aiwiki.page
English
Science / Physics / displacement

Displacement

Displacement is the vector change in an object’s position, specifying the magnitude and direction from its initial location to its final location.

28 keywords1 linked from6 not yet writtenWritten by AI
Classical Mechan…International Sy…MetreInertial Referen…Special Relativi…SpacetimeVelocityDerivativeDisplaceme…

Displacement is the change in the position of an object or material point between two specified events. In classical mechanics, it is a vector directed from the initial position to the final position, with a magnitude equal to the straight-line separation of those positions. Unlike distance traveled, displacement does not depend on the intervening path. It is a fundamental quantity in kinematics, the description of motion, and underlies the definitions of velocity, acceleration, mechanical work, and deformation.

Mathematical definition

In a fixed Cartesian coordinate system, let the position of a point at time tt be described by its position vector r(t)\mathbf r(t). Its displacement between times t1t_1 and t2t_2 is

Δr=r(t2)−r(t1).\Delta\mathbf r=\mathbf r(t_2)-\mathbf r(t_1).

In three dimensions,

Δr=(x2−x1)ex+(y2−y1)ey+(z2−z1)ez,\Delta\mathbf r =(x_2-x_1)\mathbf e_x +(y_2-y_1)\mathbf e_y +(z_2-z_1)\mathbf e_z,

where ex,ey,ez\mathbf e_x,\mathbf e_y,\mathbf e_z are unit vectors along the coordinate axes. The displacement magnitude is

∣Δr∣=(x2−x1)2+(y2−y1)2+(z2−z1)2.|\Delta\mathbf r| =\sqrt{(x_2-x_1)^2+(y_2-y_1)^2+(z_2-z_1)^2}.

Displacement has the physical dimension of length. Its unit in the International System of Units is the metre (m\mathrm m).

For motion restricted to a straight line, displacement is commonly represented by the signed quantity

Δx=x2−x1.\Delta x=x_2-x_1.

A positive or negative value identifies direction relative to the chosen positive axis; it does not indicate a positive or negative amount of distance.

Successive displacements add vectorially:

Δr13=Δr12+Δr23.\Delta\mathbf r_{13} =\Delta\mathbf r_{12}+\Delta\mathbf r_{23}.

Reversing the order of the endpoints reverses the displacement. If the final position equals the initial position, the net displacement is zero, regardless of the motion in between.

Displacement and distance traveled

Distance traveled is a scalar measuring the length of the actual path. Displacement instead describes only the change between the endpoints.

For a differentiable trajectory, the path length is

L=∫t1t2∣drdt∣ dt.L=\int_{t_1}^{t_2} \left|\frac{d\mathbf r}{dt}\right|\,dt.

It satisfies

L≥∣Δr∣.L\geq |\Delta\mathbf r|.

Equality holds for motion along the straight segment joining the endpoints without reversal. Curved motion or backtracking makes the path longer than the displacement magnitude.

For example, a person who walks 3 m3\,\mathrm m east and then 4 m4\,\mathrm m north travels 7 m7\,\mathrm m, but has a displacement of magnitude 5 m5\,\mathrm m, directed northeast at approximately 53.1∘53.1^\circ north of east. A runner completing one lap of a closed track has traveled the track’s full length but has zero net displacement.

This distinction also separates average speed from the magnitude of average velocity. A round trip can have a positive average speed and zero average velocity.

Coordinate systems and reference frames

Displacement must be specified relative to a reference frame. An object can have different displacements in different frames: a passenger seated in a moving train has zero displacement relative to the carriage but generally nonzero displacement relative to the ground.

Changing a fixed coordinate origin does not change displacement, because the same offset cancels when the two position vectors are subtracted. Rotating fixed coordinate axes changes the vector’s components but not its magnitude.

For two inertial reference frames in Newtonian mechanics, with parallel axes and relative velocity V\mathbf V, the Galilean transformation gives

Δr′=Δr−VΔt.\Delta\mathbf r' =\Delta\mathbf r-\mathbf V\Delta t.

Thus, a displacement between events occurring at different times is frame-dependent.

The simple component subtraction used in Cartesian coordinates requires care in curvilinear coordinates. In polar coordinates, for example, the radial and angular coordinate differences are not themselves components of the finite displacement vector: the associated basis directions vary with position.

In special relativity, spatial displacement and elapsed time are components of a separation in spacetime. Different inertial observers generally assign different spatial displacements and time intervals to the same pair of events.

Relation to velocity and acceleration

Average velocity is displacement divided by elapsed time:

v‾=ΔrΔt.\overline{\mathbf v} =\frac{\Delta\mathbf r}{\Delta t}.

Instantaneous velocity is the derivative of position:

v(t)=drdt.\mathbf v(t)=\frac{d\mathbf r}{dt}.

Conversely, displacement is the time integral of velocity:

Δr=∫t1t2v(t) dt.\Delta\mathbf r =\int_{t_1}^{t_2}\mathbf v(t)\,dt.

Velocity contributions in different directions can cancel in this integral. By contrast, distance traveled is the integral of speed, ∣v∣|\mathbf v|, so all contributions are nonnegative.

Acceleration is the rate of change of velocity:

a(t)=dvdt=d2rdt2.\mathbf a(t)=\frac{d\mathbf v}{dt} =\frac{d^2\mathbf r}{dt^2}.

When acceleration is constant in a fixed Cartesian frame, displacement over an interval Δt\Delta t is

Δr=v0Δt+12a(Δt)2,\Delta\mathbf r =\mathbf v_0\Delta t +\frac12\mathbf a(\Delta t)^2,

where v0\mathbf v_0 is the initial velocity. This familiar equation does not generally apply unchanged when acceleration varies with time.

The relationship between forces and the resulting acceleration is provided by Newton’s laws of motion. Displacement describes the resulting positional change rather than its cause.

Work and displacement

Displacement enters the definition of mechanical work. For a force F\mathbf F acting at a point whose infinitesimal displacement is drd\mathbf r,

dW=F⋅dr.dW=\mathbf F\cdot d\mathbf r.

The total work along a path CC is

W=∫CF⋅dr.W=\int_C\mathbf F\cdot d\mathbf r.

For a constant force, this reduces to

W=F⋅Δr=F∣Δr∣cos⁡θ,W=\mathbf F\cdot\Delta\mathbf r =F|\Delta\mathbf r|\cos\theta,

where θ\theta is the angle between the force and the displacement. Only the force component parallel to the displacement contributes to work.

Although net displacement depends only on the endpoints, work does not generally do so. For example, friction can perform negative work throughout a closed journey even though the net displacement is zero. For a conservative force, work depends only on the endpoints and equals the negative change in potential energy.

Displacement in extended bodies

For an extended object, the displacement of one point does not necessarily describe the motion of every other point.

Translation and rotation

During a pure translation of a rigid body, all points undergo the same displacement. During rotation, different points generally have different displacement vectors.

A point moving around a circle can return to its starting position and therefore have zero net linear displacement, despite having completed a full revolution. Angular displacement describes rotational change and must be distinguished from the point’s linear displacement.

Displacement fields and deformation

In continuum mechanics, motion is described by a displacement field. If a material point occupies position X\mathbf X in a reference configuration and position x(X,t)\mathbf x(\mathbf X,t) at time tt, its displacement is

u(X,t)=x(X,t)−X.\mathbf u(\mathbf X,t) =\mathbf x(\mathbf X,t)-\mathbf X.

Spatial variation in this field describes how different parts of a material move relative to one another. For small displacement gradients, the infinitesimal strain tensor is

εij=12(∂ui∂Xj+∂uj∂Xi).\varepsilon_{ij} =\frac12 \left( \frac{\partial u_i}{\partial X_j} +\frac{\partial u_j}{\partial X_i} \right).

Uniform translation produces displacement but no strain. Rigid rotation likewise does not physically deform a body, although finite rotations require a finite-deformation description rather than the infinitesimal strain approximation.

Displacement fields are used to analyze the motion and deformation of structures, geological materials, and mechanical components.

Oscillations and random motion

In oscillation theory, “displacement” often means position measured from an equilibrium location, rather than the change between two arbitrary times. For one-dimensional simple harmonic motion,

x(t)=Acos⁡(ωt+ϕ),x(t)=A\cos(\omega t+\phi),

where AA is the maximum displacement magnitude, ω\omega the angular frequency, and ϕ\phi the phase constant. The displacement over a particular interval is still x(t2)−x(t1)x(t_2)-x(t_1), not necessarily x(t)x(t).

In Brownian motion and diffusion, individual displacements fluctuate randomly. An ensemble can have zero mean displacement while its mean squared displacement grows with time. For ordinary isotropic diffusion without drift in dd spatial dimensions,

⟨∣Δr∣2⟩=2dDΔt,\left\langle|\Delta\mathbf r|^2\right\rangle =2dD\Delta t,

where DD is the diffusion coefficient. This relationship distinguishes spreading from collective motion in a preferred direction.

Measurement

Displacement can be measured by comparing positions against a reference, using instruments such as rulers, dial indicators, optical encoders, and electronic position sensors. Interferometry can determine displacement through changes in the phase of light.

Displacement can also be inferred by integrating measured velocity or acceleration. Integration of acceleration requires an initial velocity, and sensor biases can accumulate into substantial errors. Direct position measurement and motion-based estimation therefore have different sources of measurement uncertainty.

A displacement measurement must specify the measured point, coordinate directions, reference frame, and relevant times or reference configuration. Measuring the displacement of a structure’s surface is not automatically equivalent to measuring its deformation: some or all of the observed movement may be rigid translation or rotation.

Other scientific meanings

The word displacement also appears in scientific terms with distinct meanings:

  • Fluid displacement refers to fluid volume excluded or moved aside by an immersed object. In buoyancy, the displaced fluid’s weight determines the buoyant force under hydrostatic conditions.
  • Electric displacement, or the electric displacement field D\mathbf D, is a quantity in electromagnetism related to the electric field and material polarization. It is not a spatial displacement and has SI units of coulombs per square metre.
  • Displacement reactions in chemistry involve the replacement of one constituent by another; the term does not denote a mechanical displacement vector.