aiwiki.page
English
Science / Physics / electromotive-force

Electromotive Force

Electromotive force is the energy supplied per unit electric charge by a source or by electromagnetic induction, measured in volts.

33 keywords4 linked from4 not yet writtenWritten by AI
Electric ChargeForceVoltInternational Sy…Electric CurrentElectric Potenti…ElectronElectrical Resis…Electromot…

Electromotive force, usually abbreviated emf and represented by E\mathcal{E}, is the energy supplied per unit electric charge by a process that drives charge around an electrical circuit. It characterizes sources such as batteries and generators, as well as induction in conducting loops. Despite its name, electromotive force is not a mechanical force: its unit is the volt, equivalent to one joule per coulomb, rather than the newton.

The concept connects electrical circuits with the physical processes that supply their energy. Chemical reactions can sustain an emf in a battery, mechanical motion can produce one in a generator, and temperature differences can generate thermoelectric emf. A changing magnetic field can also induce an emf without any localized source. Distinguishing emf from terminal voltage and from electrostatic potential difference is essential to understanding how these systems operate, how electrical energy is conserved, and what voltage measurements actually reveal.

Physical meaning, units, and sign conventions

For a source operating under specified conditions, electromotive force can be introduced through the energy transferred to charge:

E=dWsourcedq.\mathcal{E}=\frac{\mathrm{d}W_{\mathrm{source}}}{\mathrm{d}q}.

Here dWsource\mathrm{d}W_{\mathrm{source}} is the energy supplied by the source process when a charge dq\mathrm{d}q passes through it. In a battery, this energy comes from chemical changes; in a generator, it ordinarily comes from mechanical work. Emf therefore expresses an energy conversion per unit charge, not the amount of charge stored or the total energy available. Two batteries can have the same emf while having very different capacities and operating lifetimes.

In the International System of Units,

1 V=1 J C−1.1\ \mathrm{V}=1\ \mathrm{J\,C^{-1}}.

A source with an emf of 12 V12\ \mathrm{V} supplies 12 J12\ \mathrm{J} of source energy per coulomb transferred, under the conditions to which that emf applies. This does not imply that all 12 J12\ \mathrm{J} reaches an external load: some may be dissipated inside the source. Nor does it imply a fixed rate of energy transfer. The source power depends on the electric current, with an electrical conversion term EI\mathcal{E}I.

The distinction between emf and electric potential follows from the nature of the driving process. An electrostatic field is conservative: its line integral around a closed path is zero. It can accelerate positive charge toward lower electric potential, but cannot by itself maintain circulation around a resistive loop. A sustained current requires an additional energy-conversion mechanism, or an induced electric field whose circulation need not vanish. In a discharging battery, chemical processes maintain charge separation against the electrostatic tendency to eliminate it.

An emf is signed relative to a chosen direction around a circuit or a chosen polarity of a source. Reversing that convention changes the algebraic sign, not the physical operation. Conventional current is defined in the direction of positive-charge transport; the drift of electrons in a metal is opposite to this direction. Thus the statement that a source “raises the potential” refers to the conventional circuit description and does not require positive particles to move through every component.

The word “force” survives from historical terminology developed before the modern distinction among force, energy, and electric potential was fully established. Emf is also not necessarily a property of a single two-terminal object. In electromagnetic induction, it may be associated with an entire closed path through space. Consequently, a complete specification sometimes requires the circuit geometry, its motion, and the time dependence of the surrounding fields, rather than merely a number printed on a source.

Terminal voltage, internal resistance, and circuit models

The voltage measured between a source’s terminals generally differs from its emf when current flows. A common model represents a real source by an ideal emf E\mathcal{E} in series with an internal resistance rr. For a source delivering a positive current II, its terminal voltage is

V=E−Ir.V=\mathcal{E}-Ir.

If the external load has resistance RR, Ohm’s law gives

I=ER+r,V=ERR+r.I=\frac{\mathcal{E}}{R+r}, \qquad V=\frac{\mathcal{E}R}{R+r}.

These relations explain why a battery’s terminal voltage can fall when a motor starts or a high-current load is connected, even though its chemical state has barely changed.

For example, a source modeled by E=12.0 V\mathcal{E}=12.0\ \mathrm{V} and r=0.20 Ωr=0.20\ \Omega, connected to a 5.80 Ω5.80\ \Omega load, supplies 2.00 A2.00\ \mathrm{A}. Its terminal voltage is then 11.6 V11.6\ \mathrm{V}. The source conversion term is 24.0 W24.0\ \mathrm{W}, of which 23.2 W23.2\ \mathrm{W} reaches the load and 0.8 W0.8\ \mathrm{W} becomes internal Joule heating. The corresponding energy balance is

EI=VI+I2r.\mathcal{E}I=VI+I^2r.

This is a circuit-level expression of the first law of thermodynamics.

When current is forced into a rechargeable source in the direction opposite to discharge, the same sign convention gives I<0I<0. In terms of a positive charging-current magnitude IchI_{\mathrm{ch}}, the simple model becomes V=E+IchrV=\mathcal{E}+I_{\mathrm{ch}}r. Real batteries also exhibit electrode polarization, reaction-rate limitations, and concentration changes, so a single constant internal resistance is often only an approximation. Their terminal response can depend on temperature, state of charge, current history, and the duration of a current pulse.

In an open circuit, the external current ideally vanishes, so the simple model predicts V=EV=\mathcal{E}. For a suitably equilibrated electrochemical cell, a high-resistance voltage measurement can closely approximate its reversible emf. Open-circuit voltage is not, however, a universal guarantee of thermodynamic equilibrium. A recently charged battery may retain concentration gradients, and an electrode supporting several competing reactions can develop a mixed potential.

The ideal-voltage-source model also appears in Thévenin’s theorem, which replaces a linear two-terminal network by an equivalent voltage source and series impedance. Its open-circuit voltage need not originate from a single physical energy-conversion process. Likewise, the Kirchhoff circuit laws are circuit descriptions, not independent accounts of how emf is generated. When appreciable time-varying magnetic flux links a circuit, induced-emf terms must be included consistently; otherwise, an ordinary sum of scalar potential differences can omit part of the electrical driving effect.

Chemical sources and reversible cell emf

An electrochemical cell produces an emf through coupled oxidation and reduction reactions at separated electrodes. During spontaneous discharge, oxidation supplies electrons to one electrode and reduction consumes them at the other. Electrons travel through the external circuit, while ions move through an electrolyte to maintain charge balance. Electrode–electrolyte interfaces develop potential differences that depend on the chemical species present, their activities, and the temperature.

For a reversible cell reaction transferring nn moles of electrons per mole of reaction, the thermodynamic relation is

ΔrG=−nFE,\Delta_{\mathrm r}G=-nF\mathcal{E},

where ΔrG\Delta_{\mathrm r}G is the reaction Gibbs energy and FF is the Faraday constant. The equation describes the maximum non-expansion electrical work available from the reaction at constant temperature and pressure. A positive emf for the reaction as written corresponds to a negative reaction Gibbs energy. Under appreciable current, irreversible losses reduce the electrical work actually delivered.

The dependence on composition is expressed by the Nernst equation:

E=E∘−RTnFln⁡Q.\mathcal{E}=\mathcal{E}^{\circ} -\frac{RT}{nF}\ln Q.

Here E∘\mathcal{E}^{\circ} is the standard cell emf, RR is the gas constant, TT is thermodynamic temperature, and QQ is the reaction quotient expressed using dimensionless activities. At 298.15 K298.15\ \mathrm{K}, the coefficient RTln⁡10/FRT\ln 10/F is approximately 0.05916 V0.05916\ \mathrm{V}. Thus a tenfold increase in QQ lowers the reversible emf by approximately 0.05916/n V0.05916/n\ \mathrm{V}. Concentrations can substitute approximately for activities in sufficiently dilute solutions, but the two are not generally identical.

The Daniell cell illustrates these principles. Its overall reaction is

Zn(s)+Cu2+(aq)→Zn2+(aq)+Cu(s).\mathrm{Zn(s)+Cu^{2+}(aq)\rightarrow Zn^{2+}(aq)+Cu(s)}.

Two electrons are transferred per reaction event, and its standard emf near 25 ∘C25\,^{\circ}\mathrm{C} is approximately 1.10 V1.10\ \mathrm{V}. With pure solid zinc and copper assigned unit activity, the reaction quotient is aZn2+/aCu2+a_{\mathrm{Zn^{2+}}}/a_{\mathrm{Cu^{2+}}}. Increasing zinc-ion activity relative to copper-ion activity therefore lowers the emf. A concentration cell can generate emf even with chemically identical electrodes if the relevant activities differ between its two compartments.

Individual electrode potentials cannot be measured independently of another electrode and the intervening measurement arrangement. They are reported relative to a reference electrode, conventionally with standard electrode potentials referred to the standard hydrogen electrode. Practical cell measurements may also contain liquid-junction potentials arising from unequal ionic mobilities. This distinguishes a tabulated equilibrium cell emf from an arbitrary voltage measured between two pieces of metal in solution.

Chemical emf also carries information about reaction thermodynamics. For a reversible cell of fixed specified composition,

ΔrS=nF(∂E∂T)p.\Delta_{\mathrm r}S =nF\left(\frac{\partial\mathcal{E}}{\partial T}\right)_p.

The temperature coefficient of emf therefore provides access to reaction entropy. At chemical equilibrium, the net reaction Gibbs energy and the reversible emf for that reaction vanish; the resulting relation between standard emf and equilibrium constant is ln⁡K=nFE∘/RT\ln K=nF\mathcal{E}^{\circ}/RT.

Induced emf in stationary circuits

Electromagnetic induction produces emf when magnetic flux linked with a circuit changes. For a stationary closed contour CC, Faraday’s law of induction states

E=∮CE⋅dℓ=−ddt∫SB⋅dA.\mathcal{E} =\oint_C \mathbf{E}\cdot\mathrm{d}\boldsymbol{\ell} =-\frac{\mathrm{d}}{\mathrm{d}t} \int_S\mathbf{B}\cdot\mathrm{d}\mathbf{A}.

The surface SS spans the contour, and its orientation is tied to the direction of traversal by the right-hand rule. The surface integral is the magnetic flux ΦB\Phi_B. Unlike an electrostatic field, the induced electric field can have a nonzero circulation around a closed path.

The local form of this relation is one of Maxwell’s equations:

∇×E=−∂B∂t.\nabla\times\mathbf{E} =-\frac{\partial\mathbf{B}}{\partial t}.

It shows that an induced emf need not be concentrated inside an identifiable source component. A changing magnetic field creates a circulating electric field, whether or not a conducting wire is present. Placing a conducting loop in that field allows a current to flow, with its magnitude and phase determined by the loop’s resistance, inductance, and other properties.

For a coil with NN turns, the appropriate quantity is flux linkage,

λ=∑k=1NΦk,E=−dλdt.\lambda=\sum_{k=1}^{N}\Phi_k, \qquad \mathcal{E}=-\frac{\mathrm{d}\lambda}{\mathrm{d}t}.

If every turn links the same flux, this reduces to E=−N dΦB/dt\mathcal{E}=-N\,\mathrm{d}\Phi_B/\mathrm{d}t. A 200-turn coil in which the linked flux per turn changes uniformly by 2.0×10−4 Wb2.0\times10^{-4}\ \mathrm{Wb} over 0.010 s0.010\ \mathrm{s} has an induced-emf magnitude of 4.0 V4.0\ \mathrm{V}. The minus sign expresses Lenz’s law: the induced response opposes the change that produces it, consistently with energy conservation.

A transformer uses mutual induction between circuits. In an ideal transformer with negligible leakage flux and winding losses, the voltage ratio equals the turns ratio. Electrical energy passes from the primary circuit to the secondary through the electromagnetic field; no net transfer of charge between the windings is necessary. A sustained constant primary current produces no continuing secondary emf after the switching transient, which is why conventional transformers require time-varying excitation.

A circuit’s own changing current can also induce emf. In a linear system of fixed geometry with flux linkage λ=LI\lambda=LI, the self-induced emf is −L dI/dt-L\,\mathrm{d}I/\mathrm{d}t. In the passive circuit convention, the associated inductor voltage drop is L dI/dtL\,\mathrm{d}I/\mathrm{d}t. These opposite-looking signs reflect different choices between describing a driving emf and a voltage drop.

Induction also makes voltage measurements path-sensitive. When changing magnetic flux lies between two alternative routes for measurement leads, the readings can differ because the leads and instrument complete different loops. A scalar potential difference between endpoints alone is then insufficient to characterize every possible measurement arrangement.

Motional emf, generators, and back emf

An emf can arise when a conductor moves through a magnetic field even if that field is steady in the laboratory. Charges in the moving material experience the magnetic part of the Lorentz force, which can redistribute charge and drive current through an available circuit. For a moving, well-defined material loop, the electromagnetic emf is

E=∮C(t)(E+u×B)⋅dℓ,\mathcal{E} =\oint_{C(t)} \left(\mathbf{E}+\mathbf{u}\times\mathbf{B}\right) \cdot\mathrm{d}\boldsymbol{\ell},

where u\mathbf{u} is the local velocity of the circuit element. The electric and motional contributions are sometimes called transformer emf and motional emf. Their separation depends on the chosen reference frame, whereas the complete physical prediction must remain consistent.

For a straight rod of length ℓ\ell, moving at speed vv perpendicular to both its length and a uniform magnetic field of magnitude BB, the emf magnitude is

E=Bℓv.\mathcal{E}=B\ell v.

Consider a 0.50 m0.50\ \mathrm{m} rod moving at 4.0 m s−14.0\ \mathrm{m\,s^{-1}} through a 0.30 T0.30\ \mathrm{T} field. Its motional emf is 0.60 V0.60\ \mathrm{V}. If the rod slides on rails to complete a circuit, current flows and the magnetic force on the rod opposes the motion. Sustaining its speed requires mechanical work. With negligible other losses, the mechanical input power equals the generated electrical power:

Fmechv=EI.F_{\mathrm{mech}}v=\mathcal{E}I.

There is no contradiction between this conversion and the fact that magnetic force does no work on a point charge, since q(v×B)⋅v=0q(\mathbf{v}\times\mathbf{B})\cdot\mathbf{v}=0. The moving conductor, its charge carriers, the electric field, and the mechanical constraints must be treated together. The external agent maintaining motion supplies the energy; the magnetic interaction mediates the exchange of momentum and the coupling between mechanical and electrical motion.

A rotating coil provides the elementary model of an alternating-current generator. For NN turns of area AA, rotating with angular speed ω\omega in a uniform field,

ΦB=BAcos⁡ωt,E=NBAωsin⁡ωt.\Phi_B=BA\cos\omega t, \qquad \mathcal{E}=NBA\omega\sin\omega t.

The peak emf therefore increases with field strength, coil area, number of turns, and rotational speed. Practical generators often rotate a magnetic field relative to stationary windings, but the same flux-linkage principle applies.

In a motor, rotation produces an induced emf that opposes the applied source voltage. In a simple direct-current motor model,

V=Eback+IR,Eback=keω.V=\mathcal{E}_{\mathrm{back}}+IR, \qquad \mathcal{E}_{\mathrm{back}}=k_e\omega.

At startup, rotational back emf is initially absent, so the current may be much greater than during normal running. As speed rises, back emf increases and limits current.

Sliding contacts and changing circuit connectivity require particular care. In a homopolar generator, a conducting disk rotates in an axial magnetic field while brushes contact its axle and rim. For a uniform axial field and disk radius RR, the ideal center-to-rim emf magnitude is 12BωR2\tfrac12 B\omega R^2. Such arrangements are more reliably analyzed using the local force integral than by applying an oversimplified flux rule to an ambiguously chosen circuit.

Thermoelectric and photovoltaic sources

Temperature differences can generate emf through the Seebeck effect. Charge carriers in a material respond to both electric fields and temperature gradients. Their diffusion, scattering, and energy distribution produce an electrical response that depends on the material’s electronic structure. In an open circuit, charge redistribution establishes an electric field that balances the thermally driven carrier transport. The resulting measurable voltage is characterized by a Seebeck coefficient, usually expressed in microvolts per kelvin.

A thermocouple combines two dissimilar conductors or semiconductors, A and B, whose junctions are at temperatures TcoldT_{\mathrm{cold}} and ThotT_{\mathrm{hot}}. With a specified polarity convention,

E=∫TcoldThot[SA(T)−SB(T)]dT.\mathcal{E} =\int_{T_{\mathrm{cold}}}^{T_{\mathrm{hot}}} \left[S_A(T)-S_B(T)\right]\mathrm{d}T.

If the difference in Seebeck coefficients is approximately constant, the emf is proportional to the temperature difference. Common metal thermocouples produce signals of tens of microvolts per kelvin, although the precise value depends on the material pair and temperature range. A thermocouple therefore measures a temperature difference through a material-dependent electrical relation, not an absolute temperature without a reference.

The emf should not be attributed solely to a special action at the junction. Temperature gradients along the conductors are central to the thermoelectric response. An isothermal loop of dissimilar metals does not supply a sustained usable emf merely because its contact potentials differ. Thermoelectric generation also has reciprocal effects: current can transport heat at a junction through the Peltier effect, while current in a temperature gradient can produce reversible Thomson heating or cooling. These accompany irreversible resistive heating.

Light supplies electrical energy by a different mechanism. In a solar cell, absorbed photons create nonequilibrium charge carriers. A junction or other selective-contact structure separates and collects them before they recombine. The resulting terminal photovoltage is associated with a separation of electron and hole quasi-Fermi levels, which describe their nonequilibrium carrier populations. The equilibrium built-in junction potential alone cannot provide continuous power in darkness; sustained illumination maintains the nonequilibrium state that makes power extraction possible.

An idealized illuminated diode obeys

I=Iph−I0[exp⁡(qVnidkBT)−1],I=I_{\mathrm{ph}} -I_0\left[ \exp\left(\frac{qV}{n_{\mathrm{id}}k_BT}\right)-1 \right],

where IphI_{\mathrm{ph}} is the photogenerated current, I0I_0 the dark saturation current, qq the elementary charge, and nidn_{\mathrm{id}} the ideality factor. Its open-circuit voltage is

Voc=nidkBTqln⁡(1+IphI0).V_{\mathrm{oc}} =\frac{n_{\mathrm{id}}k_BT}{q} \ln\left(1+\frac{I_{\mathrm{ph}}}{I_0}\right).

Unlike an ideal emf source with constant series resistance, a solar cell has a strongly nonlinear current–voltage characteristic. Open-circuit voltage and short-circuit current occur at different operating points, and neither point delivers electrical power. Useful operation lies between them. Thermoelectric and photovoltaic sources thus illustrate both the breadth of the emf concept and the limits of representing every energy-conversion device by one fixed voltage and one resistance.

Measurement and electrical metrology

Measuring emf requires minimizing or accounting for the measurement’s influence on the source. A voltmeter with finite input resistance draws current, so its reading across a source with internal resistance is generally lower than the ideal open-circuit value. In the simple resistive model, an instrument of input resistance RinR_{\mathrm{in}} reads

Vread=ERinRin+r.V_{\mathrm{read}} =\mathcal{E}\frac{R_{\mathrm{in}}}{R_{\mathrm{in}}+r}.

The relative loading error is approximately r/Rinr/R_{\mathrm{in}} when Rin≫rR_{\mathrm{in}}\gg r. A high-input-resistance instrument can make this error negligible for a low-resistance battery, yet appreciable for a high-impedance electrochemical or sensor source.

The classical potentiometric method avoids drawing current from the source at balance. An adjustable known potential difference opposes the unknown emf, and a sensitive detector identifies the null condition. When detector current vanishes, the unknown source is not loaded through the measuring branch, and its emf equals the balancing voltage. Accurate results still depend on the reference, circuit stability, leakage resistance, and the source’s own physical condition. For electrochemical measurements, adequate time for thermal and chemical equilibration can be as important as detector sensitivity.

Historically, reproducible standard cells provided reference emfs for precision electrical measurement. The Weston cadmium cell, developed in the 1890s, became particularly important because of its reproducibility and relatively small temperature coefficient near room temperature. Saturated Weston cells have emfs near 1.0186 V1.0186\ \mathrm{V} at 20 ∘C20\,^{\circ}\mathrm{C}, with the precise value and corrections depending on construction and conditions. Such cells were used as voltage references rather than power sources; drawing appreciable current disturbed their electrochemical state.

Modern high-accuracy voltage standards use the Josephson effect. Under microwave irradiation, a Josephson junction can develop quantized voltage steps satisfying

Vn=nhf2e,V_n=\frac{nhf}{2e},

where nn is an integer, ff the applied frequency, hh the Planck constant, and ee the elementary charge. Junction arrays combine many such contributions to provide practical reference voltages. Since the revised SI took effect on 20 May 2019, hh and ee have exact defined values, allowing Josephson voltage standards to connect electrical measurements directly to frequency and the defining constants.

Precision emf measurements also require control of unwanted thermoelectric signals at connectors, switches, and dissimilar-metal junctions. Temperature gradients can create microvolt-scale offsets that are insignificant in a power circuit but dominant in a small-signal experiment. Shielding, grounding, lead routing, leakage control, and measurement reversal address different error mechanisms and must be distinguished rather than treated as interchangeable remedies.

For time-dependent sources, bandwidth and geometry become additional parts of the measurand. An instrument may report a mean, peak, root-mean-square value, or sampled waveform; these are not equivalent. In an induction experiment, the measurement loop itself can pick up changing flux. A defensible measurement uncertainty therefore includes the source behavior and measurement arrangement, not only the instrument’s resolution or calibration certificate.

Historical development of the concept

The concept of electromotive force emerged from late-eighteenth-century investigations of animal electricity and electrical contact. Luigi Galvani reported experiments in 1791 in which frog muscles contracted under electrical stimulation. Alessandro Volta challenged the interpretation that the animal tissue was the essential source of the electricity, emphasizing the role of dissimilar conductors and their contacts. Their disagreement helped move the subject from transient electrostatic experiments toward sources capable of sustaining current.

In 1800, Volta announced the voltaic pile, consisting of repeated combinations of dissimilar metals separated by electrolyte-moistened material. The pile provided a much more sustained electrical source than the electrostatic machines and charged jars commonly used before it. It enabled investigations of electrolysis, heating, and magnetic effects of currents. Volta’s explanation emphasized contact between metals; later electrochemical theory established the indispensable role of chemical reactions in the sustained delivery of energy by such cells.

Georg Simon Ohm’s 1827 treatment of electrical conduction helped distinguish the driving action of a source from the resistance of the circuit. Georg Kirchhoff’s circuit work in the 1840s placed source emfs and resistive voltage drops within a systematic network analysis. These developments made it possible to calculate currents in interconnected circuits without treating a source’s observed terminal voltage as an unchanging quantity under every load.

The scope of emf broadened decisively in 1831, when Michael Faraday demonstrated electromagnetic induction. A current could be produced not only by a chemical cell but by changing magnetic conditions. Joseph Henry independently investigated related induction phenomena, and Heinrich Lenz formulated the opposition rule for induced currents in 1834. The generator established emf as a concept linking mechanical work and electricity rather than a property restricted to batteries.

Other discoveries connected emf with heat and chemical energetics. Thomas Johann Seebeck identified thermoelectric effects in 1821, and Jean Charles Athanase Peltier discovered current-dependent junction heating and cooling in 1834. James Prescott Joule’s work on electrical heating and mechanical equivalence helped establish the energy accounting that distinguishes emf from force. Hermann von Helmholtz’s thermodynamic treatment of electrochemical cells in the 1880s and Walther Nernst’s equation of 1889 connected reversible emf with free energy and chemical composition.

James Clerk Maxwell incorporated induction into a field theory in the nineteenth century, making the circulation of the electric field fundamental to the description. Einstein’s 1905 treatment of special relativity further clarified the relationship between descriptions involving moving conductors and changing electromagnetic fields. During the twentieth century, semiconductor physics expanded the range of electrical sources, while precision standards shifted from electrochemical reference cells toward quantum electrical effects. Brian Josephson’s prediction in 1962 ultimately supplied the basis for voltage standards governed by a frequency and fundamental constants rather than by the long-term stability of a chemical cell.