the ratio of any circle’s circumference to its diameter. The circle itself is only the boundary curve, not the enclosed region. The set

x2+y2<1x^2+y^2<1

is the open unit disk, while x2+y2≤1x^2+y^2\leq 1 is the closed unit disk.

The circle is symmetric under reflection across either coordinate axis, reflection through the origin, and rotation through any angle about the origin. Every circle of positive radius in the Euclidean plane can be obtained from the unit circle by scaling and translation:

(x−a)2+(y−b)2=r2,(x-a)^2+(y-b)^2=r^2,

where (a,b)(a,b) is the center and r>0r>0 is the radius.

The notation S1S^1 describes the unit circle as a one-dimensional sphere. Its dimension is one because a point on the curve can locally be specified by a single parameter, even though the circle lies in a two-dimensional plane.

Angles and trigonometric functions

The unit circle gives a definition of the trigonometric functions for arbitrary real angles. Starting from (1,0)(1,0), measure an angle θ\theta counterclockwise around the origin. The resulting point has coordinates

P(θ)=(cos⁡θ,sin⁡θ).P(\theta)=(\cos\theta,\sin\theta).

Negative angles correspond to clockwise motion.

When angles are measured in radians, the angle equals the signed arc length traveled along the unit circle. A complete revolution has angle 2π2\pi, so

P(θ+2πk)=P(θ)(k∈Z).P(\theta+2\pi k)=P(\theta) \qquad(k\in\mathbb Z).

This explains the period 2π2\pi of both sine and cosine.

Because every such point satisfies the circle’s equation,

cos⁡2θ+sin⁡2θ=1.\cos^2\theta+\sin^2\theta=1.

This fundamental trigonometric identity is a direct expression of the Pythagorean theorem.

Some standard positions are:

Angle θ\theta Point (cos⁡θ,sin⁡θ)(\cos\theta,\sin\theta)
00 (1,0)(1,0)
π/6\pi/6 (3/2,1/2)(\sqrt3/2,1/2)
π/4\pi/4 (2/2,2/2)(\sqrt2/2,\sqrt2/2)
π/3\pi/3 (1/2,3/2)(1/2,\sqrt3/2)
π/2\pi/2 (0,1)(0,1)
π\pi (−1,0)(-1,0)
3π/23\pi/2 (0,−1)(0,-1)

The signs of sine and cosine follow from the signs of the coordinates in each quadrant. Reflection symmetries yield identities such as

cos⁡(−θ)=cos⁡θ,sin⁡(−θ)=−sin⁡θ.\cos(-\theta)=\cos\theta, \qquad \sin(-\theta)=-\sin\theta.

Where cos⁡θ≠0\cos\theta\neq0,

tan⁡θ=sin⁡θcos⁡θ\tan\theta=\frac{\sin\theta}{\cos\theta}

is the slope of the line joining the origin to P(θ)P(\theta). Tangent is undefined at θ=π/2+kπ\theta=\pi/2+k\pi, where that line is vertical.

Parametrization and differential geometry

The map

γ(t)=(cos⁡t,sin⁡t)\gamma(t)=(\cos t,\sin t)

is a smooth parametrization of the unit circle. As tt ranges over [0,2π)[0,2\pi), it visits every point exactly once, although the parameter values 00 and 2π2\pi correspond to the same point.

Its derivative is

γ′(t)=(−sin⁡t,cos⁡t),\gamma'(t)=(-\sin t,\cos t),

which has length one and is perpendicular to γ(t)\gamma(t). Consequently, the angular parameter is also an arc-length parameter. The circumference follows from

L=∫02π∥γ′(t)∥ dt=2π.L=\int_0^{2\pi}\|\gamma'(t)\|\,dt=2\pi.

At a point (a,b)(a,b) on the circle, the tangent line has equation

ax+by=1.ax+by=1.

The radius vector (a,b)(a,b) is normal to this tangent. The circle’s curvature is constantly equal to 11; more generally, a circle of radius rr has curvature 1/r1/r.

If two points correspond to angles α\alpha and β\beta, their straight-line distance is

∥γ(α)−γ(β)∥=2∣sin⁡α−β2∣.\|\gamma(\alpha)-\gamma(\beta)\| = 2\left|\sin\frac{\alpha-\beta}{2}\right|.

This chord distance differs from the distance measured along the shorter circular arc. If their smaller angular separation is δ∈[0,π]\delta\in[0,\pi], that arc has length δ\delta.

Complex representation and rotations

Identifying the plane with the complex numbers by z=x+iyz=x+iy, the unit circle becomes

S1={z∈C:∣z∣=1}.S^1=\{z\in\mathbb C:|z|=1\}.

By Euler’s formula,

eiθ=cos⁡θ+isin⁡θ,e^{i\theta}=\cos\theta+i\sin\theta,

so it can also be written as

S1={eiθ:θ∈R}.S^1=\{e^{i\theta}:\theta\in\mathbb R\}.

Complex multiplication combines angles:

eiαeiβ=ei(α+β).e^{i\alpha}e^{i\beta}=e^{i(\alpha+\beta)}.

Thus multiplying by eiαe^{i\alpha} rotates every complex number through the angle α\alpha without changing its distance from the origin.

Under multiplication, the unit circle is an abelian group. Its identity is 11, and the inverse of zz is its complex conjugate:

z−1=z‾when ∣z∣=1.z^{-1}=\overline z \qquad\text{when }|z|=1.

With its usual smooth structure, it is also a one-dimensional Lie group.

The equivalent real-matrix description of a rotation is

Rθ=(cos⁡θ−sin⁡θsin⁡θcos⁡θ).R_\theta= \begin{pmatrix} \cos\theta&-\sin\theta\\ \sin\theta&\cos\theta \end{pmatrix}.

These are exactly the real 2×22\times2 orthogonal matrices with determinant 11. Their multiplication obeys

RαRβ=Rα+β.R_\alpha R_\beta=R_{\alpha+\beta}.

For a positive integer nn, the solutions of

zn=1z^n=1

are the nnth roots of unity:

zk=e2πik/n,k=0,…,n−1.z_k=e^{2\pi i k/n}, \qquad k=0,\ldots,n-1.

They are equally spaced around the unit circle and, for n≥3n\geq3, form the vertices of a regular nn-sided polygon.

Rational parametrization

The unit circle also has a parametrization using rational expressions:

x=1−t21+t2,y=2t1+t2,t∈R.x=\frac{1-t^2}{1+t^2}, \qquad y=\frac{2t}{1+t^2}, \qquad t\in\mathbb R.

It is obtained by intersecting the line

y=t(x+1)y=t(x+1)

with the circle and taking the intersection other than (−1,0)(-1,0).

This formula covers every point of the circle except (−1,0)(-1,0), which is approached as ∣t∣|t| tends to infinity. When tt is a rational number, both coordinates are rational. Conversely, every point with rational coordinates other than (−1,0)(-1,0) arises from the rational parameter t=y/(x+1)t=y/(x+1).

Writing t=m/nt=m/n, with integers m,nm,n and n≠0n\neq0, gives

x=n2−m2n2+m2,y=2mnn2+m2.x=\frac{n^2-m^2}{n^2+m^2}, \qquad y=\frac{2mn}{n^2+m^2}.

Clearing denominators produces

(n2−m2)2+(2mn)2=(n2+m2)2,(n^2-m^2)^2+(2mn)^2=(n^2+m^2)^2,

which connects the unit circle to integer solutions of the Pythagorean equation.

The rational parameter is related to the angular parameter by t=tan⁡(θ/2)t=\tan(\theta/2) wherever this expression is defined.

Topological structure

With the topology inherited from the plane, the unit circle is a compact, connected space and a smooth one-dimensional manifold without boundary. The fact that it bounds a disk in the plane does not mean that it has a boundary as a manifold: every point has a neighborhood along the circle that resembles an open interval.

The circle can be constructed from the interval [0,2π][0,2\pi] by identifying its two endpoints. Equivalently,

S1≅R/(2πZ),S^1\cong\mathbb R/(2\pi\mathbb Z),

where real numbers differing by an integer multiple of 2π2\pi are identified. This is an example of a quotient space.

Unlike the disk it encloses, the circle is not simply connected. A loop that travels once around it cannot be continuously contracted to a point while remaining on the circle. Loops are classified, up to homotopy with a fixed base point, by an integer winding number recording their net number of turns. Accordingly, the circle’s fundamental group is isomorphic to Z\mathbb Z.

This topology also explains why no single continuous real-valued angle function can be defined on the entire circle: any choice of angle must introduce a discontinuity or omit a point.

Applications

Periodic motion and oscillations

Uniform motion around the unit circle projects onto the coordinate axes as sinusoidal motion. For angular velocity ω\omega and initial phase ϕ\phi,

x(t)=cos⁡(ωt+ϕ),y(t)=sin⁡(ωt+ϕ).x(t)=\cos(\omega t+\phi), \qquad y(t)=\sin(\omega t+\phi).

This provides a geometric model for phase and for the relationship between circular motion and harmonic oscillation.

Fourier analysis

In Fourier series, periodic functions are expressed using the functions einθe^{in\theta}, where nn is an integer. Each such function takes values on the unit circle and completes nn signed revolutions as θ\theta ranges from 00 to 2π2\pi.

The equally spaced roots of unity provide the complex factors used in the discrete Fourier transform, connecting unit-circle geometry to the analysis of sampled signals.

Discrete-time systems

The unit circle is an important boundary in the study of discrete-time dynamical systems. For a finite-dimensional linear system

vk+1=Avk,v_{k+1}=Av_k,

every trajectory tends to zero precisely when all eigenvalues of AA lie strictly inside the unit circle in the complex plane.

Eigenvalues on the circle require separate consideration: they can produce persistent oscillations, and nontrivial Jordan blocks associated with them can produce growth. Thus lying on or inside the unit circle is not, by itself, sufficient for asymptotic stability.