The acid dissociation constant, denoted , is an equilibrium constant that describes the transfer of a proton from an acid to a solvent or other specified proton acceptor. It measures acid strength within a defined chemical medium: a larger indicates a greater tendency to donate a proton. Its logarithmic form, , is more commonly tabulated; a lower therefore indicates a stronger acid. The value depends on the solvent, temperature, and the conventions used to describe the equilibrium.
Definition and thermodynamic basis
In an aqueous acid–base reaction, an acid transfers a proton to water:
Here, is the acid’s conjugate base, and represents the hydrated proton in a simplified chemical notation. Acids need not be electrically neutral: a positively charged species can lose a proton to form a neutral conjugate base, and a negatively charged species can lose one to form a more negatively charged species.
For the reaction as written, the thermodynamic equilibrium constant is
where is the thermodynamic activity of species . In dilute aqueous solutions, the activity of water is approximately unity. The acid dissociation constant is consequently usually written
using the conventional aqueous notation . In concentrated solutions, water activity and the precise equilibrium convention require explicit attention.
Thermodynamic activities are dimensionless, so the thermodynamic is also dimensionless. For a solute described using a concentration-based standard state,
where is its molar concentration, is the standard concentration, usually , and is its activity coefficient.
The connection to Gibbs free energy is
or equivalently,
with the gas constant and the absolute temperature. Thus, expresses the standard free-energy change of proton dissociation on a logarithmic scale.
Interpretation of K_\mathrm{a} and \mathrm{p}K_\mathrm{a}
A difference of one unit corresponds to a tenfold difference in ; a difference of three units corresponds to a thousandfold difference. These comparisons are meaningful only when the values refer to compatible solvents, temperatures, and standard-state conventions.
For orientation, approximate aqueous values near include:
| Acid | Conjugate base | Approximate |
|---|---|---|
| Acetic acid | Acetate | 4.76 |
| Ammonium ion | Ammonia | 9.25 |
| Phenol | Phenoxide | 10.0 |
An acid’s dissociation constant is not the same as its degree of dissociation, the fraction of acid present in deprotonated form. The latter also depends on concentration and on the other substances in solution. A weak acid can be substantially dissociated at sufficiently low concentration.
Likewise, acid strength is distinct from solution pH. Acid strength describes an equilibrium property of an acid in a specified medium; pH describes hydrogen-ion activity in a particular solution. Concentration, other acid–base equilibria, and dissolved salts all influence pH.
Relation to pH and buffer solutions
Rearranging the activity expression gives
This is the activity-based form of the Henderson–Hasselbalch equation. In sufficiently dilute solutions, or where relevant activity-coefficient effects are accounted for, it is commonly approximated as
Consequently:
- At , the acid and conjugate base have equal activities.
- One pH unit above , the conjugate-base-to-acid activity ratio is .
- One pH unit below , that ratio is .
A buffer solution containing appreciable amounts of both forms resists pH change because the conjugate base consumes added acid, while the acid consumes added base. For a simple conjugate pair at fixed total concentration, buffering is most effective near . The buffer’s capacity also depends strongly on its total concentration.
For an isolated monoprotic weak acid of analytical concentration , an elementary approximation is
Here concentrations are understood as numerical values in under the usual dilute-solution convention. The approximation requires dissociation to be small relative to , activity effects to be negligible, and water’s contribution to hydrogen-ion concentration to be insignificant. Outside these conditions, mass balance, charge balance, and the relevant equilibrium equations must be solved together.
Conjugate bases and proton-transfer equilibria
The base dissociation constant describes a conjugate base reacting with water:
Under consistent aqueous conventions,
where is the ionic product of water. Therefore,
In dilute water near , is approximately 14.00. A stronger acid consequently has a weaker conjugate base.
Differences in also predict proton-transfer equilibria. For
the equilibrium constant is
provided both values use the same medium and compatible conventions. Equilibrium favors the side containing the weaker acid and weaker base. This predicts equilibrium position, not reaction speed, which is a separate subject of chemical kinetics.
Polyprotic acids and multiple sites
A polyprotic acid can lose more than one proton in successive steps. For a diprotic acid,
Each step has its own constant. For many simple polyprotic acids, successive proton loss becomes less favorable, so . Electrostatic effects and the number of available protonation sites both contribute.
The constants determine the proportions of protonation states at any pH. In the dilute-solution approximation, define and
The fractions of total acid present as , , and are then
Molecules with several proton-binding sites require a further distinction:
- Macroscopic constants describe equilibria between total populations with different numbers of bound protons.
- Microscopic constants describe proton transfer at particular sites within specified molecular states.
A measured macroscopic cannot always be assigned uniquely to one atom. This is especially important for amino acids, complex organic compounds, and proteins, where protonation sites can interact.
Factors affecting acid strength
Acid dissociation reflects the free-energy difference between the acid and its solvated products. Several structural and environmental effects contribute.
Electronic effects. Electron-withdrawing substituents can stabilize a conjugate base and lower . Delocalization described by resonance can also stabilize the conjugate base, as in carboxylate ions.
Bonding and atomic properties. Bond strength, atomic size, polarizability, electronegativity, and orbital structure influence the relative stability of protonated and deprotonated forms. No single structural rule predicts all acidity trends.
Solvation. A solvent can stabilize the acid, conjugate base, and transferred proton to different extents. Hydrogen bonding, dielectric response, and specific solvent interactions can produce large shifts in .
Local molecular environment. Nearby charges, metal binding, restricted solvent access, and conformational changes can alter acidity. Protein-bound groups may therefore have values substantially different from those of analogous small molecules in water.
Temperature. The temperature dependence follows the van ’t Hoff relation,
where is the standard dissociation enthalpy. The direction of the change depends on the sign of that enthalpy.
Measurement and reported values
Acid dissociation constants are commonly determined using analytical chemistry methods such as:
- Potentiometric titration: measuring pH as a known amount of acid or base is added, then fitting an equilibrium model.
- Spectrophotometric titration: using changes in absorption spectra to distinguish protonation states.
- Nuclear magnetic resonance titration: following pH-dependent chemical shifts with nuclear magnetic resonance.
- Conductometric measurements: measuring conductivity changes associated with the formation or redistribution of ions.
For a simple weak-acid–strong-base titration, the pH at half-neutralization is approximately equal to . Activity effects, overlapping dissociation steps, and competing reactions can limit this shortcut.
Thermodynamic constants are distinguished from conditional or apparent constants, which apply to specified experimental conditions. A concentration-based constant measured at fixed salt concentration generally includes activity-coefficient effects. Ionic strength, a measure of dissolved-ion concentration weighted by squared charge, is therefore an important reporting condition.
Experimental interpretation may also be complicated by low solubility, ion pairing, aggregation, metal complexation, decomposition, or slow equilibration. A useful reported value identifies the solvent composition, temperature, activity or concentration convention, and relevant ionic medium.
Solvent dependence and limits of comparison
An aqueous is not a universal solvent-independent property. Transferring an acid to another solvent changes the relative stabilization of all participating species. Values in water, dimethyl sulfoxide, acetonitrile, and other solvents belong to different acidity scales and cannot generally be compared directly.
Water also exhibits a leveling effect: acids sufficiently strong to transfer their protons essentially completely to water all produce hydrated protons. Their relative strengths are not readily distinguished by ordinary dilute aqueous titration. Other solvents or specialized thermodynamic methods are needed to differentiate them.
Gas-phase acidity is a different quantity, usually expressed through the free-energy change for gas-phase proton loss rather than an aqueous . Acid dissociation constants also specifically concern proton-transfer acidity; they do not by themselves measure Lewis acidity, which concerns electron-pair acceptance.
Applications
Acid dissociation constants are used to calculate protonation-state distributions, select buffer systems, interpret titration curves, and predict acid–base equilibrium positions. In organic chemistry, they help identify feasible proton-transfer steps and compare the basicity of reagents.
In biological chemistry, protonation states influence enzyme catalysis, molecular binding, and protein charge. In environmental chemistry, acidity constants help describe dissolved inorganic carbon, nutrient forms, and metal binding. Separation methods such as chromatography also exploit pH-dependent changes in molecular charge.
These applications require the constants to be combined with the relevant mass balances, charge balance, and other equilibria. A alone does not determine solubility, permeability, reaction rate, or the complete behavior of a substance in a complex mixture.