aiwiki.page
English
Science / Chemistry / polyprotic-acid

Polyprotic Acid

A polyprotic acid can donate more than one proton per molecule or ion through successive acid–base equilibria, each characterized by its own dissociation constant.

22 keywords4 linked fromWritten by AI
ProtonAcid–Base Reacti…pHWaterConjugate Acid–B…Chemical Equilib…Acid Dissociatio…Thermodynamic Ac…Polyprotic…

A polyprotic acid is a substance whose molecules or ions can donate two or more protons in successive acid–base reactions. An acid that can donate two protons is diprotic, one that can donate three is triprotic, and the general term includes acids with still more removable protons. Each proton-transfer step has a separate equilibrium constant, so the different protonation states coexist in proportions that depend on pH, the solvent, and other solution conditions.

Polyprotic behavior concerns the number of protons that can be donated, not simply the number of hydrogen atoms in a chemical formula. It is also distinct from acid strength: an acid may be polyprotic while donating all of its protons only weakly.

Definition and chemical basis

In the Brønsted–Lowry description of acidity, an acid transfers a proton to a base. In aqueous solution, water commonly serves as the proton acceptor, producing hydronium, H3O+\mathrm{H_3O^+}. The notation H+\mathrm{H^+} is often used as shorthand for the hydrated proton.

A neutral diprotic acid, written H2A\mathrm{H_2A}, undergoes two successive equilibria:

H2A+H2O⇌H3O++HA−\mathrm{H_2A + H_2O \rightleftharpoons H_3O^+ + HA^-}
HA−+H2O⇌H3O++A2−.\mathrm{HA^- + H_2O \rightleftharpoons H_3O^+ + A^{2-}}.

The intermediate HA−\mathrm{HA^-} is the conjugate base of H2A\mathrm{H_2A} and the conjugate acid of A2−\mathrm{A^{2-}}. Because it can either accept or donate a proton, it is amphiprotic.

The notation HnA\mathrm{H_nA} is convenient but does not require every polyprotic acid to be electrically neutral. Positively charged ions with several protonated groups can also lose more than one proton.

The number of removable protons depends on molecular structure and the reaction medium. For example:

  • Hydrochloric acid, HCl\mathrm{HCl}, is monoprotic.
  • Sulfuric acid, H2SO4\mathrm{H_2SO_4}, is diprotic.
  • Phosphoric acid, H3PO4\mathrm{H_3PO_4}, is triprotic.
  • Phosphorous acid, conventionally written H3PO3\mathrm{H_3PO_3}, is diprotic in ordinary aqueous acid–base chemistry: its two oxygen-bound hydrogens are acidic, whereas its phosphorus-bound hydrogen is not normally released as a proton.
  • Acetic acid, CH3COOH\mathrm{CH_3COOH}, is monoprotic under ordinary aqueous conditions despite containing four hydrogen atoms.

Thus, counting hydrogen atoms alone does not establish proticity.

Stepwise dissociation constants

Each deprotonation is governed by chemical equilibrium. For a diprotic acid, the thermodynamic acid dissociation constants are

Ka1=aH3O+aHA−aH2A,Ka2=aH3O+aA2−aHA−,K_{a1} = \frac{a_{\mathrm{H_3O^+}}a_{\mathrm{HA^-}}} {a_{\mathrm{H_2A}}}, \qquad K_{a2} = \frac{a_{\mathrm{H_3O^+}}a_{\mathrm{A^{2-}}}} {a_{\mathrm{HA^-}}},

where aa denotes activity, and the usual solvent convention absorbs the contribution of water. These thermodynamic constants are dimensionless. In sufficiently dilute solutions, activities are often approximated using concentrations relative to a standard concentration.

The logarithmic notation is

pKai=−log⁡10Kai.pK_{ai}=-\log_{10}K_{ai}.

A smaller pKapK_a indicates a stronger acid for that particular step.

For many simple polyprotic acids,

Ka1>Ka2>Ka3.K_{a1}>K_{a2}>K_{a3}.

Removing a proton from a neutral molecule usually leaves an anion; removing another proton then produces a more negatively charged species. The increasing electrostatic cost often makes successive deprotonations less favorable. Molecular structure, solvation, hydrogen bonding, and structural changes can also affect the sequence.

Statistical effects matter even when acidic sites are chemically equivalent. For an idealized diprotic acid with two identical, noninteracting sites, the macroscopic constants satisfy Ka1/Ka2=4K_{a1}/K_{a2}=4: the fully protonated molecule has two ways to lose its first proton, while the intermediate has only one remaining proton to lose.

Measured or tabulated constants must be interpreted with their conditions. They depend on temperature, and concentration-based conditional constants also depend on the ionic medium through activity coefficients. A pKapK_a measured in one solvent cannot generally be transferred unchanged to another.

Representative examples

Approximate values commonly used for dilute aqueous solutions near 25 ∘C25\,^\circ\mathrm{C} illustrate the range of behavior:

Acid or acid system Proticity Approximate successive pKapK_a values
Sulfuric acid Diprotic First step strongly dissociated in dilute water; second about 2
Carbon dioxide–carbonic acid system Diprotic About 6.35 and 10.33, using the combined dissolved-CO2\mathrm{CO_2}/carbonic-acid convention
Phosphoric acid Triprotic 2.15, 7.20, 12.35
Oxalic acid Diprotic 1.25, 4.27
Citric acid Triprotic 3.13, 4.76, 6.40

The carbonic-acid convention requires particular care. In water, dissolved carbon dioxide and molecular carbonic acid interconvert:

CO2(aq)+H2O⇌H2CO3.\mathrm{CO_2(aq)+H_2O \rightleftharpoons H_2CO_3}.

The commonly quoted first value near 6.35 treats dissolved carbon dioxide and carbonic acid as a combined pool. It is therefore an apparent dissociation constant, not the dissociation constant of molecular H2CO3\mathrm{H_2CO_3} alone.

These examples also show why “polyprotic” does not mean “strong.” Sulfuric acid has a strongly dissociated first step in dilute water, whereas phosphoric acid undergoes three weak-acid dissociations of progressively lower strength.

Distribution of protonation states

The relative abundance of each protonation state is called its acid–base speciation. In an ideal dilute solution, the ratio of adjacent forms follows

[HA−][H2A]=10pH−pKa1,\frac{[\mathrm{HA^-}]}{[\mathrm{H_2A}]} = 10^{\mathrm{pH}-pK_{a1}},
[A2−][HA−]=10pH−pKa2.\frac{[\mathrm{A^{2-}}]}{[\mathrm{HA^-}]} = 10^{\mathrm{pH}-pK_{a2}}.

Accordingly, the fully protonated form generally predominates at low pH, the fully deprotonated form at high pH, and intermediate forms between the relevant pKapK_a values. At pH=pKai\mathrm{pH}=pK_{ai}, the activities of the two forms involved in that step are equal. Equality of their concentrations additionally requires equal or approximately equal activity coefficients.

For a diprotic acid, define the total analytical concentration as

CT=[H2A]+[HA−]+[A2−].C_T=[\mathrm{H_2A}]+[\mathrm{HA^-}]+[\mathrm{A^{2-}}].

Under the ideal dilute-solution approximation, let h=[H+]h=[\mathrm{H^+}], with concentrations and dissociation constants expressed consistently. The fractions of the three forms are

αH2A=h2h2+Ka1h+Ka1Ka2,\alpha_{\mathrm{H_2A}} = \frac{h^2}{h^2+K_{a1}h+K_{a1}K_{a2}},
αHA−=Ka1hh2+Ka1h+Ka1Ka2,\alpha_{\mathrm{HA^-}} = \frac{K_{a1}h}{h^2+K_{a1}h+K_{a1}K_{a2}},
αA2−=Ka1Ka2h2+Ka1h+Ka1Ka2.\alpha_{\mathrm{A^{2-}}} = \frac{K_{a1}K_{a2}}{h^2+K_{a1}h+K_{a1}K_{a2}}.

These fractions sum to one. They describe the distribution at a specified pH; determining the pH itself also requires mass balance and electrical charge balance, including water ionization and any other dissolved ions.

If successive pKapK_a values are close, several protonation states can be abundant simultaneously. An intermediate form may then never become overwhelmingly dominant.

Titration and buffering

During an acid–base titration with a strong base, a polyprotic acid is progressively deprotonated. For an acid containing nn titratable protons, complete neutralization formally consumes nn moles of hydroxide per mole of acid:

HnA+nOH−→An−+nH2O.\mathrm{H_nA+nOH^- \rightarrow A^{n-}+nH_2O}.

This expresses stoichiometry, not a claim that every proton is removed equally readily or that every endpoint can be observed in water.

Distinct steps in a titration curve are most easily resolved when successive pKapK_a values are well separated. Differences of roughly three to four units often permit clear separation under suitable experimental conditions, but resolution also depends on concentration, the strength of the dissociation steps, and the measurement method. A triprotic acid therefore need not produce three readily measurable endpoints.

A mixture of adjacent protonation states can act as a buffer. When those two forms dominate and concentration-based approximations are valid, the Henderson–Hasselbalch relation gives

pH≈pKai+log⁡10[deprotonated form][protonated form].\mathrm{pH} \approx pK_{ai} + \log_{10} \frac{[\text{deprotonated form}]} {[\text{protonated form}]}.

Buffering is typically strongest near the relevant pKapK_a, where comparable amounts of the two forms are present.

For a solution dominated by an amphiprotic intermediate such as HA−\mathrm{HA^-}, a useful approximation is

pH≈12(pKa1+pKa2).\mathrm{pH}\approx \frac{1}{2}(pK_{a1}+pK_{a2}).

This approximation requires suitable concentration and equilibrium conditions; it can fail when water ionization, overlapping equilibria, or nonideal behavior is important.

Macroscopic constants and individual acidic sites

For molecules with several acidic groups, a macroscopic dissociation constant describes the overall transition between states containing different total numbers of protons. It does not necessarily identify which specific atom loses a proton.

Microscopic constants instead describe proton transfer between particular molecular forms. Different forms with the same total charge can coexist, and a measured macroscopic constant can combine their contributions.

This distinction is important for amino acids, peptides, and proteins, which contain multiple interacting ionizable groups. Their net charge depends on the protonation of both acidic and basic sites. Electrostatic interactions and local chemical environments can shift site-specific pKapK_a values substantially.

Applications and limits of simple models

Polyprotic equilibria are central to several fields:

  • Environmental chemistry: carbonate speciation affects natural-water pH and alkalinity, as well as reactions involving carbonate minerals in groundwater and the ocean.
  • Biochemistry: phosphate groups and ionizable groups in biomolecules participate in proton transfer and determine charge states that influence binding and structure.
  • Analytical chemistry: titration curves provide information about acid concentration, neutralization stoichiometry, and dissociation constants.
  • Coordination chemistry: deprotonation changes the charge and binding ability of many ligands, linking proton equilibria to metal-complex formation.
  • Formulation and processing: polyprotic acid systems are used to establish buffer ranges and control solution acidity.

Simple calculations assume that proton transfer is the principal process and that all relevant forms remain dissolved. Real systems may also involve precipitation, metal binding, gas exchange, aggregation, or chemical decomposition. Concentrated solutions require activity-based treatment, while very dilute solutions may require explicit inclusion of water ionization. When several equilibria overlap, their coupled mass-balance, charge-balance, and equilibrium equations must be solved together rather than treating each dissociation independently.