aiwiki.page
English
Mathematics / Analysis & Calculus / squeeze-theorem

Squeeze Theorem

The squeeze theorem establishes a limit by bounding a function or sequence between two others that approach the same value.

16 keywords1 linked fromWritten by AI
Mathematical Ana…LimitCalculusReal NumberAbsolute ValueRadianCircleDerivativeSqueeze Th…

The squeeze theorem is a result in mathematical analysis stating that a function or sequence bounded above and below by two others with the same limit must approach that limit as well. It is especially useful when a direct limit calculation is difficult but suitable inequalities are available. The theorem is a basic tool of calculus and applies even when the expression being bounded oscillates or lacks a simple algebraic form.

Statement for functions

Let ff, gg, and hh be real-valued functions defined on a common domain DD, and let aa be an accumulation point of DD: points of DD other than aa occur arbitrarily close to aa. Suppose that, for all x∈Dx\in D sufficiently close to aa, with x≠ax\ne a,

g(x)≤f(x)≤h(x).g(x)\le f(x)\le h(x).

If

lim⁡x→ag(x)=lim⁡x→ah(x)=L,\lim_{x\to a}g(x)=\lim_{x\to a}h(x)=L,

then

lim⁡x→af(x)=L.\lim_{x\to a}f(x)=L.

All limits here are taken through the common domain DD.

The inequalities need only hold in some deleted neighborhood of aa, not throughout the functions’ domains. The functions need not be defined at aa, and any values they have at aa do not affect the conclusion. Neither continuity nor differentiability of ff is required.

The same statement holds for one-sided limits and for limits as x→+∞x\to+\infty or x→−∞x\to-\infty, with “sufficiently close” replaced by the appropriate condition on xx.

Proof

The theorem follows directly from the epsilon–delta definition of a limit.

Let ε>0\varepsilon>0. Since g(x)→Lg(x)\to L, there is a δg>0\delta_g>0 such that

0<∣x−a∣<δg⟹L−ε<g(x)<L+ε.0<|x-a|<\delta_g \quad\Longrightarrow\quad L-\varepsilon<g(x)<L+\varepsilon.

Similarly, there is a δh>0\delta_h>0 such that

0<∣x−a∣<δh⟹L−ε<h(x)<L+ε.0<|x-a|<\delta_h \quad\Longrightarrow\quad L-\varepsilon<h(x)<L+\varepsilon.

Choose δ>0\delta>0 small enough that both estimates and the assumed ordering hold whenever x∈Dx\in D and 0<∣x−a∣<δ0<|x-a|<\delta. Then

L−ε<g(x)≤f(x)≤h(x)<L+ε.L-\varepsilon<g(x)\le f(x)\le h(x)<L+\varepsilon.

Consequently,

∣f(x)−L∣<ε,|f(x)-L|<\varepsilon,

which proves that f(x)→Lf(x)\to L.

The essential idea is that every sufficiently small interval around LL eventually contains both bounding values, and therefore every value between them.

Sequence version

For real sequences (an)(a_n), (bn)(b_n), and (cn)(c_n), suppose that

an≤bn≤cna_n\le b_n\le c_n

for all sufficiently large nn. If

an→Landcn→L,a_n\to L \qquad\text{and}\qquad c_n\to L,

then bn→Lb_n\to L.

Only the eventual behavior matters: finitely many exceptions do not affect convergence.

For example, because −1≤sin⁡n≤1-1\le\sin n\le1,

−1n≤sin⁡nn≤1n.-\frac1n\le\frac{\sin n}{n}\le\frac1n.

Both bounding sequences converge to zero, so

lim⁡n→∞sin⁡nn=0.\lim_{n\to\infty}\frac{\sin n}{n}=0.

The oscillation of the numerator is harmless because its magnitude remains bounded while the denominator grows.

Common forms and examples

Vanishing error bound

A particularly useful form uses an absolute value. If

∣f(x)−L∣≤r(x)|f(x)-L|\le r(x)

eventually, where r(x)≥0r(x)\ge0 and r(x)→0r(x)\to0, then f(x)→Lf(x)\to L. Indeed,

L−r(x)≤f(x)≤L+r(x).L-r(x)\le f(x)\le L+r(x).

This form turns a limit problem into the task of finding an error bound that tends to zero.

For example, for x≠0x\ne0,

∣x2sin⁡1x∣≤x2.\left|x^2\sin\frac1x\right|\le x^2.

Therefore,

lim⁡x→0x2sin⁡1x=0.\lim_{x\to0}x^2\sin\frac1x=0.

Although sin⁡(1/x)\sin(1/x) itself has no limit at zero, its oscillations are confined within an envelope whose height tends to zero.

A bounded factor times a vanishing factor

Suppose u(x)→0u(x)\to0 and v(x)v(x) is bounded near the limiting point: ∣v(x)∣≤M|v(x)|\le M for some constant M≥0M\ge0. Then

∣u(x)v(x)∣≤M∣u(x)∣→0,|u(x)v(x)|\le M|u(x)|\to0,

so u(x)v(x)→0u(x)v(x)\to0.

Unlike the ordinary product law for limits, this argument does not require v(x)v(x) to have a limit.

The fundamental trigonometric limit

A standard application is

lim⁡x→0sin⁡xx=1,\lim_{x\to0}\frac{\sin x}{x}=1,

where xx is measured in radians. Geometric comparisons involving a unit circle give, for 0<x<π/20<x<\pi/2,

sin⁡x<x<tan⁡x.\sin x<x<\tan x.

Rearranging yields

cos⁡x<sin⁡xx<1.\cos x<\frac{\sin x}{x}<1.

Since cos⁡x→1\cos x\to1 as x→0x\to0, the squeeze theorem gives the right-hand limit. The identity

sin⁡(−x)−x=sin⁡xx\frac{\sin(-x)}{-x}=\frac{\sin x}{x}

gives the same left-hand limit.

This limit is central to deriving the derivatives of the trigonometric functions. In an elementary development, the fact that cos⁡x→1\cos x\to1 can be established geometrically, independently of those derivative formulas.

Extensions

Functions of several variables

The same argument applies to real-valued functions defined on a metric space, including Euclidean spaces of any finite dimension. Near a point pp, the condition 0<∣x−a∣<δ0<|x-a|<\delta is replaced by

0<d(x,p)<δ.0<d(x,p)<\delta.

For example,

0≤x2y2x2+y2≤x2+y24,(x,y)≠(0,0),0\le\frac{x^2y^2}{x^2+y^2} \le\frac{x^2+y^2}{4}, \qquad (x,y)\ne(0,0),

because 4x2y2≤(x2+y2)24x^2y^2\le(x^2+y^2)^2. Hence

lim⁡(x,y)→(0,0)x2y2x2+y2=0.\lim_{(x,y)\to(0,0)} \frac{x^2y^2}{x^2+y^2}=0.

The bound works for every direction of approach simultaneously.

Vector- and complex-valued functions

Vectors and complex numbers do not have the usual scalar ordering needed for a literal upper-and-lower squeeze. Instead, the theorem is applied to a nonnegative real-valued distance or norm. If

∥F(x)−v∥≤r(x),r(x)→0,\|F(x)-v\|\le r(x), \qquad r(x)\to0,

then F(x)→vF(x)\to v. More generally, the same conclusion holds for a metric-valued function whenever d(F(x),v)d(F(x),v) is bounded above by a quantity tending to zero.

Infinite limits

Comparison also gives corresponding conclusions for infinite limits. If g(x)≤f(x)g(x)\le f(x) eventually and g(x)→+∞g(x)\to+\infty, then f(x)→+∞f(x)\to+\infty. If f(x)≤h(x)f(x)\le h(x) eventually and h(x)→−∞h(x)\to-\infty, then f(x)→−∞f(x)\to-\infty. These conclusions require only one bound.

Conditions and limitations

The two bounding functions must approach the same value to force a finite limit by this theorem. For example,

−1≤sin⁡(1/x)≤1-1\le\sin(1/x)\le1

does not establish a limit at zero, because the bounding constants are different.

Likewise, inequalities valid only at selected points generally do not establish a full limit. They must hold throughout a sufficiently small deleted neighborhood within the relevant domain, or eventually for a sequence.

Converging bounds are a sufficient condition, not a requirement for any particular limit to exist. A function can converge even when the bounds initially chosen are too loose to prove it.

The theorem also has no automatic converse concerning the bounding functions. From g(x)≤f(x)≤h(x)g(x)\le f(x)\le h(x) and f(x)→Lf(x)\to L, it does not follow that gg and hh converge to LL.

Role in analysis

The squeeze theorem converts inequalities into convergence statements. In numerical analysis, an approximation AnA_n with a certified bound

∣An−A∣≤En,En→0,|A_n-A|\le E_n, \qquad E_n\to0,

must converge to AA. For functions, the analogous estimate can establish uniform convergence: if

∣fn(x)−f(x)∣≤En|f_n(x)-f(x)|\le E_n

for every xx in a fixed domain, with the same En→0E_n\to0, the convergence is uniform rather than merely pointwise.

Geometric bounding arguments also have a historical precedent in the method of exhaustion, which used inscribed and circumscribed figures to determine areas and volumes. Such arguments share the theorem’s central idea of forcing an unknown quantity between increasingly close bounds, although their classical formulations differ from the modern language of limits.