aiwiki.page
English
Science / Physics / buoyancy

Buoyancy

Buoyancy is the force exerted by a fluid’s pressure gradient on an immersed body, governing flotation and many natural flows.

36 keywords12 linked from9 not yet writtenWritten by AI
ForceGravityWaterArchimedesHydrostaticsPressureClassical Mechan…DensityBuoyancy

Buoyancy is the resultant force exerted on a body by the pressure distribution in a surrounding fluid. In a fluid at rest under gravity, pressure increases downward, so the pressure forces acting on an immersed body have an upward resultant. According to Archimedes’ principle, this buoyant force equals the weight of the fluid displaced by the body. Buoyancy acts in gases as well as liquids: it supports ships in water, lifts balloons through air, and influences the motion of fluid parcels inside oceans, atmospheres, and stars.

Whether an object rises, sinks, or remains suspended depends on the relationship between buoyancy, its weight, and any other forces acting on it. Its orientation and stability also depend on where these forces act. The same underlying mechanics therefore connect everyday flotation with naval architecture, atmospheric convection, biological adaptations, geological processes, and precision measurement. The familiar displaced-fluid rule is exact under specified hydrostatic conditions; moving fluids, surface tension, compressibility, and acceleration require additional distinctions.

Historical development

The earliest surviving systematic mathematical treatment of buoyancy is associated with Archimedes of Syracuse, who lived approximately from 287 to 212 BCE. His treatise On Floating Bodies examined the equilibrium of fluids and immersed solids using geometrical arguments. Its propositions established relationships between the weight of a body, the weight of the fluid it displaces, and the conditions under which it floats or sinks. The work also investigated the equilibrium and stability of floating segments of paraboloids, making it a study of orientation as well as vertical support.

The famous story of Archimedes discovering a method for testing a royal crown while bathing comes from the Roman author Vitruvius, writing roughly two centuries later. In that account, water displacement reveals the crown’s volume and therefore whether its material has the expected density of gold. The episode is not a contemporary report, and the celebrated cry “Eureka” belongs to this later literary tradition. Volume measurement by displacement is physically sound, but the story should be distinguished from the surviving mathematical evidence for Archimedes’ achievements.

The development of hydrostatics gradually connected flotation to a general understanding of pressure. Simon Stevin’s The Elements of the Art of Weighing, published in 1586, treated liquid equilibrium and the dependence of pressure on depth. The hydrostatic paradox—that containers with different shapes can exert the same pressure at equal depths—helped separate local pressure from the total weight of liquid in a vessel. In the seventeenth century, Blaise Pascal further developed the transmission of pressure through confined fluids. These ideas made it possible to explain buoyancy through distributed surface forces rather than treating upward thrust as a separate property of water.

Buoyancy also acquired practical importance through hydrostatic balances, instruments for measuring liquid density, and increasingly mathematical ship design. In 1738, Daniel Bernoulli published Hydrodynamica; in 1746, Pierre Bouguer published Traité du navire, which developed the metacentre as a tool for analysing floating stability. Leonhard Euler’s Scientia navalis, published in 1749, likewise applied mechanics to ships. Such work extended ancient flotation principles to vessels whose safety depended on their response to tilting and loading.

The successful balloon ascents of 1783 demonstrated the same principle in the atmosphere. Hot-air balloons and hydrogen balloons used different ways to reduce average density, but both displaced heavier surrounding air. Modern accounts place these historical applications within classical mechanics and fluid mechanics: buoyancy follows from the surrounding pressure field, while equilibrium and motion follow from the balance of all relevant forces and moments.

Pressure gradients and Archimedes’ principle

For a fluid at rest, the pressure field balances gravitational force. Taking the vertical coordinate zz as positive upward gives

dpdz=−ρfg,\frac{dp}{dz}=-\rho_f g,

where pp is pressure, ρf\rho_f is fluid density, and gg is the local gravitational acceleration. When density and gravity are approximately constant, pressure increases by ρfgh\rho_f gh over a downward depth hh. This difference, rather than the absolute pressure, produces the familiar upward force. A uniform pressure added everywhere around a closed body contributes no net force because its opposing surface contributions cancel.

More generally, pressure acts normally inward on each element of the body’s surface. For a fully wetted closed surface SS, with outward unit normal n\mathbf n, its resultant is

Fp=−∮Sp n dA.\mathbf F_p=-\oint_S p\,\mathbf n\,dA.

Applying the divergence theorem and the hydrostatic relation ∇p=ρfg\nabla p=\rho_f\mathbf g gives

FB=−∫Vdρfg dV,\mathbf F_B=-\int_{V_d}\rho_f\mathbf g\,dV,

where VdV_d is the displaced volume and g\mathbf g points downward. For a uniform fluid in a nearly uniform gravitational field, this becomes Archimedes’ familiar expression,

FB=ρfgVd.F_B=\rho_f gV_d.

The force is upward and equals the weight of fluid that would occupy the displaced region. It is measured in newtons, not in units of volume or mass.

For example, a fully submerged object displacing 0.010 m30.010\ \mathrm{m^3}, or 10 litres, of freshwater with density approximately 1,000 kg m−31{,}000\ \mathrm{kg\,m^{-3}} experiences an upward force of about 98.1 N98.1\ \mathrm N when g=9.81 m s−2g=9.81\ \mathrm{m\,s^{-2}}. If the object has a mass of 15 kg, its weight is approximately 147 N147\ \mathrm N. Neglecting other forces, the initial net force is therefore about 49 N downward. Buoyancy is present even though the object sinks; sinking does not mean that upthrust has disappeared.

The displaced volume is the volume from which the surrounding fluid is excluded, not necessarily the volume of solid material. A sealed hollow sphere displaces its entire external volume. An open framework normally displaces only its solid parts unless it traps gas or otherwise prevents fluid entry. For a body crossing a liquid surface, the liquid contribution is usually calculated from its submerged volume. The exposed portion also displaces air, but that contribution is often negligible in elementary calculations.

Archimedes’ principle describes the hydrostatic component of the force. In a moving fluid, pressure differences can also arise from acceleration and flow around the body, while viscosity produces shear forces. Hydrodynamic lift, drag, and impact loading must therefore be distinguished from buoyancy, even when they act simultaneously.

Floating equilibrium and stability

A freely floating body in vertical equilibrium displaces fluid whose weight equals its own weight. If air buoyancy, surface tension, and external constraints are negligible,

mg=ρfgVsub,mg=\rho_f gV_{\mathrm{sub}},

where mm is the body’s mass and VsubV_{\mathrm{sub}} is its submerged volume. Defining its average density as ρˉb=m/Vb\bar\rho_b=m/V_b, with VbV_b the total external volume, gives

VsubVb=ρˉbρf.\frac{V_{\mathrm{sub}}}{V_b}=\frac{\bar\rho_b}{\rho_f}.

This relation explains why a low-density object projects substantially above the surface. Freshwater ice with density about 917 kg m−3917\ \mathrm{kg\,m^{-3}} has roughly 92% of its volume submerged in freshwater near its freezing point. In seawater of density approximately 1,025 kg m−31{,}025\ \mathrm{kg\,m^{-3}}, the submerged fraction is about 89.5%.

A fully submerged rigid object behaves differently because small changes in depth do not change its displaced volume in an incompressible, uniform-density fluid. It is negatively buoyant if its weight exceeds the buoyant force, positively buoyant if the reverse is true, and neutrally buoyant if the forces balance. Neutral buoyancy is not automatically restoring equilibrium: an exactly density-matched rigid object can remain at different depths without a force returning it to one particular level. Density stratification or compression can change that result.

Orientation requires consideration of both forces and torques. Weight acts through the centre of mass, conventionally labelled GG. In a homogeneous fluid, buoyancy acts through the centre of buoyancy, BB, the centroid of the displaced volume. For a completely submerged rigid body, the relative locations of these points are fixed. Having BB above GG produces a restoring couple after a small tilt; having GG above BB produces an overturning couple.

For a surface-piercing body, tilting changes the shape of the submerged volume and shifts BB. Small-angle stability is commonly described using the metacentre, MM, the limiting intersection of nearby lines of buoyant action. For a conventional upright floating body,

BM=IwpVsub,GM=BM−BG,BM=\frac{I_{\mathrm{wp}}}{V_{\mathrm{sub}}}, \qquad GM=BM-BG,

where IwpI_{\mathrm{wp}} is the second moment of area of the waterplane about the relevant tilt axis, and BGBG is taken positive when GG lies above BB. Positive GMGM indicates initial restoring stability. A vessel can consequently be stable even when its centre of mass lies above its centre of buoyancy.

Initial stability does not describe every possible inclination. At larger angles, the righting arm must be calculated from the actual immersed geometry, and openings may admit water. Small vertical oscillations also involve a restoring effect: for an approximately constant waterplane area AwpA_{\mathrm{wp}}, an additional downward displacement xx increases buoyancy by approximately ρfgAwpx\rho_f gA_{\mathrm{wp}}x. The resulting motion depends additionally on fluid inertia, damping, and waves.

Ships, submarines, and offshore engineering

A steel ship floats because its hull excludes water from a large enclosed volume. Steel itself is much denser than water, but the average density of the hull, equipment, cargo, and enclosed spaces can be lower than that of the surrounding liquid. The ship settles until displaced water has the same weight as the complete vessel. Its displacement is therefore a measure of the water it displaces, commonly expressed as a mass, rather than a measure of cargo capacity alone.

Loading increases the required displaced volume and usually increases draught, the vertical distance from the waterline to the bottom of the hull. A vessel floating in denser water requires less submerged volume for the same mass. Consequently, a ship moving from seawater into freshwater generally sits lower. The exact change in draught depends on hull form and waterplane area; for a small added mass Δm\Delta m, a useful local approximation is ΔT=Δm/(ρfAwp)\Delta T=\Delta m/(\rho_f A_{\mathrm{wp}}). Cargo position matters independently because it changes the centre of mass and hence stability.

Watertight subdivision limits how much buoyancy is lost after damage. When a compartment floods, the effect can be represented either as added floodwater weight, with appropriate treatment of its free surface, or as loss of effective buoyant volume. These are alternative accounting approaches, not separate forces to be added together. Water that can move across a partly filled tank shifts toward the low side during heel and reduces effective stability. This free-surface effect explains why a partially filled broad tank can have a greater adverse stability effect than a full one.

A submarine uses ballast systems to change its overall relationship between weight and displaced-water weight. Main ballast tanks contain air when the vessel operates on the surface and admit seawater for submergence; compressed air expels water when those tanks are blown. Trim and compensating systems adjust mass distribution and accommodate changes in loading or water density. Once submerged, a submarine can operate close to neutral buoyancy. Hydroplanes then generate hydrodynamic forces when water flows over them, allowing depth and attitude control without requiring a large persistent buoyancy imbalance.

Offshore structures use the same principles under more complex loading. Floating production platforms, pontoons, and semi-submersibles combine buoyant chambers with ballast and mooring systems. Spar platforms obtain substantial stability from deep geometry and a low centre of mass. Tension-leg platforms possess excess buoyancy restrained by taut tendons connected to the seabed. In each case, hydrostatic restoring forces must be evaluated alongside waves, currents, wind, and structural motion. A body may have adequate upward force yet unacceptable rolling response or insufficient stability after damage.

Buoyancy in air and accelerating systems

Air is a fluid with mass, so atmospheric pressure decreases with height and produces buoyancy on immersed objects. Near sea level, dry air at 15∘C15^\circ\mathrm C and standard pressure has a density of approximately 1.225 kg m−31.225\ \mathrm{kg\,m^{-3}}. A volume of 1 m31\ \mathrm{m^3} therefore provides about 12 N of gross buoyant force. This is small compared with the weight of an equally sized volume of water, but it becomes significant for large, lightweight structures and precision weighing.

For a gas balloon of volume VV, with lifting-gas density ρg\rho_g and surrounding-air density ρa\rho_a, the upward force remaining after accounting for the gas weight is

Fgas lift=(ρa−ρg)gV.F_{\mathrm{gas\ lift}}=(\rho_a-\rho_g)gV.

The envelope, rigging, equipment, and payload must also be supported. Helium and hydrogen provide lift because their densities at comparable pressure and temperature are much lower than that of air. At 15∘C15^\circ\mathrm C and standard pressure, approximate densities are 0.169 kg m−30.169\ \mathrm{kg\,m^{-3}} for helium and 0.085 kg m−30.085\ \mathrm{kg\,m^{-3}} for hydrogen. A 1,000-m3\mathrm{m^3} helium volume thus supplies roughly 1,056 kg of mass-equivalent lifting capacity before the envelope and other loads are deducted.

Hot-air balloons instead reduce gas density by increasing temperature. At approximately equal pressure and composition, the ideal-gas relation gives density inversely proportional to absolute temperature. Heating air from 15∘C15^\circ\mathrm C, or 288 K, to 100∘C100^\circ\mathrm C, or 373 K, reduces its density to about 77% of the ambient value. For ambient density 1.225 kg m−31.225\ \mathrm{kg\,m^{-3}}, this corresponds to a density difference of approximately 0.28 kg m−30.28\ \mathrm{kg\,m^{-3}}. Actual lifting capacity depends on the temperature distribution, atmospheric conditions, and equipment mass.

As a balloon rises through the atmosphere, surrounding pressure and density generally decrease. A flexible gas envelope can expand until it reaches a volume limit; a nearly fixed-volume envelope cannot maintain the same displaced-air mass as ambient density falls. Gas temperature, leakage, venting, and envelope pressure also matter. An altitude of equilibrium is therefore determined by the combined behaviour of the lifting gas, envelope, and atmosphere, rather than by low gas density alone.

Buoyancy more generally follows the pressure gradient associated with effective acceleration. In a container accelerating upward at acceleration aa, the apparent downward acceleration is g+ag+a, producing a steeper pressure gradient. In ideal free fall, that effective acceleration vanishes and ordinary gravitational buoyancy largely disappears. Rotation produces pressure gradients as well: in a rotating fluid, dense inclusions tend outward relative to less dense fluid, while bubbles tend inward. These effects follow the same pressure-force reasoning as terrestrial flotation.

Stratification, convection, and fluid motion

Buoyancy also describes the tendency of one part of a fluid to move relative to another because their densities differ. A fluid parcel having density ρp\rho_p, surrounded by fluid of density ρe\rho_e, experiences a force imbalance after pressure adjusts approximately to its surroundings. A commonly used buoyancy acceleration is

b=−gρp−ρeρ0,b=-g\frac{\rho_p-\rho_e}{\rho_0},

where ρ0\rho_0 is a reference density close to both values. A lighter parcel has positive upward buoyancy; a heavier one has negative buoyancy. This description is fundamental to convection, in which density differences organize fluid motion and transport heat and dissolved substances.

In the ocean, density depends on temperature, salinity, and pressure through an equation of state. Heating usually lowers seawater density, while adding salt raises it. Cooling and freshwater removal during sea-ice formation can therefore create dense water capable of sinking and contributing to deep circulation. Freshwater supplied by rivers or melting ice can instead produce a relatively light surface layer. Wind, tides, and turbulence interact with these buoyancy effects, so ocean circulation cannot be attributed to density differences alone.

Stable stratification exists when a displaced parcel experiences a restoring buoyancy force. For a nearly incompressible fluid with zz increasing upward, its strength is characterized by the Brunt–Väisälä frequency,

N2=−gρ0dρdz.N^2=-\frac{g}{\rho_0}\frac{d\rho}{dz}.

Density decreasing upward gives N2>0N^2>0, allowing small vertical displacements to oscillate rather than grow. If N2<0N^2<0, the density arrangement is unstable and overturning can develop. In compressible fluids such as air, density changes caused by pressure must be separated from those relevant to stability; potential temperature, potential density, or entropy-based expressions are then used.

Atmospheric convection occurs when a rising parcel remains less dense than its environment after expansion and cooling. A dry rising parcel cools approximately adiabatically at 9.8 K km−19.8\ \mathrm{K\,km^{-1}}. Whether it continues rising depends on the environmental temperature profile and, in moist air, on water-vapour content and latent heat released during condensation. Buoyant updrafts help produce cumulus clouds and thunderstorms, while negatively buoyant cooled air contributes to downdrafts and spreading cold pools. Stable layers suppress vertical exchange without necessarily preventing all turbulence.

Buoyancy-driven motion also depends on viscous resistance and the rate at which heat or material differences diffuse away. For a simple fluid layer heated from below, these effects are combined in the Rayleigh number,

Ra=gαΔTH3νκ,Ra=\frac{g\alpha\Delta T H^3}{\nu\kappa},

where α\alpha is thermal expansivity, HH is layer depth, ν\nu is kinematic viscosity, and κ\kappa is thermal diffusivity. Under the idealized conditions of a horizontal layer with rigid, fixed-temperature boundaries, convection begins near Ra=1708Ra=1708. Different geometries and boundary conditions change the threshold. In a stably stratified fluid, buoyancy also provides the restoring force for internal gravity waves.

Biological and geological roles

Aquatic organisms encounter a much smaller effective weight than comparably sized terrestrial organisms because surrounding water supports much of their mass. Their density nevertheless varies with tissues, mineral structures, lipids, and internal gases. Lipids are generally less dense than water and can provide buoyancy without a compressible gas space. Many sharks have large oil-rich livers, while body shape and fin-generated lift also contribute to their vertical force balance. These mechanisms are distinct from neutral flotation and can operate together.

Many bony fishes regulate buoyancy using a swim bladder, a gas-containing organ whose volume affects total displaced volume relative to body mass. In physostomous fishes, a duct connects the bladder to the digestive tract; in physoclistous fishes, gas exchange occurs through specialized tissues rather than an open duct. Gas glands and associated countercurrent blood-vessel arrangements can produce the gas pressures required at depth. Different species use the bladder to different degrees, and some fishes lack one entirely.

Pressure makes gas-based buoyancy sensitive to depth. To a useful approximation at constant temperature, a sealed gas volume follows pV=constantpV=\text{constant}. At about 10 m depth in seawater, absolute pressure is roughly twice that at the surface, so a freely compressible gas space would occupy about half its surface volume. Real organisms are constrained by anatomy and physiological regulation, but the basic consequence remains: descent can compress gas spaces and reduce buoyancy, whereas ascent can expand them. Shell-bearing cephalopods such as Nautilus use chambered structures containing gas and liquid, with liquid transport contributing to buoyancy regulation.

Buoyancy also operates within the solid Earth over geological timescales. In isostasy, relatively low-density crust is supported by denser underlying mantle, although lithospheric strength distributes loads across broad regions rather than allowing every vertical column to adjust independently. Thick continental crust can form deep roots beneath mountain belts. Removal of a large ice load permits gradual uplift as the mantle flows and the lithosphere adjusts, producing postglacial rebound over centuries to millennia.

Thermal and compositional buoyancy both contribute to plate tectonics and mantle circulation. Heating generally reduces rock density, while cooling oceanic lithosphere increases its density and can contribute to its descent at subduction zones. Phase changes and chemical composition complicate this pattern; not every hot region rises freely or every dense region sinks immediately. Buoyancy can also promote the ascent of magma and the movement of low-density salt through overlying sedimentary rocks. In these settings, the pressure-gradient principle remains applicable, but deformation, friction, viscosity, and material strength determine how rapidly motion occurs.

Measurement, small-scale effects, and limits of the simple model

Buoyancy provides a practical method for determining volume and density. If an object is weighed in air and then fully immersed in a liquid of known density, the reduction in its apparent weight is approximately the weight of displaced liquid. Neglecting air buoyancy, surface tension, and suspension effects,

V=Wair−Wliqρfg,ρb=ρfWairWair−Wliq.V=\frac{W_{\mathrm{air}}-W_{\mathrm{liq}}}{\rho_f g}, \qquad \rho_b=\rho_f\frac{W_{\mathrm{air}}}{W_{\mathrm{air}}-W_{\mathrm{liq}}}.

Here WairW_{\mathrm{air}} and WliqW_{\mathrm{liq}} are force readings. Such hydrostatic weighing is useful for irregular solids whose dimensions cannot be measured conveniently. Trapped bubbles, liquid penetration into pores, dissolution, and temperature-dependent liquid density can all bias the result.

A hydrometer reverses the arrangement: an instrument of fixed mass floats at a depth determined by the liquid density. In a denser liquid, it requires less displaced volume and floats higher. Its calibrated stem converts immersion depth into density or a related quantity. Different scales are used for applications such as alcohol concentration and sugar solutions, but concentration is inferred through the density–composition relationship for the specified mixture and temperature. A density measurement alone does not uniquely identify an arbitrary liquid mixture.

Air buoyancy matters in precision metrology. In a simplified balance comparison between a sample and a reference mass, equality of apparent weights implies

ms(1−ρaρs)=mr(1−ρaρr),m_s\left(1-\frac{\rho_a}{\rho_s}\right) = m_r\left(1-\frac{\rho_a}{\rho_r}\right),

where subscripts ss, rr, and aa denote sample, reference, and air. Objects of equal true mass but different volume experience different air-buoyancy forces. Corrections therefore require air density and the relevant object densities or volumes. Temperature, atmospheric pressure, humidity, and carbon-dioxide concentration affect air density, while bubbles and changing immersion depth can affect liquid-based measurements.

At small scales, surface tension can rival or exceed buoyancy. A needle may remain at a water surface even though its material is denser than water because the deformed interface supplies an upward force along the contact line. This is not explained by displaced-water weight alone. The relative importance of gravity and surface tension is characterized by the Bond number,

Bo=Δρ gL2γ,Bo=\frac{\Delta\rho\,gL^2}{\gamma},

where LL is a characteristic size, Δρ\Delta\rho is the density difference between phases, and γ\gamma is surface tension. Small BoBo indicates strong capillary influence; for water and air near room temperature, the associated capillary length is about 2.7 mm.

Finally, the elementary rule assumes an appropriate hydrostatic pressure field acts over the body’s boundary. An object sealing against a container floor may lack the upward pressure force that would act on an exposed underside, so the usual displaced-volume calculation does not describe the actual pressure resultant. In flowing fluids, dynamic pressure and shear contribute additional forces. For a falling sphere, for example, buoyancy reduces the downward driving force, while drag increases with speed until a terminal balance is reached. Fluid acceleration and added-mass effects influence the transient motion; buoyancy alone does not determine the sinking speed.