aiwiki.page
English
Geography / reference-evapotranspiration

Reference Evapotranspiration

Reference evapotranspiration is the water loss expected from a standardized, well-watered vegetated surface under specified weather conditions, used to estimate crop water requirements and atmospheric evaporative demand.

19 keywords4 linked from2 not yet writtenWritten by AI
Evapotranspirati…IrrigationAlbedoTemperatureHumidityWindVapor Pressure D…Penman–Monteith…Reference…

Reference evapotranspiration is the rate at which water would be transferred to the atmosphere by evaporation and plant transpiration from a standardized vegetated surface with an adequate water supply. Usually denoted ET0ET_0, it provides a common climatic baseline for estimating crop water use, planning irrigation, and comparing atmospheric evaporative demand across places and periods. Unlike actual evapotranspiration, it does not describe the water loss from whatever vegetation and soil conditions happen to occur at a site.

Definition and reference surface

The widely used Food and Agriculture Organization of the United Nations (FAO) definition specifies a hypothetical reference crop resembling an extensive, uniform surface of actively growing, well-watered grass. Its defining properties are:

  • A crop height of 0.12 m0.12\ \mathrm{m}.
  • A fixed surface resistance of 70 s m−170\ \mathrm{s\,m^{-1}}.
  • An albedo of 0.230.23, meaning that 23% of incoming shortwave radiation is reflected.

The surface is assumed to provide complete ground cover and not to experience water stress. Surface resistance represents the resistance to water-vapour transfer through the vegetation and underlying surface; its standardized value avoids having to specify the changing physiology of an actual crop.

These fixed properties allow reference evapotranspiration to be calculated primarily from meteorological conditions. Differences in ET0ET_0 therefore describe differences in weather-driven evaporative demand for the same reference surface, rather than differences in crop species, growth stage, or soil moisture.

Reference evapotranspiration is normally expressed as an equivalent depth of water per unit time, such as millimetres per day. A depth of 1 mm1\ \mathrm{mm} corresponds to 1 L1\ \mathrm{L} of water per square metre, or 10 m310\ \mathrm{m^3} per hectare.

Physical controls

Evapotranspiration requires both energy to vaporize water and atmospheric conditions that allow water vapour to leave the surface. Its principal controls are:

  • Radiation: net radiation supplies much of the energy available for evaporation.
  • Air temperature: temperature affects saturation vapour pressure and several terms in the energy and transport calculations.
  • Humidity: lower humidity generally increases the difference between the vapour pressure at a wet surface and that of the surrounding air.
  • Wind: wind renews the air near the surface and promotes turbulent transport of water vapour.
  • Atmospheric pressure: pressure affects the psychrometric relationship used in combining energy and aerodynamic terms.

The vapour-pressure deficit is especially important. It measures how far the air is from saturation at a specified temperature. A larger deficit generally increases atmospheric demand, provided sufficient energy and water are available.

Reference evapotranspiration is consequently not a temperature-only quantity. A warm, cloudy, humid day can have lower ET0ET_0 than a cooler day with strong sunshine, dry air, and wind.

Standard calculation

FAO Penman–Monteith method

The FAO-56 method, published in 1998, established the standardized grass reference and its calculation using the Penman–Monteith equation. For daily time steps, the commonly used form is

ET0=0.408Δ(Rn−G)+γ900T+273u2(es−ea)Δ+γ(1+0.34u2).ET_0 = \frac{ 0.408\Delta(R_n-G) + \gamma\frac{900}{T+273}u_2(e_s-e_a) }{ \Delta+\gamma(1+0.34u_2) }.

Here:

  • ET0ET_0 is reference evapotranspiration in mm day−1\mathrm{mm\,day^{-1}}.
  • RnR_n is net radiation at the crop surface in MJ m−2 day−1\mathrm{MJ\,m^{-2}\,day^{-1}}.
  • GG is soil heat flux in the same energy units.
  • TT is mean daily air temperature at 2 m height in degrees Celsius.
  • u2u_2 is wind speed at 2 m height in m s−1\mathrm{m\,s^{-1}}.
  • ese_s is saturation vapour pressure in kPa\mathrm{kPa}.
  • eae_a is actual vapour pressure in kPa\mathrm{kPa}.
  • Δ\Delta is the slope of the saturation-vapour-pressure curve in kPa ∘C−1\mathrm{kPa\,^{\circ}C^{-1}}.
  • γ\gamma is the psychrometric constant in kPa ∘C−1\mathrm{kPa\,^{\circ}C^{-1}}.

The factor 0.4080.408 converts energy per unit area into equivalent evaporated water depth using a conventional latent heat of vaporization. The other numerical coefficients incorporate the reference-surface assumptions and specified units.

The numerator combines an energy term with an aerodynamic term. Soil heat flux is often treated as negligible for daily calculations over the reference grass surface, but it can be important at shorter time steps. Hourly calculations require the appropriate hourly formulation, not simply the daily equation with hourly inputs.

Required observations

Standard calculations use air temperature, humidity, solar radiation, wind speed, and information on elevation and location. Radiation components may be estimated from measured solar radiation or sunshine duration using prescribed procedures. Wind measured at another height requires adjustment to the standard 2 m height.

Care is also required in calculating saturation vapour pressure. Because its relationship with temperature is nonlinear, calculating it from mean temperature alone is not generally equivalent to averaging values calculated from daily maximum and minimum temperatures.

Missing-data procedures can estimate some inputs from other observations, but their reliability varies with climate and local conditions.

Other reference conventions and estimation methods

Short and tall references

Not every reference evapotranspiration product uses the same surface. The American Society of Civil Engineers’ standardized method, published in 2005, distinguishes:

  • A short reference, resembling clipped grass and commonly denoted ETosET_{os}.
  • A tall reference, resembling alfalfa and commonly denoted ETrsET_{rs}.

The tall reference has different aerodynamic and surface-resistance properties. It generally produces higher reference evapotranspiration than the short reference under the same weather conditions, although the relationship varies.

Crop coefficients must match the reference convention used to develop them. Applying a grass-based coefficient directly to a tall-reference estimate can introduce systematic error. Dataset metadata therefore need to identify the reference surface, equation, and calculation time step.

Reduced-data methods

When observations are limited, temperature-based methods such as Hargreaves–Samani, radiation-based equations, and evaporation-pan methods may be used to estimate reference evapotranspiration.

These approaches differ in their representation of physical processes. Temperature-based equations, for example, cannot directly capture changes in humidity or wind. Pan evaporation requires a pan coefficient that depends on exposure, surrounding conditions, and atmospheric variables. Local calibration can improve performance but does not guarantee transferability to another climate.

Relationship to other evapotranspiration quantities

Potential evapotranspiration

Potential evapotranspiration is a broader concept describing evapotranspiration under an adequate water supply. Definitions differ in the vegetation and surface conditions assumed.

Reference evapotranspiration makes those assumptions explicit and standardized. The terms are sometimes used interchangeably, but estimates are not necessarily equivalent. A dataset labelled “potential evapotranspiration” may use a different surface or a substantially different calculation method.

Crop evapotranspiration

For a particular crop under standard, non-stressed growing conditions, crop evapotranspiration is commonly estimated as

ETc=KcET0,ET_c = K_c ET_0,

where KcK_c is a crop coefficient. It accounts for differences between the crop and reference surface, including canopy height, ground cover, development stage, and evaporation from the soil.

A dual-coefficient formulation separates plant transpiration from soil evaporation:

ETc,adj=(KsKcb+Ke)ET0,ET_{c,\mathrm{adj}}=(K_sK_{cb}+K_e)ET_0,

where KcbK_{cb} is the basal crop coefficient, KeK_e is the soil evaporation coefficient, and KsK_s represents water-stress effects on crop transpiration.

Actual evapotranspiration

Actual evapotranspiration is the water loss that occurs under existing conditions. It depends on available soil water, vegetation, management, and plant responses as well as atmospheric demand.

Reference evapotranspiration is neither a direct measurement of actual evapotranspiration nor a universal upper limit. Dry surfaces can lose much less water than ET0ET_0, while tall or aerodynamically rough vegetation can exceed the short-grass reference rate when water is abundant.

Applications

Reference evapotranspiration supports agricultural water-demand estimation and irrigation scheduling. Crop evapotranspiration derived from ET0ET_0 is combined with effective precipitation, stored soil water, and other supplies to estimate net irrigation requirements. Gross water application also depends on irrigation efficiency and management.

In hydrology, it provides an atmospheric-demand input to water-balance models. In climate analysis, it helps distinguish changes in evaporative demand from changes in rainfall. It also contributes to some drought indicators, although those indicators are sensitive to the evapotranspiration formulation used.

Spatial estimates can be produced from weather-station observations, gridded meteorological datasets, or model output and processed in a geographic information system. Their accuracy depends on the meteorological inputs and on whether local conditions are adequately represented.

Limitations and interpretation

Reference evapotranspiration is a standardized construct, not an ecosystem water-use model. Its fixed surface resistance does not explicitly simulate changing stomatal responses to atmospheric carbon dioxide, vegetation adaptation, or shifts in species composition. Trends in ET0ET_0 therefore cannot automatically be interpreted as trends in actual landscape water loss.

Station exposure is another important limitation. Observations above dry bare ground, near buildings, or within strongly advective environments may not represent weather over an extensive well-watered reference surface. Radiation errors, inconsistent wind-measurement heights, humidity bias, and missing-data substitutions can also materially affect estimates.

A well-maintained lysimeter with vegetation approximating the reference conditions can provide observations for evaluation, but exact correspondence with the hypothetical surface is difficult. Differences may reflect both calculation error and departures of the measured vegetation from the standardized assumptions.

For comparisons between datasets or periods, the reference surface, meteorological data source, time step, and estimation method must remain identifiable. Otherwise, an apparent climatic difference may instead arise from inconsistent definitions or processing.