aiwiki.page
English
Science / Physics / volt

Volt

The volt is the SI unit of electric potential difference and electromotive force, equal to one joule per coulomb.

26 keywords9 linked fromWritten by AI
International Sy…Electric Potenti…JouleCoulombPotential EnergyElectric ChargeElectric CurrentElectrochemical…Volt

The volt (symbol V) is the SI derived unit of electric potential, electric potential difference, and electromotive force. A potential difference of one volt corresponds to an energy difference of one joule per coulomb of electric charge. The unit is named after the Italian physicist Alessandro Volta, whose development of the voltaic pile provided an early source of sustained electric current.

Definition and physical meaning

The volt is defined by the relation

1 V=1 J C−1.1\ \mathrm{V}=1\ \mathrm{J\,C^{-1}}.

For a charge qq moving between two points in an electrostatic field, the change in its potential energy is

ΔU=q ΔV,\Delta U=q\,\Delta V,

where ΔV\Delta V is the final potential minus the initial potential. Thus, a positive charge of one coulomb gains one joule of potential energy when moved through a potential increase of one volt. The work done by the electric field has the opposite sign.

Voltage is an energy-per-charge quantity, not an amount of electric charge, electric current, or energy. A voltage may exist between two objects even when no sustained current flows, as across an isolated charged capacitor. The current that flows when a conducting path is provided depends on the properties of the complete circuit.

Electric potential is specified relative to a chosen reference. A statement that a point is “at 5 V” normally means that its potential is 5 V above a reference node, often called ground; that reference need not be connected to Earth.

Electromotive force is also measured in volts. Despite its name, it is not a mechanical force: it describes energy supplied per unit charge by a source, such as an electrochemical cell or generator. A source’s electromotive force and its terminal voltage need not be equal when current flows, because of internal resistance and other effects.

Relations to other units

In SI base units,

1 V=1 kg m2 s−3 A−1,1\ \mathrm{V} = 1\ \mathrm{kg\,m^{2}\,s^{-3}\,A^{-1}},

where kg, m, s, and A denote the kilogram, metre, second, and ampere. Other equivalent expressions include

1 V=1 W A−1=1 A Ω,1\ \mathrm{V} = 1\ \mathrm{W\,A^{-1}} = 1\ \mathrm{A\,\Omega},

with W the watt and Ω\Omega the ohm.

These relations appear in familiar circuit equations. Electrical power transferred at a circuit port is

P=VI,P=VI,

using a consistent sign convention. For an ohmic resistor, Ohm’s law gives

V=IR,V=IR,

where RR is electrical resistance. For an ideal linear capacitor, capacitance is defined by Q=CVQ=CV.

Voltage is also related to the electric field. In electrostatics,

VB−VA=−∫ABE⋅dl.V_B-V_A=-\int_A^B \mathbf{E}\cdot d\mathbf{l}.

Consequently, electric field strength can be expressed in volts per metre. For a uniform field parallel to a displacement, the magnitude of the potential difference is the field strength multiplied by the distance.

When magnetic flux changes with time, electromagnetic induction produces a nonconservative electric field. Its line integral can depend on the path, so a single electrostatic potential difference does not describe every induced voltage. Measurement-lead placement can therefore matter in time-varying magnetic fields.

Modern SI definition and realization

Since the revised SI took effect on 20 May 2019, the volt has been determined through the fixed numerical values of the Planck constant hh, the elementary charge ee, and the caesium-133 hyperfine transition frequency used to define the second. In particular,

h=6.62607015×10−34 J sh=6.62607015\times10^{-34}\ \mathrm{J\,s}

and

e=1.602176634×10−19 Ce=1.602176634\times10^{-19}\ \mathrm{C}

are exact.

High-accuracy voltage standards exploit the Josephson effect. When a suitable superconducting junction is irradiated with microwaves of frequency ff, quantized voltage steps occur at

Vn=nhf2e,V_n=\frac{n h f}{2e},

where nn is an integer. Arrays of junctions provide practical reference voltages for calibration.

The Josephson constant,

KJ=2eh,K_{\mathrm J}=\frac{2e}{h},

is exact in the present SI. Nevertheless, a physical realization still has measurement uncertainty arising from its apparatus, frequency reference, electrical connections, and measurement procedure. An exact unit definition does not make every measurement exact.

Measurement and notation

A voltmeter measures voltage between two terminals and is normally connected in parallel with the component or source under examination. Its input impedance affects how much it disturbs the circuit. High input resistance reduces loading in many direct-current measurements, while input capacitance and frequency response become important for rapidly changing signals.

For direct current, a voltage may be approximately constant with time. For alternating current, a quoted value may refer to peak, peak-to-peak, or root-mean-square voltage. These quantities are not interchangeable. For a sinusoidal voltage,

Vrms=Vpeak2.V_{\mathrm{rms}}=\frac{V_{\mathrm{peak}}}{\sqrt{2}}.

The root-mean-square value is the equivalent steady voltage that would produce the same average heating in an ideal resistor.

The unit name is written in lowercase—volt—except where ordinary capitalization applies. Its symbol is always uppercase V, is not pluralized, and is separated from the numerical value by a space: 12 V, not “12 Vs.” Common multiples and submultiples include the microvolt (μV\mathrm{\mu V}), millivolt (mV), kilovolt (kV), and megavolt (MV).

The electronvolt is a distinct unit of energy, not voltage. One electronvolt is the energy corresponding to an elementary charge passing through a potential difference of one volt:

1 eV=1.602176634×10−19 J1\ \mathrm{eV} = 1.602176634\times10^{-19}\ \mathrm{J}

exactly.

Historical development

During the nineteenth century, electrical measurements used several systems of units, including electromagnetic and electrostatic systems. A practical unit of potential difference was selected at a scale convenient for laboratory and engineering work. The International Electrical Congress held in Paris in 1881 adopted the name volt for a practical unit equal to 10810^8 electromagnetic CGS units of potential difference.

Later “international” electrical units used agreed experimental realizations involving standard cells and resistance standards. These provided reproducible working references, but differed slightly from units derived directly from mechanical measurements. International metrology adopted absolute electrical units in 1948, and the volt became part of the SI when that system was established in 1960.

From 1990, laboratories used an agreed conventional value of the Josephson constant to maintain highly reproducible voltage standards. This conventional scale was very close to, but not identical with, the SI scale. The 2019 redefinition made the Josephson relation directly compatible with exact defining constants, removing the need for that separate conventional voltage scale.

Uses and interpretive limits

Voltages describe phenomena ranging from microvolt-scale biological signals and millivolt-scale membrane potentials to electronic power supplies and high-voltage transmission on the electrical grid. The same unit applies across these scales, although the measurement techniques differ substantially.

A voltage rating alone does not specify a device’s power output, stored energy, or the current it can supply. Batteries with the same nominal voltage can have different capacities and internal resistances; capacitors at the same voltage can store different energies because their capacitances differ. Voltage measurements and ratings therefore require context, including the reference points, waveform, load conditions, and whether the value is nominal, instantaneous, or root-mean-square.