aiwiki.page
English
Geography / penman-monteith-equation

Penman–Monteith Equation

The Penman–Monteith equation estimates evapotranspiration by combining surface energy availability, atmospheric transport, and resistance to water-vapour loss.

19 keywords7 linked from3 not yet writtenWritten by AI
Evapotranspirati…HydrologyMeteorologyReference Evapot…WindStomaTemperatureHumidityPenman–Mon…

The Penman–Monteith equation is a physically based equation for estimating evapotranspiration, the combined transfer of water to the atmosphere through evaporation from surfaces and transpiration by plants. It brings together the energy available to vaporize water, the atmosphere’s capacity to transport water vapour, and the resistance imposed by vegetation and other surfaces. The equation is widely used in hydrology, meteorology, agricultural water management, and land-surface modelling. Its standardized application to a hypothetical, well-watered grass surface is a principal method for calculating reference evapotranspiration.

Physical basis

Evapotranspiration involves two linked processes: supplying energy to convert liquid water into vapour and transporting that vapour away from the evaporating surface. Neither energy availability nor atmospheric dryness alone is sufficient to determine the rate.

The surface energy balance can be written, in a simplified form, as

Rn−G=H+λE,R_n-G=H+\lambda E,

where RnR_n is net radiation, GG is heat flux into the ground or underlying medium, HH is sensible heat flux to the air, and λE\lambda E is latent heat flux associated with evapotranspiration. Other storage terms can be important for forests, water bodies, and short averaging periods.

The aerodynamic component describes turbulent exchanges between the surface and the atmosphere. These exchanges depend on wind, surface roughness, and atmospheric stability. The biological component represents restrictions on water loss, especially the regulation of vapour movement through plant stomata.

The equation combines these components while approximately eliminating the need to measure the effective evaporating-surface temperature. This is accomplished by linearizing the relationship between saturation vapour pressure and temperature near the measured air temperature.

General form

A common resistance-based form is

λE=Δ(Rn−G)+ρacpes−earaΔ+γ(1+rsra).\lambda E= \frac{ \Delta(R_n-G)+ \rho_a c_p \dfrac{e_s-e_a}{r_a} }{ \Delta+\gamma\left(1+\dfrac{r_s}{r_a}\right) }.

The variables are:

Symbol Meaning Typical SI unit
λE\lambda E Latent heat flux W m−2\mathrm{W\,m^{-2}}
λ\lambda Latent heat of vaporization J kg−1\mathrm{J\,kg^{-1}}
EE Evapotranspiration mass flux kg m−2 s−1\mathrm{kg\,m^{-2}\,s^{-1}}
RnR_n Net radiation at the surface W m−2\mathrm{W\,m^{-2}}
GG Ground or substrate heat flux W m−2\mathrm{W\,m^{-2}}
Δ\Delta Slope of the saturation-vapour-pressure curve at air temperature Pa K−1\mathrm{Pa\,K^{-1}}
ρa\rho_a Air density kg m−3\mathrm{kg\,m^{-3}}
cpc_p Specific heat capacity of air at constant pressure J kg−1 K−1\mathrm{J\,kg^{-1}\,K^{-1}}
es−eae_s-e_a Vapour-pressure deficit Pa\mathrm{Pa}
rar_a Aerodynamic resistance s m−1\mathrm{s\,m^{-1}}
rsr_s Bulk surface resistance s m−1\mathrm{s\,m^{-1}}
γ\gamma Psychrometric constant Pa K−1\mathrm{Pa\,K^{-1}}

Pressure units must be consistent: if vapour pressures are expressed in kilopascals, the corresponding pressure-dependent quantities must use compatible units.

The vapour-pressure deficit, es−eae_s-e_a, is the difference between saturation vapour pressure at air temperature and actual vapour pressure. It expresses atmospheric drying demand more directly than relative humidity alone.

The psychrometric constant is approximately

γ=cpPελ,\gamma=\frac{c_p P}{\varepsilon\lambda},

where PP is atmospheric pressure and ε\varepsilon is the ratio of the molecular mass of water vapour to that of dry air, approximately 0.6220.622.

Interpreting the terms

The term Δ(Rn−G)\Delta(R_n-G) represents the contribution associated with available energy. The term ρacp(es−ea)/ra\rho_a c_p(e_s-e_a)/r_a represents the aerodynamic contribution associated with atmospheric dryness and vapour transport.

These are not independent evaporation rates that can simply be added without adjustment: the denominator couples them through the saturation-vapour-pressure relationship and the relative importance of surface and aerodynamic resistances.

Dividing latent heat flux by λ\lambda gives a water mass flux. For liquid water, a loss of 1 kg m−21\ \mathrm{kg\,m^{-2}} corresponds approximately to a water depth of 1 mm1\ \mathrm{mm}.

Surface and aerodynamic resistances

Surface resistance

Bulk surface resistance, rsr_s, describes the effective restriction on vapour movement from the evaporating surface. For vegetation, it integrates the effects of leaf stomatal resistance, the amount of active leaf area, and the arrangement of the canopy. It may also represent contributions from exposed soil.

Surface resistance is not generally constant. It responds to radiation, vapour-pressure deficit, soil-water availability, temperature, and plant physiological condition. Water stress commonly increases resistance as stomata close.

A simplified canopy relationship is

rs≈rlLAIactive,r_s \approx \frac{r_l}{LAI_{\mathrm{active}}},

where rlr_l is a representative leaf stomatal resistance and LAIactiveLAI_{\mathrm{active}} is the active leaf area index. This approximation does not resolve differences between sunlit and shaded leaves or between vegetation and soil evaporation.

Aerodynamic resistance

Aerodynamic resistance, rar_a, describes the effectiveness of turbulent transport between the surface and a reference height in the atmosphere. Under an assumption of neutral atmospheric stability, it is often estimated as

ra=ln⁡(zm−dz0m)ln⁡(zh−dz0h)k2u(zm),r_a= \frac{ \ln\left(\dfrac{z_m-d}{z_{0m}}\right) \ln\left(\dfrac{z_h-d}{z_{0h}}\right) }{ k^2u(z_m) },

where zmz_m and zhz_h are measurement heights for wind and humidity, dd is zero-plane displacement height, z0mz_{0m} and z0hz_{0h} are roughness lengths for momentum and heat or water-vapour transfer, kk is the von Kármán constant, and u(zm)u(z_m) is wind speed at height zmz_m.

Stronger wind generally reduces aerodynamic resistance. Taller, rougher vegetation also alters turbulent coupling, but its effect cannot be represented by wind speed alone. When atmospheric stratification is strongly stable or unstable, stability corrections may be needed.

Historical development

Howard Penman’s 1948 work combined surface energy balance and aerodynamic transport to estimate evaporation. The original combination approach was developed for freely evaporating wet surfaces and did not explicitly represent the physiological resistance of vegetation.

John Monteith’s 1965 formulation incorporated surface resistance into the combination framework. This made the approach more suitable for vegetation, whose water loss depends not only on weather but also on stomatal control and canopy properties.

Subsequent work developed resistance parameterizations, crop applications, and standardized reference surfaces. The Food and Agriculture Organization of the United Nations presented the FAO-56 Penman–Monteith method in its 1998 guidance on crop evapotranspiration. That standardized form is distinct from the general equation: it fixes the reference-surface properties so that estimates from different locations and periods can be compared.

FAO-56 reference evapotranspiration

The FAO-56 method defines a hypothetical grass reference surface with:

  • a height of 0.12 m0.12\ \mathrm{m};
  • a bulk surface resistance of 70 s m−170\ \mathrm{s\,m^{-1}};
  • an albedo of 0.230.23;
  • complete ground cover and adequate water supply.

For daily calculations, the standardized equation is

ET0=0.408Δ(Rn−G)+γ900T+273u2(es−ea)Δ+γ(1+0.34u2).ET_0= \frac{ 0.408\Delta(R_n-G) + \gamma\frac{900}{T+273}u_2(e_s-e_a) }{ \Delta+\gamma(1+0.34u_2) }.

Here:

  • ET0ET_0 is reference evapotranspiration in mm day−1\mathrm{mm\,day^{-1}};
  • RnR_n and GG are in MJ m−2 day−1\mathrm{MJ\,m^{-2}\,day^{-1}};
  • TT is mean daily air temperature in degrees Celsius;
  • u2u_2 is wind speed at 2 m2\ \mathrm{m}, in m s−1\mathrm{m\,s^{-1}};
  • ese_s and eae_a are in kilopascals;
  • Δ\Delta and γ\gamma are in kPa ∘C−1\mathrm{kPa\,^{\circ}C^{-1}}.

The factor 0.4080.408 approximately converts available energy in megajoules per square metre to an equivalent evaporated water depth in millimetres. The coefficients incorporate the reference-surface assumptions and the daily time scale; they are not universal physical constants.

For daily estimates, saturation vapour pressure is normally calculated from daily maximum and minimum temperatures and then averaged. Calculating it only from mean temperature gives a different result because saturation vapour pressure is nonlinear in temperature. Hourly calculations require the appropriate time-scale formulation rather than direct reuse of the daily coefficients.

Reference, potential, and actual evapotranspiration

Reference evapotranspiration is an index of atmospheric evaporative demand over a specified surface. It is not automatically the actual water loss from a field, forest, or catchment.

The broader term potential evapotranspiration refers to evapotranspiration under specified conditions of unrestricted water availability, but its surface definition varies among methods. It should therefore not always be treated as synonymous with ET0ET_0.

For crops under standard, non-stressed conditions, evapotranspiration is commonly estimated using

ETc=KcET0,ET_c=K_cET_0,

where KcK_c is a crop coefficient representing crop type, growth stage, and related surface properties. Water stress and separate soil-evaporation effects require additional treatment. Alternatively, the general Penman–Monteith equation can estimate actual fluxes when appropriate, time-varying surface properties and resistances are supplied.

Data requirements and applications

Typical inputs are air temperature, humidity, wind speed, and solar or net radiation. Atmospheric pressure, often estimated from elevation, is needed for pressure-dependent quantities. Net radiation may be measured or estimated from shortwave radiation, surface reflectance, and longwave radiation exchange.

The equation is used in:

  • Agricultural water management: estimating crop water use and supporting irrigation calculations.
  • Catchment hydrology: representing evaporative losses in a water balance alongside precipitation, runoff, and storage changes.
  • Drought assessment: estimating atmospheric evaporative demand as one component of some drought indicators.
  • Land-surface modelling: calculating exchanges between vegetation, soil, and atmosphere within an Earth system model.
  • Spatial analysis: mapping evapotranspiration demand from weather-station or gridded meteorological data.

Reference evapotranspiration alone is not an irrigation requirement. Effective rainfall, soil-water storage, crop development, management objectives, and irrigation-system losses also affect water requirements.

Assumptions, limitations, and uncertainty

Effective single-surface representation

The general equation is often implemented as a “big-leaf” model, treating the canopy and underlying surface as one effective source. Sparse vegetation, patchy wetting, and strong contrasts between soil and canopy temperature can violate this simplification. Two-source or multilayer models represent these components separately.

Resistance uncertainty

Actual evapotranspiration estimates can be highly sensitive to surface resistance, which is difficult to measure at landscape scale. Using a fixed, well-watered resistance for drought-stressed vegetation can overestimate water loss. Conversely, reference-surface resistance is intentionally fixed: departures of real vegetation from the reference do not invalidate the reference index.

Meteorological data and averaging

Poor radiation estimates, incorrect wind measurement heights, humidity errors, and unrepresentative station exposure can substantially affect results. Nonlinear relationships mean that calculations from monthly mean inputs need not equal the average of daily calculations.

Advection, storage, and turbulence

Hot, dry air moving over a wet surface can supply additional energy through downward sensible heat transfer, allowing latent heat flux to exceed local net radiation minus ground heat flux. The equation can represent aspects of such conditions through its aerodynamic term, but strong horizontal heterogeneity may challenge its assumptions.

Heat storage can also be important in deep water, substantial vegetation canopies, and short time steps. Very weak turbulence and strongly stable atmospheric conditions complicate the resistance representation.

Climatic interpretation and validation

Changes in calculated ET0ET_0 reflect the combined effects of temperature, radiation, humidity, and wind. They do not by themselves establish changes in actual ecosystem water consumption. Under climate change, soil-water limitations, vegetation changes, and plant responses to atmospheric carbon dioxide can alter actual evapotranspiration independently of the standardized reference calculation.

Evaluation may use a lysimeter, eddy covariance, or catchment water-balance observations. These methods sample different spatial scales and have their own uncertainties, so comparisons require compatible surface conditions, averaging periods, and definitions of the measured flux.