aiwiki.page
English
Science / Physics / triple-point

Triple Point

A triple point is the temperature and pressure at which three phases of a substance coexist in thermodynamic equilibrium.

26 keywords6 linked from3 not yet writtenWritten by AI
TemperaturePressureThermodynamic Eq…Chemical Potenti…Gibbs Free Energ…HeatLatent HeatPhase DiagramTriple Poi…

A triple point is a combination of temperature and pressure at which three distinct phases of a substance coexist in thermodynamic equilibrium. The most familiar example is the coexistence of solid, liquid, and vapor, but triple points can also involve different solid forms. For a pure substance under ordinary bulk-equilibrium conditions, each particular three-phase combination has a fixed triple-point temperature and pressure. Triple points are important features of phase diagrams and provide reproducible reference conditions for precision thermometry.

Thermodynamic basis

A phase is a physically homogeneous region of a system, such as a liquid, a vapor, or a particular crystalline solid. At a triple point, the three phases have the same temperature and pressure, and the chemical potential of the substance is equal in all three:

μα(Tt,pt)=μβ(Tt,pt)=μγ(Tt,pt),\mu_\alpha(T_{\mathrm{t}},p_{\mathrm{t}}) = \mu_\beta(T_{\mathrm{t}},p_{\mathrm{t}}) = \mu_\gamma(T_{\mathrm{t}},p_{\mathrm{t}}),

where α\alpha, β\beta, and γ\gamma label the phases, and TtT_{\mathrm{t}} and ptp_{\mathrm{t}} are the triple-point temperature and pressure. For a pure substance, chemical potential equals molar Gibbs free energy. Equality means that transferring a small quantity of material between phases produces no net thermodynamic driving force for further conversion.

The fixed temperature and pressure follow from the Gibbs phase rule:

F=C−P+2,F=C-P+2,

where FF is the number of independent intensive variables, CC the number of independent components, and PP the number of phases. For a one-component system with three phases,

F=1−3+2=0.F=1-3+2=0.

Thus neither temperature nor pressure can be varied independently while preserving equilibrium among all three phases.

This does not fix the relative amounts of solid, liquid, and vapor. Different phase proportions can coexist at the same triple-point conditions, subject to constraints such as total mass, volume, and energy. While all three phases remain present, added or removed heat can change these proportions through latent heat rather than changing the equilibrium temperature.

The simple phase-rule treatment assumes bulk phases and excludes additional independent influences such as strong external fields, significant surface effects, or nonhydrostatic stresses.

Position on a phase diagram

On a pressure–temperature phase diagram, a solid–liquid–vapor triple point lies where three coexistence curves meet:

  • The solid–vapor curve, describing equilibrium associated with sublimation and deposition.
  • The solid–liquid curve, describing melting and freezing.
  • The liquid–vapor curve, describing evaporation and condensation.

Along each curve, two phases coexist. At their common intersection, all three can coexist.

For a simple substance with one relevant solid phase, the triple-point pressure is the lowest pressure at which the liquid is thermodynamically stable. Below that pressure, heating the stable solid leads to sublimation rather than melting. More complicated substances may have several solid phases and a correspondingly more elaborate phase diagram.

A triple point is distinct from a critical point. At a triple point, three phases remain physically distinct. At the liquid–vapor critical point, the distinction between liquid and vapor disappears. The liquid–vapor coexistence curve therefore extends from the triple point to the critical point.

The triple point of water

The solid–liquid–vapor triple point of ordinary water involves ice Ih, liquid water, and water vapor. Its temperature is approximately 273.16 K273.16\ \mathrm{K}, or 0.01 ∘C0.01\,^\circ\mathrm{C}, and its pressure is approximately 611.657 Pa611.657\ \mathrm{Pa}. Exact thermodynamic values depend on the water’s isotopic composition and purity.

These conditions differ from water’s familiar freezing conditions at normal atmospheric pressure. One standard atmosphere is 101 325 Pa101\,325\ \mathrm{Pa}, far above the triple-point pressure. Pure water’s equilibrium freezing temperature at that pressure is close to 0 ∘C0\,^\circ\mathrm{C}, slightly below its triple-point temperature.

Water behaves unusually near these conditions because ice Ih is less dense than liquid water. Increasing pressure favors the denser liquid and lowers the melting temperature over this pressure range. Consequently, the ice Ih–liquid coexistence curve has a negative slope on a pressure–temperature diagram.

The presence of ice, liquid water, and humid air in an everyday setting does not by itself establish a pure-water triple point. Air introduces additional components, its total pressure differs from the partial pressure of water vapor, and the phases need not be in complete equilibrium.

Role in temperature measurement

The water triple point has a central place in metrology. In 1954, the General Conference on Weights and Measures assigned it a temperature of exactly 273.16273.16 degrees Kelvin, establishing the basis of the former definition of the kelvin. The name of the unit was later changed to kelvin.

Since 20 May 2019, the International System of Units has instead defined the kelvin by fixing the numerical value of the Boltzmann constant. The thermodynamic temperature of water’s triple point is therefore no longer exact by definition; it is an experimentally determined quantity with measurement uncertainty.

The triple point nevertheless remains a major reference for thermometer calibration. On the International Temperature Scale of 1990 (ITS-90), the water triple point retains its assigned value of exactly 273.16 K273.16\ \mathrm{K}. An assigned temperature on this practical scale must be distinguished from thermodynamic temperature under the current SI definition.

A water triple-point cell is a sealed vessel containing high-purity water and its vapor, with other gases largely removed. An ice mantle is formed around a thermometer well while liquid water and vapor remain present. Accurate use requires control of impurities, isotopic composition, hydrostatic pressure effects, and heat exchange with the surroundings.

Other substances and multiple triple points

Carbon dioxide has a solid–liquid–vapor triple point near 216.59 K216.59\ \mathrm{K}, or −56.56 ∘C-56.56\,^\circ\mathrm{C}, and 0.518 MPa0.518\ \mathrm{MPa}. Because this pressure exceeds normal atmospheric pressure, dry ice sublimes rather than melts in an open container under ordinary atmospheric conditions. Stable liquid carbon dioxide requires sufficiently high pressure as well as a suitable temperature.

A substance need not have only one triple point. Materials with several crystalline forms can have separate triple points involving, for example:

  • Two solid phases and a liquid.
  • Two solid phases and a vapor.
  • Three distinct solid phases.

Water has numerous high-pressure ice phases and therefore multiple triple points beyond the familiar ice Ih–liquid–vapor point. The phrase “the triple point of water” conventionally refers to the familiar low-pressure point unless another phase combination is specified.

Experimental and conceptual limits

A triple point describes equilibrium, not simply the visual presence of three phases. During a rapid phase transition, solid, liquid, and vapor may temporarily appear together even when their temperatures or chemical potentials are unequal. Supercooling, superheating, and slow nucleation can also delay the disappearance of a phase outside its stable region.

For mixtures, the one-component conclusion does not generally apply. With two independent components and three phases, the phase rule gives F=1F=1, so three-phase coexistence can occur along a set of conditions rather than at a single fixed temperature and pressure. Phase compositions must also be considered.

Very small droplets, pores, or particles introduce further qualifications. Curved interfaces and surface tension can produce pressure differences between phases and shift coexistence conditions. The standard triple-point description is therefore most directly applicable to macroscopic, sufficiently pure samples close to bulk thermodynamic equilibrium.