Vapor pressure deficit (VPD) is the difference between the saturation vapor pressure of water at a specified temperature and the actual partial pressure of water vapor in the air. It expresses how far air is from saturation and is widely used to characterize atmospheric drying demand. VPD is important in meteorology, plant physiology, hydrology, and controlled-environment agriculture because it helps determine the driving force for evaporation and water loss from vegetation. It is a pressure difference, usually reported in kilopascals (kPa), rather than a direct measure of atmospheric water content or water-loss rate.
Definition and calculation
For air at temperature , atmospheric VPD is defined as
where is the vapor pressure deficit, is saturation vapor pressure at air temperature, and is actual water vapor pressure. Actual vapor pressure is the partial pressure contributed by water vapor to the gas mixture.
Relative humidity expresses the same departure from saturation as a ratio rather than a difference:
Consequently,
At saturation, relative humidity is 100% and atmospheric VPD is zero. In unsaturated air, VPD is positive. Supersaturation formally gives a negative value, although many applications assume unsaturated conditions or handle supersaturation separately.
A commonly used approximation for saturation vapor pressure over liquid water is
with in degrees Celsius and in kilopascals. This expression is useful over ordinary environmental temperatures; high-precision work and calculations involving ice require an appropriate formulation and reference phase.
For example, at , saturation vapor pressure is approximately . At 50% relative humidity,
At and the same relative humidity, VPD is approximately . Thus, identical relative humidity does not imply identical atmospheric drying demand.
Physical basis
Saturation vapor pressure describes equilibrium between water vapor and a condensed phase, such as liquid water. Its strong temperature dependence follows from thermodynamics and can be described by the Clausius–Clapeyron equation. Over temperatures commonly encountered near Earth's surface, saturation vapor pressure increases by roughly 6–7% per degree Celsius, although the fractional rate varies with temperature.
The common statement that warmer air “holds more water” is shorthand for this equilibrium relationship. Air is not a container with a fixed water-storage capacity. Instead, the vapor pressure compatible with equilibrium over liquid water rises as temperature increases.
VPD can increase in two distinct ways:
- Warming: saturation vapor pressure rises while actual vapor pressure remains unchanged or increases more slowly.
- Drying: actual vapor pressure decreases at a given temperature.
Conversely, cooling or adding water vapor can reduce VPD. Near saturation, further cooling may produce condensation if suitable surfaces or particles are available.
VPD therefore differs from both relative humidity and absolute measures of atmospheric moisture. Two air masses can have the same VPD but different temperatures and water vapor contents.
Atmospheric and leaf-to-air deficits
A crucial distinction is whether saturation vapor pressure is evaluated at air temperature or at the temperature of an evaporating surface.
For vegetation, the leaf-to-air vapor pressure difference is often approximated by
where is leaf temperature. This assumes that the air within the leaf's evaporating spaces is approximately saturated at leaf temperature.
Leaf temperature can differ substantially from air temperature because of absorbed radiation, evaporative cooling, and heat exchange with surrounding air. A sunlit leaf may be warmer than the air, producing a larger leaf-to-air deficit than atmospheric VPD suggests. A strongly cooled leaf may have a smaller deficit. If its temperature falls below the ambient dew point, water can condense on its surface even when the surrounding air is unsaturated at air temperature.
This distinction matters when interpreting chamber experiments, greenhouse measurements, and ecosystem observations. A reported “VPD” is not fully specified unless its temperature reference is clear.
Role in evaporation and plant water use
Vapor pressure differences help drive the transport of water vapor from wet surfaces to the atmosphere. The resulting flux also depends on transport resistance, available energy, and the supply of liquid water.
In leaves, water vapor moves through stomata and the adjacent boundary layer. A simplified gas-exchange relationship is
where is molar transpiration rate, is the combined conductance to water vapor, and is total air pressure. The pressure ratio approximates a water vapor mole-fraction difference. This relationship assumes consistent units and a simplified description of vapor transport.
If conductance and other conditions remain constant, a larger leaf-to-air deficit increases transpiration. In living plants, however, conductance is not constant. Many plants reduce stomatal opening as VPD increases, limiting water loss while also restricting the entry of carbon dioxide for photosynthesis. Responses vary among species, developmental stages, and environmental conditions.
High VPD can therefore produce several outcomes:
- Increased water loss when water supply and stomatal conductance remain sufficient.
- Reduced stomatal conductance and carbon uptake.
- Increased tension in the plant's water-transport system.
- Changes in leaf temperature as evaporative cooling changes.
The relationship between VPD and transpiration is consequently not universally linear. At high atmospheric demand, stomatal closure or limited water supply can cause transpiration to level off or decline.
At landscape scale, evapotranspiration combines evaporation from surfaces with plant transpiration. VPD contributes to the aerodynamic component of the Penman–Monteith equation, but radiation, wind, surface resistance, and water availability also affect the calculated flux.
Applications
Agriculture and controlled environments
VPD is used to describe crop growing conditions and interpret plant water demand. In greenhouses and indoor cultivation systems, temperature and humidity management alter VPD, while ventilation and air movement also affect heat and vapor transport.
There is no universal optimum VPD for all crops. Suitable conditions depend on species, growth stage, light, leaf temperature, root-zone conditions, and the purpose of production. A value calculated from room air may not represent conditions within a dense canopy or at individual leaf surfaces.
VPD can support irrigation models, but it does not directly measure how much water is available to roots. Irrigation demand also depends on canopy size, soil or substrate properties, radiation, and recent water use.
Weather, drought, and fire
Meteorological VPD describes atmospheric demand for moisture. High values can accelerate drying of exposed surfaces and vegetation when water and energy are available.
VPD is related to, but distinct from, drought. Drought may involve precipitation deficits, low soil moisture, depleted water storage, or combinations of these conditions. High VPD can intensify the effects of limited water supply, but it can also occur briefly where soils remain wet.
In fire-weather analysis, VPD can help characterize conditions conducive to fuel drying. It is not a complete measure of fire danger: wind, precipitation history, fuel properties, and ignition sources remain important.
Climate and ecosystems
VPD links climate change with vegetation functioning and the water cycle. Warming raises saturation vapor pressure, so VPD increases unless actual vapor pressure rises sufficiently to compensate. Even approximately constant relative humidity implies increasing VPD as temperature rises.
Changes in VPD can affect plant carbon uptake, water use, and the partitioning of surface energy between sensible and latent heat. Their effects depend on water availability, vegetation responses, and interactions between land surfaces and the atmosphere.
Measurement and interpretation limits
VPD is usually calculated from temperature and humidity measurements rather than measured directly. Actual vapor pressure can also be obtained from dew-point measurements. Important limitations include:
- Sensor exposure: solar heating, inadequate ventilation, wet sensors, and placement near moisture sources can distort measurements.
- Spatial variation: conditions at a weather station may differ from those within a canopy or near an evaporating surface.
- Temperature reference: air-temperature VPD and leaf-to-air deficit are not interchangeable.
- Temporal averaging: because saturation vapor pressure is nonlinear in temperature, VPD calculated from mean temperature and mean relative humidity generally differs from mean VPD calculated from simultaneous observations.
- Reference phase: saturation over ice differs from saturation over liquid water below freezing.
- Measurement uncertainty: errors in temperature and humidity propagate into calculated VPD; near saturation, a small absolute error can be large relative to the deficit itself.
VPD quantifies one component of evaporative demand. It does not, by itself, specify actual evaporation, plant water stress, or soil moisture status.