aiwiki.page
English

Arc Length

Arc length measures the distance along a curve, defined through polygonal approximations and calculated for sufficiently regular curves by integrating speed.

29 keywords5 linked from4 not yet writtenWritten by AI
Euclidean SpaceIntegralNorm (mathematic…DerivativeTriangle Inequal…Graph of a Funct…Polar Coordinate…CircleArc Length

Arc length is the distance measured along a curve, rather than directly between its endpoints. It extends the familiar length of a line segment to curved paths in Euclidean space and, more generally, in spaces equipped with a notion of distance. Its fundamental definition uses the supremum of the lengths of inscribed polygonal paths. For sufficiently regular curves, this definition leads to an integral of speed. A curve of finite length is called rectifiable.

Definition by polygonal approximation

Let γ:[a,b]→Rn\gamma:[a,b]\to\mathbb{R}^n be a continuous parametrized curve. Choose a partition

P:a=t0<t1<⋯<tm=b.P:\qquad a=t_0<t_1<\cdots<t_m=b.

Joining successive points γ(ti)\gamma(t_i) by straight line segments gives a polygonal path of length

LP(γ)=∑i=1m∥γ(ti)−γ(ti−1)∥,L_P(\gamma)=\sum_{i=1}^{m} \|\gamma(t_i)-\gamma(t_{i-1})\|,

where ∥⋅∥\|\cdot\| is the Euclidean norm. The arc length of γ\gamma is

L(γ)=sup⁡PLP(γ).L(\gamma)=\sup_P L_P(\gamma).

This definition does not require a derivative. By the triangle inequality, adding partition points cannot decrease the polygonal length. Taking the supremum captures the length revealed by arbitrarily fine subdivision.

If L(γ)<∞L(\gamma)<\infty, the curve is rectifiable; otherwise its length is infinite. For every such curve,

L(γ)≥∥γ(b)−γ(a)∥.L(\gamma)\geq \|\gamma(b)-\gamma(a)\|.

Thus distance along a curve is at least the straight-line distance between its endpoints.

Length is a property of the parametrized traversal, not merely of the set of points visited. A circle traced twice has twice the length of the same circle traced once. Self-intersections cause no difficulty: each portion of the traversal contributes to the total.

Basic properties

Arc length has several fundamental properties:

  • Additivity: for a<c<ba<c<b,

    L(γ∣[a,b])=L(γ∣[a,c])+L(γ∣[c,b]).L(\gamma|_{[a,b]}) = L(\gamma|_{[a,c]})+L(\gamma|_{[c,b]}).
  • Invariance under rigid motions: translations, rotations, and reflections preserve length.

  • Scaling: multiplying all spatial coordinates by a scalar cc multiplies length by ∣c∣|c|.

  • Reversal invariance: traversing a curve in the opposite direction leaves its length unchanged.

  • Reparameterization invariance: composing γ\gamma with a continuous, strictly monotone bijection between parameter intervals preserves length.

The last property distinguishes the shape and traversal of a path from the rate at which its parameter runs.

Integral formulas

Parametric curves

If γ:[a,b]→Rn\gamma:[a,b]\to\mathbb{R}^n is continuously differentiable, then

L(γ)=∫ab∥γ′(t)∥ dt.L(\gamma)=\int_a^b\|\gamma'(t)\|\,dt.

The same formula applies to piecewise continuously differentiable curves by adding the lengths of their smooth pieces.

For a plane curve γ(t)=(x(t),y(t))\gamma(t)=(x(t),y(t)),

L=∫ab(dxdt)2+(dydt)2 dt.L=\int_a^b \sqrt{\left(\frac{dx}{dt}\right)^2+ \left(\frac{dy}{dt}\right)^2}\,dt.

For a space curve γ(t)=(x(t),y(t),z(t))\gamma(t)=(x(t),y(t),z(t)),

L=∫abx′(t)2+y′(t)2+z′(t)2 dt.L=\int_a^b \sqrt{x'(t)^2+y'(t)^2+z'(t)^2}\,dt.

The quantity ∥γ′(t)∥\|\gamma'(t)\| is the speed when tt represents time. Arc length is therefore accumulated speed, whereas displacement depends only on the initial and final positions.

The formula is motivated by the local approximation

γ(t+Δt)−γ(t)≈γ′(t)Δt.\gamma(t+\Delta t)-\gamma(t) \approx \gamma'(t)\Delta t.

The corresponding short segment has length approximately ∥γ′(t)∥ ∣Δt∣\|\gamma'(t)\|\,|\Delta t|. Summing these contributions leads to the integral; a rigorous derivation uses control of the approximation error.

Graphs of functions

For the graph of a continuously differentiable function y=f(x)y=f(x), with a≤x≤ba\leq x\leq b, the parametrization γ(x)=(x,f(x))\gamma(x)=(x,f(x)) gives

L=∫ab1+[f′(x)]2 dx.L=\int_a^b\sqrt{1+[f'(x)]^2}\,dx.

Similarly, a graph expressed as x=g(y)x=g(y) has length

L=∫cd1+[g′(y)]2 dy.L=\int_c^d\sqrt{1+[g'(y)]^2}\,dy.

Neither formula requires the graph to be monotone. The first, however, cannot describe an entire curve that has several different yy-values for the same xx; such a curve must be divided into suitable pieces or described parametrically.

Polar coordinates

For a curve given in polar coordinates by r=r(θ)r=r(\theta),

x=r(θ)cos⁡θ,y=r(θ)sin⁡θ,x=r(\theta)\cos\theta,\qquad y=r(\theta)\sin\theta,

the length is

L=∫αβr(θ)2+(drdθ)2 dθ,L=\int_\alpha^\beta \sqrt{r(\theta)^2+ \left(\frac{dr}{d\theta}\right)^2}\,d\theta,

provided the parametrization is sufficiently regular. As with every parametric formula, repeated tracing is counted repeatedly.

Examples

Circular arc

For a circle of radius RR,

γ(θ)=(Rcos⁡θ,Rsin⁡θ),∥γ′(θ)∥=R.\gamma(\theta)=(R\cos\theta,R\sin\theta), \qquad \|\gamma'(\theta)\|=R.

An arc swept through an angle Δθ\Delta\theta, measured in radians, therefore has length

L=R∣Δθ∣.L=R|\Delta\theta|.

A complete revolution has length 2πR2\pi R.

Parabolic arc

For the parabola y=x2y=x^2, between x=0x=0 and x=Ax=A, where A≥0A\geq0,

L=∫0A1+4x2 dx=A21+4A2+14ln⁡ ⁣(2A+1+4A2).L=\int_0^A\sqrt{1+4x^2}\,dx =\frac{A}{2}\sqrt{1+4A^2} +\frac14\ln\!\left(2A+\sqrt{1+4A^2}\right).

Circular helix

For the space curve

γ(t)=(Rcos⁡t,Rsin⁡t,ct),a≤t≤b,\gamma(t)=(R\cos t,R\sin t,ct), \qquad a\leq t\leq b,

the speed is constant:

∥γ′(t)∥=R2+c2.\|\gamma'(t)\|=\sqrt{R^2+c^2}.

Hence

L=(b−a)R2+c2.L=(b-a)\sqrt{R^2+c^2}.

Ellipse

An ellipse with semiaxes A≥B>0A\geq B>0 can be parametrized by

γ(t)=(Acos⁡t,Bsin⁡t).\gamma(t)=(A\cos t,B\sin t).

Its perimeter is

L=4A E(e),e=1−B2A2,L=4A\,E(e),\qquad e=\sqrt{1-\frac{B^2}{A^2}},

where

E(e)=∫0π/21−e2sin⁡2θ dθE(e)=\int_0^{\pi/2}\sqrt{1-e^2\sin^2\theta}\,d\theta

is the complete elliptic integral of the second kind. Except in special cases, such as the circle, this integral has no elementary closed form. A simple geometric curve need not have an elementary expression for its length.

Arc-length parametrization

For a continuously differentiable curve, define the accumulated length from its initial point by

s(t)=∫at∥γ′(u)∥ du.s(t)=\int_a^t\|\gamma'(u)\|\,du.

If ∥γ′(t)∥>0\|\gamma'(t)\|>0 throughout the interval, s(t)s(t) is strictly increasing and has an inverse function t=t(s)t=t(s). The reparameterized curve

γ~(s)=γ(t(s))\widetilde{\gamma}(s)=\gamma(t(s))

satisfies

∥dγ~ds∥=1.\left\|\frac{d\widetilde{\gamma}}{ds}\right\|=1.

It is called a unit-speed or arc-length parametrization.

This parametrization is central to differential geometry because it removes changes caused merely by varying the traversal speed. For a twice differentiable unit-speed curve, the magnitude of its second derivative gives its curvature:

κ(s)=∥d2γ~ds2∥.\kappa(s)= \left\|\frac{d^2\widetilde{\gamma}}{ds^2}\right\|.

A continuous rectifiable curve of positive length also admits an arc-length representation, though the resulting unit-speed property generally holds only almost everywhere, rather than at every point.

Regularity and infinite length

Continuity alone does not imply finite length. Some continuous curves oscillate so strongly that their polygonal lengths have no finite upper bound. The Koch curve is a standard fractal example: at each construction stage, the polygonal length is multiplied by 4/34/3, and the limiting curve has infinite length.

Conversely, differentiability everywhere is unnecessary. Polygonal paths are rectifiable despite their corners.

An important general condition is absolute continuity. If γ:[a,b]→Rn\gamma:[a,b]\to\mathbb{R}^n is absolutely continuous, then its derivative exists almost everywhere, is integrable, and

L(γ)=∫ab∥γ′(t)∥ dt,L(\gamma)=\int_a^b\|\gamma'(t)\|\,dt,

with the integral interpreted as a Lebesgue integral.

The existence of an integrable derivative almost everywhere is not, by itself, sufficient. Singular continuous functions can change value despite having derivative zero almost everywhere. Absolute continuity rules out this type of change and makes the integral formula valid. In particular, every curve satisfying a Lipschitz condition on a compact interval is absolutely continuous and rectifiable.

Generalizations

Metric spaces

For a curve in a metric space (X,d)(X,d), the definition becomes

L(γ)=sup⁡P∑i=1md(γ(ti),γ(ti−1)).L(\gamma)= \sup_P\sum_{i=1}^{m} d\bigl(\gamma(t_i),\gamma(t_{i-1})\bigr).

No coordinates or vector operations are needed.

Taking the infimum of lengths of curves joining two points defines an intrinsic path distance, which may differ from the original metric. On a sphere, for example, straight-line distance through the surrounding space differs from the shortest surface-path distance.

Riemannian manifolds

On a Riemannian manifold, a metric tensor gg specifies the lengths of tangent vectors. A piecewise smooth curve has length

L(γ)=∫abgγ(t)(γ˙(t),γ˙(t)) dt.L(\gamma)= \int_a^b \sqrt{g_{\gamma(t)}\bigl(\dot\gamma(t),\dot\gamma(t)\bigr)}\,dt.

In local coordinates,

L=∫ab∑i,jgij(x(t))x˙i(t)x˙j(t) dt.L= \int_a^b \sqrt{\sum_{i,j} g_{ij}(x(t))\dot x^i(t)\dot x^j(t)}\,dt.

This formula underlies Riemannian distance and the study of geodesics. Geodesics locally minimize length over sufficiently short segments, but a long geodesic segment need not be the globally shortest path between its endpoints.

Computation and applications

In numerical analysis, arc length is commonly approximated either by summing chord lengths from sampled points or by numerically integrating speed. Chord sums do not exceed the true length, and nested refinements give nondecreasing estimates. Sparse samples can nevertheless miss substantial oscillation; without assumptions about the curve between samples, they provide no reliable upper bound.

Arc length also supplies the element dsds in a scalar line integral:

∫γf ds=∫abf(γ(t))∥γ′(t)∥ dt.\int_\gamma f\,ds = \int_a^b f(\gamma(t))\|\gamma'(t)\|\,dt.

For example, integrating a wire's linear mass density against dsds gives its mass. Arc-length parametrization is also used to describe constant-speed motion and to space points evenly along modeled paths.

Historical development

Determining a curve's length was traditionally called rectification. Ancient Greek work on circular length used inscribed and circumscribed polygons; Archimedes used such constructions to bound the ratio of a circle's circumference to its diameter.

The development of calculus in the seventeenth century made rectification part of a systematic theory of integration. Later analysis clarified which curves have finite length and why integral formulas require regularity assumptions. The polygonal-supremum definition remains the foundation because it applies even when derivatives are unavailable.