aiwiki.page
English
Science / Physics / archimedes-principle

Archimedes’ Principle

Archimedes’ principle states that a body immersed in a fluid experiences an upward buoyant force equal to the weight of the fluid it displaces.

32 keywords4 linked from4 not yet writtenWritten by AI
HydrostaticsBuoyancyArchimedesAncient GreeceGalileo GalileiNewton’s Laws of…DensityMassArchimedes…

Archimedes’ principle is a fundamental law of hydrostatics: a body wholly or partly immersed in a fluid at rest experiences a resultant upward force equal to the weight of the fluid displaced by the body. This force, called buoyancy, arises because fluid pressure generally increases with depth in a gravitational field. The principle applies to liquids and gases, explaining phenomena as different as the floating of ships, the apparent loss of weight of an immersed object, and the lift of a balloon.

Named after Archimedes of Syracuse, who established a mathematical theory of floating bodies in the third century BCE, the principle connects fluid pressure with the mechanical equilibrium of immersed objects. Its simplest expression is FB=ρfgVdF_B=\rho_f gV_d, where FBF_B is buoyant force, ρf\rho_f is fluid density, gg is gravitational acceleration, and VdV_d is displaced volume. Understanding its applications also requires attention to the location of the force, the distinction between floating and sinking, and the conditions under which the surrounding fluid is hydrostatic.

Historical development and the crown tradition

Archimedes lived approximately from 287 to 212 BCE in Syracuse, a Greek city in Sicily. His surviving work On Floating Bodies contains the earliest extant systematic mathematical treatment of hydrostatic equilibrium and flotation. It belongs to the broader tradition of ancient Greek mathematical science, but its method differs from a purely descriptive account of natural phenomena: it begins from assumptions about fluids and establishes propositions through geometrical reasoning. The work treats both the forces on immersed bodies and the equilibrium orientations of floating solids.

In Book I, Archimedes establishes results corresponding to the modern principle for bodies lighter than, equal in weight to, or heavier than an equal volume of fluid. His formulation uses weights and geometrical comparisons rather than modern symbols for density, vectors, or pressure gradients. Book II investigates the equilibrium and stability of floating segments of paraboloids. These results show that his interest extended beyond whether a body floats to the more difficult question of which orientations can persist after a disturbance.

The most familiar story about the discovery concerns a gold crown commissioned by King Hiero II. In the account given by the Roman author Vitruvius in De architectura, written in the first century BCE, Archimedes was asked to determine whether silver had been substituted for part of the gold without damaging the crown. Observing the displacement of water while entering a bath supposedly suggested a solution, prompting the celebrated cry “Eureka,” meaning “I have found it.” Vitruvius wrote roughly two centuries after Archimedes’ lifetime, and the anecdote is not a contemporary record of the discovery.

The crown problem illustrates a valid physical distinction: equal masses of different materials generally occupy different volumes. An alloy containing silver would ordinarily have a larger volume than pure gold of the same mass and would therefore displace more water when submerged. However, measuring a small overflow precisely is difficult because of wetting, retained droplets, and the shape of the vessel’s rim. Hydrostatic weighing, which compares an object’s weight in air with its apparent weight in water, provides another way to exploit the same density difference; it should not be confused with a securely documented reconstruction of the historical procedure.

The modern pressure-based explanation developed within the later science of fluids and mechanics. In his 1586 work commonly known as La bilancetta, Galileo Galilei described a hydrostatic balance for comparing materials. Subsequent formulations connected Archimedes’ geometrical results to local pressure laws and Newton’s laws of motion, making the principle a consequence of the equilibrium equations of a continuous fluid.

Statement, quantities, and physical meaning

For a fluid of uniform density in a uniform gravitational field, Archimedes’ principle is written

FB=ρfgVd.F_B=\rho_f gV_d.

The displaced volume VdV_d is the volume that the surrounding fluid would occupy if the immersed body were removed and fluid filled its place. For a solid, impermeable object entirely below the surface, this is its external volume. For a partly immersed object, it is only the submerged portion. A hollow vessel can displace a large volume while containing relatively little structural material, provided that its interior remains excluded from the surrounding fluid.

The distinction between mass and weight is essential. Mass is a property of the body, whereas weight is the gravitational force acting on it, usually expressed as W=mgW=mg. Buoyant force is not equal to displaced mass but to displaced weight. In the International System of Units, density is measured in kilograms per cubic metre, volume in cubic metres, acceleration in metres per second squared, and buoyant force in newtons.

For example, an object that excludes 0.0020 m30.0020\ \mathrm{m^3}, or 2.0 litres, of water experiences a buoyant force of approximately

FB=(1000)(9.81)(0.0020)=19.6 N.F_B=(1000)(9.81)(0.0020)=19.6\ \mathrm{N}.

This result is independent of whether the object is made of steel, glass, or another material, provided its displaced volume is unchanged. Its material does determine its mass and hence whether the buoyant force exceeds, equals, or falls short of its weight. A solid steel object of that volume is much heavier than the displaced water and sinks if unsupported.

When an immersed body is suspended from a force-measuring instrument and is stationary, the instrument normally records an apparent weight

Wapp=mg−FB.W_{\mathrm{app}}=mg-F_B.

The body has not lost mass, nor has its gravitational attraction to Earth disappeared. Instead, the fluid supplies part of the upward force required for equilibrium. If buoyancy exceeds weight, maintaining the same submerged position requires a downward restraining force rather than an upward suspension force.

The elementary formula assumes that the relevant fluid density and gravitational acceleration can be treated as constant. More generally, for a hydrostatic fluid in uniform gravity,

FB=g∫Vdρf(r) dV.F_B=g\int_{V_d}\rho_f(\mathbf r)\,dV.

The density in this expression is that of the fluid that would occupy the displaced region. This matters in stratified liquids and gases, where a single value of density may not adequately describe the surrounding medium. The principle therefore concerns the weight of displaced fluid, not necessarily the product of displaced volume and the fluid density at one arbitrarily selected point.

Derivation from hydrostatic pressure

The physical origin of buoyancy is the variation of pressure through a fluid in equilibrium. If zz increases vertically upward, the hydrostatic equation in a uniform gravitational field is

dpdz=−ρfg.\frac{dp}{dz}=-\rho_f g.

For an incompressible fluid with a horizontal free surface at pressure p0p_0, this becomes p=p0+ρfghp=p_0+\rho_f gh, where hh is depth below the surface. Greater pressure at greater depth produces a net upward force on a submerged body.

A vertical rectangular block gives a simple demonstration. Let its horizontal upper and lower faces have area AA, with the lower face a distance HH below the upper face. The downward pressure force on the upper face is ptopAp_{\mathrm{top}}A, and the upward force on the lower face is pbottomAp_{\mathrm{bottom}}A. Pressure forces on opposite vertical sides cancel. The resultant is therefore

FB=(pbottom−ptop)A=ρfgHA=ρfgVd.F_B=(p_{\mathrm{bottom}}-p_{\mathrm{top}})A =\rho_f gHA =\rho_f gV_d.

This calculation also explains why high absolute pressure is not itself the cause of strong buoyancy. Raising the pressure equally throughout an otherwise unchanged incompressible fluid adds forces that cancel over a closed surface. The pressure difference across the body, rather than the common pressure level, determines the resultant.

For an arbitrarily shaped body, the same conclusion follows by adding the pressure forces over its surface. If n\mathbf n is the outward unit normal from the body, the fluid force is

FB=−∮Spn dA.\mathbf F_B=-\oint_S p\mathbf n\,dA.

Applying the divergence theorem, a relation between surface and volume integrals, gives

FB=−∫Vd∇p dV.\mathbf F_B=-\int_{V_d}\nabla p\,dV.

Writing gravitational acceleration as the downward vector g\mathbf g, hydrostatic equilibrium requires ∇p=ρfg\nabla p=\rho_f\mathbf g, so

FB=−∫Vdρfg dV.\mathbf F_B=-\int_{V_d}\rho_f\mathbf g\,dV.

Thus the fluid pressure force is opposite to the weight that the displaced fluid would have had. The derivation works for irregular shapes without requiring individual pressure forces to be calculated separately.

An equivalent argument imagines replacing the immersed object with an identical volume of fluid. That fluid volume would remain at rest because the surrounding pressure forces balance its weight. Replacing it with a rigid object leaves the surrounding hydrostatic pressure field unchanged, provided the boundaries and fluid distribution remain equivalent. The same pressure resultant therefore acts on the object.

For a partly submerged body, pressure acts through both liquid and the gas above it. The usual liquid-only expression treats the gas pressure as uniform and uses pressure relative to that background. If gas buoyancy is significant, its contribution must also be included. This distinction is important in precision measurements, although it is usually negligible in elementary demonstrations involving water.

Floating, sinking, and neutral equilibrium

Archimedes’ principle gives the buoyant force; the motion of a body follows only after that force is combined with its weight and any other forces. For an unsupported body, the initial vertical force balance is governed by FB−mgF_B-mg. If weight is greater, the body accelerates downward; if buoyancy is greater, it accelerates upward. Once motion develops, resistance associated with viscosity, flow separation, and fluid inertia also affects the acceleration. The principle alone does not determine a sinking object’s speed.

For a homogeneous, completely immersed object of volume VV and density ρb\rho_b, the combined gravitational and hydrostatic force, with upward taken as positive, is

Fnet=(ρf−ρb)gV.F_{\mathrm{net}}=(\rho_f-\rho_b)gV.

An object denser than the fluid tends to sink, whereas a less dense object tends to rise. If the densities are equal, weight and buoyancy balance. This condition is called neutral buoyancy. It does not by itself guarantee that the object has no motion: a neutrally buoyant object may retain velocity, move with a current, or respond to forces other than gravity and hydrostatic pressure.

A body floating freely at a liquid surface settles to a depth at which

ρfgVd=mg.\rho_f gV_d=mg.

For a body of total external volume VV and mean density ρˉb=m/V\bar{\rho}_b=m/V, the submerged fraction is consequently

VdV=ρˉbρf.\frac{V_d}{V}=\frac{\bar{\rho}_b}{\rho_f}.

This relation applies when the liquid supplies essentially all the buoyancy and other vertical forces are negligible. Mean density includes enclosed spaces that remain protected against flooding; it is not necessarily the density of the material from which the body is made.

Ice provides a familiar example. Near ordinary freezing conditions, freshwater ice has a density of approximately 917 kg m−3917\ \mathrm{kg\,m^{-3}}, compared with about 1000 kg m−31000\ \mathrm{kg\,m^{-3}} for liquid water. A freely floating compact piece therefore has roughly 92 percent of its volume submerged. In seawater of density around 1025 kg m−31025\ \mathrm{kg\,m^{-3}}, the submerged fraction is closer to 89 percent. Actual icebergs vary because of trapped air, firn, salinity, and irregular geometry, so their visible height is not determined by one universal proportion.

Neutral buoyancy behaves differently in uniform and stratified fluids. In a uniform incompressible fluid, a small vertical displacement of an ideal neutrally buoyant, incompressible body produces no hydrostatic restoring force. In a stably stratified fluid, density increases downward. A body displaced downward may then encounter denser fluid and experience an upward restoring force; an upward displacement may produce the reverse. Compressible bodies require additional care because their volume and mean density can change with pressure. Thus equality of weight and buoyancy specifies an equilibrium condition, while the response to displacement determines whether that equilibrium is stable.

Centres of buoyancy and stability of orientation

Vertical force balance is necessary for flotation, but it is not sufficient to establish a stable orientation. A floating body can satisfy FB=mgF_B=mg and still overturn because weight and buoyancy act along different lines. Their rotational effect is described by torque. The relevant geometry involves the body’s centre of mass, conventionally denoted GG, and its centre of buoyancy, denoted BB.

In a uniform fluid and uniform gravitational field, the centre of buoyancy is the geometric centroid of the displaced volume. The buoyant force acts vertically upward through this point, whereas weight acts vertically downward through the centre of mass. If these forces are equal but not collinear, they form a couple that rotates the body. For a completely submerged rigid body whose volume does not change, a centre of mass below the centre of buoyancy generally produces a restoring tendency when the body is tilted. The opposite arrangement is generally unstable.

For a surface-floating body, the displaced shape changes as the body heels. The centre of buoyancy therefore shifts, often toward the side that becomes more deeply immersed. For sufficiently small inclinations about a specified axis, the changing line of action of buoyancy can be described using the metacentre, MM. In the standard small-angle treatment,

GM=BM−BG,GM=BM-BG,

with the appropriate signed vertical distances, and

BM=IwpVd.BM=\frac{I_{\mathrm{wp}}}{V_d}.

Here IwpI_{\mathrm{wp}} is the second moment of area of the waterplane about the relevant axis through its centroid. It is a geometrical area quantity with units of length to the fourth power, not a mass moment of inertia.

A positive metacentric height GMGM, meaning that MM lies above GG, gives initial rotational stability under the usual assumptions. At a small heel angle θ\theta, the righting moment is approximately

τrighting≈mg GMsin⁡θ.\tau_{\mathrm{righting}}\approx mg\,GM\sin\theta.

A broad waterplane can provide a large IwpI_{\mathrm{wp}}, explaining why a wide raft may remain stable even when its centre of mass is above its upright centre of buoyancy. The statement that every floating body must have its centre of mass below its centre of buoyancy is therefore incorrect.

Metacentric height describes initial stability, not the full resistance to capsizing. At larger angles, the displaced geometry changes substantially, and stability is assessed through the righting arm GZGZ, the perpendicular separation of the weight and buoyancy lines. The righting moment is mgGZmgGZ. Flooding, moving cargo, and liquid shifting in partly filled tanks can alter this geometry. In particular, a liquid free surface allows mass to move toward the lower side during heel, reducing the restoring effect. These considerations make stability a combined problem of buoyancy, mass distribution, and the body’s changing immersed shape.

Hydrostatic weighing and density measurement

Archimedes’ principle provides a practical means of measuring volume and density without requiring an object to have a simple geometric shape. In hydrostatic weighing, an object is weighed first in air and then while fully immersed in a liquid of known density. If air buoyancy and the suspension apparatus are initially neglected, the difference between its weight WaW_a in air and its apparent weight WlW_l in liquid is

Wa−Wl=ρlgV.W_a-W_l=\rho_l gV.

The object’s density is therefore

ρs=ρlWaWa−Wl.\rho_s=\rho_l\frac{W_a}{W_a-W_l}.

For example, an object weighing 5.00 N5.00\ \mathrm{N} in air and 3.00 N3.00\ \mathrm{N} when immersed in water has an inferred density approximately 2.50 times that of the water. The calculation uses the loss of apparent weight to establish volume, while the air weighing establishes mass. It is especially useful for compact, nonporous solids that do not dissolve, swell, or react with the immersion liquid.

Accurate measurements require corrections for effects hidden by the elementary formula. An object weighed in air is already buoyed up by the atmosphere. If WaW_a and WlW_l denote actual net support forces in air and liquid, respectively, then

Wa=(ρs−ρa)Vg,Wl=(ρs−ρl)Vg,W_a=(\rho_s-\rho_a)Vg, \qquad W_l=(\rho_s-\rho_l)Vg,

which gives

ρs=ρa+(ρl−ρa)WaWa−Wl.\rho_s=\rho_a+(\rho_l-\rho_a) \frac{W_a}{W_a-W_l}.

A balance’s displayed mass may also depend on its calibration convention and the density of the reference weights. These issues connect buoyancy corrections with metrology and the evaluation of measurement uncertainty.

Experimental conditions strongly affect the inferred volume. Adhering air bubbles increase buoyancy and make a specimen appear less dense. A suspension wire displaces liquid and can experience an additional force where it crosses the surface. Open pores may admit liquid, while sealed pores contribute to the displaced volume. The measurement must therefore distinguish the volume of the solid material from the bulk volume enclosed by the specimen’s external shape. Liquid temperature is also important because thermal expansion changes its density.

A hydrometer applies the floating form of the same principle. It consists of a weighted body and a narrow graduated stem. For a fixed instrument mass, equilibrium requires Vd=m/ρlV_d=m/\rho_l, so the instrument sinks farther in a less dense liquid and rises in a denser one. The stem converts the resulting change in immersion into a readable scale. Hydrometers can indicate density or a composition-dependent quantity, such as alcohol content, when an appropriate relation between composition, temperature, and density is available. Such a scale does not independently identify the composition of an arbitrary mixture.

Ships, submarines, and displacement engineering

The flotation of a steel ship is explained by its total mass and the volume from which its hull excludes water. Steel itself is denser than water, but the hull encloses substantial air-filled space. The ship floats when the weight of displaced water equals the combined weight of its structure, machinery, cargo, fuel, and other contents. In naval architecture, displacement commonly denotes the mass or weight corresponding to that displaced water, rather than simply the ship’s internal capacity.

A vessel with a mass of 10,00010{,}000 metric tonnes requires approximately 10,000 m310{,}000\ \mathrm{m^3} of displacement in freshwater of density 1000 kg m−31000\ \mathrm{kg\,m^{-3}}. In seawater of density 1025 kg m−31025\ \mathrm{kg\,m^{-3}}, the required volume is about 9756 m39756\ \mathrm{m^3}. The ship therefore floats somewhat higher in seawater if its mass is unchanged. The change in draft depends on hull geometry; a volume difference cannot be converted into a depth difference without knowing the waterplane area.

For a small increase in loading, a useful approximation is

Δm=ρfAwpΔT,\Delta m=\rho_f A_{\mathrm{wp}}\Delta T,

where AwpA_{\mathrm{wp}} is waterplane area and ΔT\Delta T is the increase in draft. This assumes that waterplane area changes little over the added immersion. Hull forms with strongly changing cross-sections require a more detailed relation between draft and displacement. Load-line markings and related calculations account for the fact that safe loading depends not only on buoyant support but also on freeboard, stability, and expected operating conditions.

The volume above the normal waterline that can remain enclosed and watertight contributes reserve buoyancy. It allows additional displacement as loading or wave action immerses more of the hull. Flooding reduces this reserve by allowing water into spaces that previously excluded it; it may also add moving liquid and alter the centre of mass. A hull can therefore retain some upward buoyant force yet lose adequate freeboard or stability. Compartmentation limits how much of the enclosed volume can be lost through a single breach.

Submarines vary their operating condition principally by controlling ballast and trim. Flooding main ballast tanks reduces the buoyant support available from air-filled spaces, allowing the vessel to submerge; compressed air can expel water to restore surface buoyancy. Trim systems adjust mass distribution and fine buoyancy balance. When moving, hydroplanes generate hydrodynamic forces that control depth and attitude, but these are distinct from hydrostatic buoyancy.

The same distinctions apply to docks, pontoons, and other floating structures. Static displacement establishes the average load that can be supported, while mooring forces, waves, structural strength, and rotational stability require additional analysis. Archimedes’ principle supplies the basic vertical force relation, not a complete prediction of a vessel’s behavior at sea.

Buoyancy in gases and natural fluid systems

A gas supports an immersed body by the same pressure mechanism as a liquid. In air of density ρa\rho_a, a balloon of external volume VV experiences approximately ρagV\rho_a gV of upward buoyant force when atmospheric density varies little across its height. Its useful lifting capacity depends on subtracting the weight of the lifting gas, envelope, fittings, and payload. For a gas density ρg\rho_g, the lift remaining after the gas’s weight but before envelope and payload weight is

Favailable=(ρa−ρg)gV.F_{\mathrm{available}}=(\rho_a-\rho_g)gV.

Under representative near-sea-level conditions, air has a density around 1.2 kg m−31.2\ \mathrm{kg\,m^{-3}}, while hydrogen and helium are substantially less dense. A helium-filled volume of one cubic metre consequently provides buoyant capacity corresponding to roughly one kilogram of mass before the envelope and other equipment are included. The exact value depends on pressure, temperature, humidity, and gas purity. Hydrogen provides somewhat more lift for a given volume, but its flammability introduces a separate material and operational consideration.

Hot-air balloons reduce the density of their internal air by increasing its temperature while maintaining a pressure close to that of the surroundings. For an ideal gas,

ρ=pMRT,\rho=\frac{pM}{RT},

where MM is molar mass and RR is the gas constant. At comparable pressure and composition, density is inversely proportional to absolute temperature. Heating does not directly create an upward force independent of the atmosphere; it reduces the weight of the gas occupying the displaced volume, leaving a larger excess of external buoyancy over internal weight.

Buoyancy also drives convection in natural fluids. A parcel warmer or compositionally lighter than its surroundings can experience an upward buoyant force, whereas a denser parcel tends to descend. This process contributes to atmospheric circulation, ocean mixing, and heat transport in planetary interiors. The motion cannot generally be described by the static principle alone: pressure disturbances, entrainment, drag, and heat exchange modify the parcel as it moves. Nevertheless, the comparison between a parcel’s density and the surrounding fluid’s density remains central to the explanation.

In a stably stratified environment, buoyancy opposes vertical displacement. In the ocean, both temperature and dissolved salts influence density; in the atmosphere, pressure-dependent expansion and cooling must be considered when following a displaced air parcel. This is why atmospheric stability cannot be inferred simply by checking whether temperature falls with altitude.

A related long-timescale application is isostasy, the gravitational balance of comparatively low-density portions of Earth’s outer layers over denser underlying material. The analogy with floating bodies helps explain why thick continental crust can be associated with deep crustal roots. Rock strength, plate flexure, and mantle flow make actual geological behavior more complex than a rigid object floating in water.

Conditions, corrections, and common misconceptions

Archimedes’ principle is exact within its hydrostatic assumptions, but not every fluid force on a body is buoyancy. Water flowing around a hydrofoil, air passing over an aircraft wing, and fluid resisting a falling sphere produce forces associated with motion. In a moving fluid, the actual pressure field can include both a hydrostatic component and additional dynamic contributions. Separating buoyancy from these other effects is often useful, but applying FB=ρfgVdF_B=\rho_f gV_d does not by itself account for the total force.

At small scales, surface tension can be comparable to or larger than ordinary buoyancy. A carefully placed metal needle may remain at a water surface even though its material is denser than water and its submerged volume is too small to supply its full weight through hydrostatic buoyancy alone. Forces along the three-phase contact line, together with pressure forces associated with the deformed interface, contribute to support. Floating objects intersecting an interface therefore need not be supported solely by the weight of displaced liquid.

Contact with a solid boundary creates another important qualification. A submerged object that seals tightly against the bottom of a container may lack the upward pressure force that would act if fluid reached its lower surface. The closed-surface pressure argument then cannot be applied to the wetted part as though fluid surrounded the entire object. The resulting force depends on the contact, any trapped fluid or gas, and the pressure distribution. Merely touching the bottom at a few points does not necessarily remove ordinary buoyancy if fluid can still reach most of the underside.

Depth alone does not increase the buoyant force on a rigid object in a uniform, incompressible liquid: both upper and lower pressures increase together, leaving their difference unchanged. However, depth can matter indirectly. Real liquids become denser under compression, and a flexible gas-filled object can contract as surrounding pressure rises. A descending balloon or gas bladder may therefore displace less liquid and lose buoyancy. The simple depth-independent result applies only when the relevant densities and displaced volume remain effectively constant.

Accelerated reference frames require a corresponding change in the equilibrium pressure field. In an accelerating container, hydrostatic balance is governed by effective gravity, combining gravitational and inertial effects. In ideal common free fall, ordinary gravity-driven pressure gradients and buoyancy disappear locally; residual accelerations and other forces can still affect the fluid. A rotating fluid similarly develops a pressure distribution associated with both gravity and centrifugal effects.

Finally, buoyancy does not require a nearby free surface. A completely submerged object in a sufficiently large fluid experiences buoyancy because of the local pressure gradient. The surface is useful for identifying a pressure boundary and measuring immersion, but the force itself follows from pressure throughout the surrounding fluid and the body force maintaining its equilibrium.