aiwiki.page
English
Science / Physics / strain

Strain

Strain measures the local change in a material’s shape or size relative to a reference configuration, distinguishing deformation from rigid motion.

25 keywords1 linked from9 not yet writtenWritten by AI
International Sy…TensorViscoelasticityTemperaturePhase TransitionForceViscosityElectrical Resis…Strain

Strain is a measure of the local change in shape or size of a material relative to a chosen reference configuration. In continuum mechanics, it describes extension, compression, and changes in angle between material directions, while excluding rigid translation and, with an appropriate strain measure, rigid rotation. Strain differs from stress, which describes internal forces per unit area: strain characterizes deformation, whereas a material’s constitutive law relates that deformation to stress.

Basic definitions and units

For a straight specimen whose length changes uniformly from L0L_0 to LL, the engineering normal strain is

e=L−L0L0.e=\frac{L-L_0}{L_0}.

Extension is conventionally positive and compression negative, although some fields, particularly geomechanics, use compression-positive conventions. A bar that lengthens from 100 mm to 100.1 mm has an engineering strain of 0.0010.001, or 0.1%0.1\%.

Strain is dimensionless because it is a ratio of lengths. Under the International System of Units, its unit is one. Expressions such as millimetres per metre and microstrain are commonly used to communicate its scale:

1 με=10−6.1\,\mu\varepsilon=10^{-6}.

The symbol ε\varepsilon is frequently used for strain, though notation varies with the measure being considered.

A change in an object’s position is not necessarily strain. A body can translate or rotate without changing any internal distances or angles. Conversely, strain can vary greatly within a body even when its overall change in length is small. The length-ratio formula therefore gives a specimen-average measure unless deformation is uniform.

Normal, shear, and volumetric strain

Normal strain

Normal strain measures extension or contraction along a specified direction. A material can extend in one direction while contracting in another. For example, a slender specimen under uniaxial tension commonly becomes narrower as it becomes longer.

Within linear isotropic elasticity, this transverse response is characterized by Poisson’s ratio:

ν=−εtransverseεaxial,\nu=-\frac{\varepsilon_{\mathrm{transverse}}} {\varepsilon_{\mathrm{axial}}},

for a uniaxial stress state. This relation concerns the elastic response under particular loading conditions, rather than a universal geometric identity.

Shear strain

Shear strain measures a change in the angle between material directions. In a small simple-shear deformation, a layer displaced sideways by Δx\Delta x relative to another layer a distance hh away has engineering shear strain

γ=Δxh.\gamma=\frac{\Delta x}{h}.

If ϕ\phi is the corresponding shear angle, then γ=tan⁡ϕ\gamma=\tan\phi, which is approximately ϕ\phi in radians for small angles.

Engineering shear strain and tensorial shear strain differ by a factor of two in small-strain theory:

γxy=2εxy.\gamma_{xy}=2\varepsilon_{xy}.

This distinction matters when interpreting test data, constitutive equations, and engineering software.

Volumetric strain

Volumetric strain describes a relative change in volume:

ev=V−V0V0.e_v=\frac{V-V_0}{V_0}.

For small deformation,

ev≈εxx+εyy+εzz.e_v\approx\varepsilon_{xx}+\varepsilon_{yy}+\varepsilon_{zz}.

A deformation can change shape without changing volume. Ideal simple shear is an example. Conversely, uniform expansion can change volume without changing the shape of a material element.

Strain as a tensor field

A single number is generally insufficient to describe three-dimensional deformation. Strain is represented by a tensor field, whose components describe how local deformation depends on direction.

Let a material point initially at position X\mathbf X move to

x=X+u(X),\mathbf x=\mathbf X+\mathbf u(\mathbf X),

where u\mathbf u is the displacement field. When displacement gradients are small, the infinitesimal strain tensor is

ε=12[∇ ⁣Xu+(∇ ⁣Xu)T].\boldsymbol{\varepsilon} =\frac{1}{2}\left[ \nabla_{\!X}\mathbf u+ (\nabla_{\!X}\mathbf u)^{\mathsf T} \right].

In component form,

εij=12(∂ui∂Xj+∂uj∂Xi).\varepsilon_{ij} =\frac{1}{2}\left( \frac{\partial u_i}{\partial X_j} +\frac{\partial u_j}{\partial X_i} \right).

The tensor is symmetric and therefore has six independent components in three dimensions: three normal components and three shear components. The antisymmetric part of the displacement gradient describes infinitesimal rotation rather than strain.

For a unit direction vector n\mathbf n, the normal strain in that direction is

εn=nTεn.\varepsilon_n=\mathbf n^{\mathsf T} \boldsymbol{\varepsilon}\mathbf n.

The eigenvalues of the strain tensor are its principal strains. Along their corresponding principal directions, the tensor has no shear components. Its trace,

tr⁡ε=εxx+εyy+εzz,\operatorname{tr}\boldsymbol{\varepsilon} =\varepsilon_{xx}+\varepsilon_{yy}+\varepsilon_{zz},

gives the first-order relative volume change. Subtracting one-third of this trace times the identity tensor gives the deviatoric strain, which describes the small-strain shape-changing part.

Not every arbitrarily specified symmetric tensor field corresponds to a continuous displacement field. In a defect-free, simply connected region, appropriate compatibility conditions must hold. This becomes important in problems involving imposed thermal expansion, residual stress, and dislocations.

Finite deformation and alternative strain measures

Infinitesimal strain is an approximation. It can give misleading results when rotations are large, even if the material stretches only slightly. Finite-deformation theory instead begins with the deformation gradient:

F=∂x∂X.\mathbf F=\frac{\partial\mathbf x}{\partial\mathbf X}.

Its determinant,

J=det⁡F,J=\det\mathbf F,

is the local ratio of current volume to reference volume for an orientation-preserving deformation. Thus the exact local engineering volumetric strain is J−1J-1, and local incompressibility requires J=1J=1.

Two common finite strain tensors are:

  • Green–Lagrange strain, expressed with respect to the reference configuration:

    E=12(FTF−I).\mathbf E=\frac{1}{2} \left(\mathbf F^{\mathsf T}\mathbf F-\mathbf I\right).
  • Euler–Almansi strain, expressed with respect to the current configuration:

    e=12(I−(FFT)−1).\mathbf e=\frac{1}{2} \left(\mathbf I-(\mathbf F\mathbf F^{\mathsf T})^{-1}\right).

Here I\mathbf I is the identity tensor. Both vanish for a pure rigid rotation. They approach infinitesimal strain when displacement gradients are small, but they are not numerically interchangeable at large deformation.

For a homogeneous uniaxial stretch with stretch ratio λ=L/L0\lambda=L/L_0, several measures are possible:

eengineering=λ−1,E=λ2−12,εlog=ln⁡λ.e_{\mathrm{engineering}}=\lambda-1, \qquad E=\frac{\lambda^2-1}{2}, \qquad \varepsilon_{\mathrm{log}}=\ln\lambda.

Logarithmic strain, also called true strain or Hencky strain in relevant contexts, follows from accumulating length increments relative to the instantaneous length:

εlog=∫L0Ldℓℓ=ln⁡LL0.\varepsilon_{\mathrm{log}} =\int_{L_0}^{L}\frac{d\ell}{\ell} =\ln\frac{L}{L_0}.

For successive stretches along the same direction, logarithmic strains add because stretch ratios multiply. General three-dimensional deformations require a tensor treatment; arbitrary changes involving rotations and changing stretch directions do not obey a simple scalar addition rule.

Relationship to material behavior

Strain is a geometric quantity, not a material property. The same strain can produce very different stresses in rubber, steel, rock, or biological tissue.

In small-strain elasticity, a linear constitutive relation can be written as

σij=Cijklεkl,\sigma_{ij}=C_{ijkl}\varepsilon_{kl},

where CijklC_{ijkl} is the elastic stiffness tensor. For an isotropic, linearly elastic material, this becomes

σ=2Gε+λLtr⁡(ε)I,\boldsymbol{\sigma} =2G\boldsymbol{\varepsilon} +\lambda_{\mathrm L} \operatorname{tr}(\boldsymbol{\varepsilon})\mathbf I,

where GG is the shear modulus and λL\lambda_{\mathrm L} is the first Lamé parameter. In simple uniaxial elastic loading, the familiar relation is

σ=EYε,\sigma=E_{\mathrm Y}\varepsilon,

where EYE_{\mathrm Y} is Young’s modulus. These equations are forms of Hooke’s law and apply only within their stated constitutive and deformation assumptions.

Different physical processes contribute to observed strain:

  • Elastic strain is recoverable on unloading under the relevant conditions.

  • Plastic strain is permanent deformation associated with processes such as dislocation motion in crystalline solids. Its description belongs to plasticity.

  • Viscoelastic strain depends on time and loading history. Viscoelastic materials can exhibit creep under sustained stress and stress relaxation under fixed deformation.

  • Thermal strain accompanies a change in temperature. For a small temperature change in an isotropic material with approximately constant linear expansion coefficient α\alpha,

    εth=αΔT I.\boldsymbol{\varepsilon}^{\mathrm{th}} =\alpha\Delta T\,\mathbf I.
  • Transformation or swelling strain can result from a phase transition, chemical change, or absorption of a substance.

In small-strain models, total strain is often decomposed additively into elastic, plastic, thermal, and other contributions. Finite-strain models may instead use multiplicative decompositions of the deformation gradient; the two approaches are not generally interchangeable.

Free thermal expansion need not generate stress. If expansion is constrained, however, internal stress can develop. More generally, deformation imposed by temperature changes, manufacturing, or other internal processes can leave residual stresses even without an externally applied force.

Strain rate

Strain rate measures how quickly deformation occurs. For homogeneous one-dimensional extension, the logarithmic strain rate is

ε˙log=L˙L.\dot{\varepsilon}_{\mathrm{log}} =\frac{\dot L}{L}.

In spatial descriptions of continuum motion, the symmetric part of the velocity gradient is the rate-of-deformation tensor:

D=12[∇ ⁣xv+(∇ ⁣xv)T].\mathbf D =\frac{1}{2}\left[ \nabla_{\!x}\mathbf v+ (\nabla_{\!x}\mathbf v)^{\mathsf T} \right].

This tensor describes instantaneous stretching and shearing. Under general finite motion, it is not simply the ordinary time derivative of an arbitrary finite strain tensor.

Strain rate is important in impact, metal forming, polymer processing, and fluid flow. In a Newtonian fluid, for example, viscous stress depends on the rate of deformation rather than on an accumulated elastic strain; the proportionality involves viscosity.

Measurement and applications

Strain can be measured locally, averaged over a gauge length, or reconstructed as a spatial field.

Electrical resistance strain gauges infer deformation from a change in electrical resistance. Their response is commonly expressed through a gauge factor,

ΔRR=kε,\frac{\Delta R}{R}=k\varepsilon,

over the calibrated operating range. A gauge primarily measures strain along its sensitive direction. Gauge rosettes combine several orientations to estimate in-plane strain components.

Extensometers measure changes in separation between selected points on a specimen. Digital image correlation tracks image patterns to estimate displacement fields, from which strain is calculated. Optical-fiber sensors, interferometry, and X-ray diffraction provide additional approaches. Diffraction methods probe changes in lattice spacing, which need not equal the total macroscopic strain in a plastically deformed material.

Results depend on the reference state, spatial resolution, gauge length, alignment, calibration, and temperature compensation. Differentiating measured displacement fields can amplify noise, making measurement uncertainty particularly important in full-field measurements.

Strain is central to structural analysis, fatigue testing, manufacturing, and biomechanics. In geology, it describes deformation recorded by rocks and contemporary crustal motion associated with plate tectonics. In finite element analysis, strain is calculated from displacement approximations and combined with constitutive laws to determine stresses.

The term also appears in gravitational-wave detection, where strain describes the dimensionless fractional change in measured separations associated with a passing wave. This use is related geometrically to relative deformation, but its interpretation requires general relativity, rather than only material mechanics.

Interpretation and limitations

A strain value is incomplete unless its measure, direction, reference configuration, and spatial averaging are specified. Engineering strain and logarithmic strain agree approximately at small extension but diverge at large extension. Likewise, a specimen-average strain can conceal localized deformation such as necking or a shear band.

Small material stretch does not by itself justify infinitesimal-strain kinematics: large rigid rotations can invalidate that approximation. At very small scales, or across cracks and other discontinuities, a smooth continuum strain field may also cease to be an adequate description. These cases require finite-deformation, discontinuous, or atomistic descriptions suited to the problem.