A rotor is the rotating component or assembly of a machine. Depending on the application, it may consist of a shaft, discs, blades, windings, magnets, or other parts that turn together about an axis. Rotors transmit power, exchange energy with fluids or electromagnetic fields, produce lift or thrust, or store rotational energy. The term is especially common in electrical machines, turbines, compressors, helicopters, and centrifuges. In many machines, the rotor operates within or alongside a stationary assembly called a stator.
Structure and operating principles
A rotor is defined by its motion and function rather than by a particular shape. It may be a nearly solid cylinder, an assembly of bladed discs, a set of electromagnetic components attached to a shaft, or a hub carrying long, flexible blades. Some machines have several independently rotating assemblies.
Most rotors are supported by bearings, which constrain their motion while allowing rotation. A ball bearing uses rolling elements, whereas a fluid-film bearing supports the shaft on a pressurized or motion-generated film of liquid or gas. Magnetic bearings support a rotor through magnetic forces. The bearing arrangement determines how radial and axial loads are transmitted to the stationary structure.
Rotors may be mounted on horizontal or vertical shafts, located inside or outside a stationary component, or arranged concentrically around another rotor. A shaft is not essential in every design: some rotating rings or drums are supported around their circumference.
Torque, power, and stored energy
A rotor transmits mechanical power through torque. For rotation about a fixed axis,
where is mechanical power, is torque, and is angular velocity. At a given power, a higher rotational speed corresponds to a lower torque.
The kinetic energy stored in a rigid rotor rotating about a fixed axis is
where is its moment of inertia about that axis. Mass farther from the axis contributes more strongly to . This makes rotor geometry important in flywheels and other systems for energy storage.
For a rigid rotor with constant moment of inertia, its angular acceleration satisfies
Driving torque, load torque, friction, and aerodynamic resistance together determine whether the rotor accelerates, decelerates, or maintains a steady speed.
Rotors in electrical machines
In an electric motor, electromagnetic interactions produce torque that drives the rotor. In an electric generator, mechanical power drives the rotor and is converted into electrical power. Many electrical machines can operate in either mode.
The rotor and stator are generally separated by a narrow air gap. Energy conversion depends on the interaction of their magnetic fields, although the arrangement of magnets, conductors, and windings differs among machine types.
Induction-machine rotors
An induction motor develops rotor currents through electromagnetic induction. Its two principal rotor constructions are:
- Squirrel-cage rotor: conductive bars run through a laminated magnetic core and are joined by conducting end rings. The bars and rings form closed electrical paths without external connections to the rotor circuit.
- Wound rotor: insulated windings are connected to slip rings, allowing external equipment to interact electrically with the rotor circuit. Depending on the system, this can support starting control, speed control, or power conversion.
In ordinary induction-motor operation, the rotor turns more slowly than the stator’s rotating magnetic field. This speed difference, called slip, permits induced currents and torque production. In generating operation, the rotor can turn faster than the field’s synchronous speed.
Synchronous-machine rotors
In a synchronous machine, the rotor turns in step with the rotating magnetic field during steady operation. Rotor magnetization may be provided by permanent magnets, electrically excited field windings, or a magnetic structure whose directional differences in reluctance produce torque.
Two common wound-field constructions are:
- Salient-pole rotors, with projecting magnetic poles, often used in relatively low-speed machines.
- Cylindrical or round rotors, with field windings housed in slots in an approximately cylindrical body, commonly used in high-speed turbine-driven generators.
A brushless DC motor usually has a permanent-magnet rotor and electronically switched stator windings. “Brushless DC” describes a machine and control arrangement; it does not imply that direct current is supplied to the rotor.
Commutator-machine rotors
In a conventional brushed DC motor, the rotor carries the armature winding. A commutator and stationary brushes switch the winding connections as the rotor turns, maintaining torque in the required direction.
The term armature is not synonymous with rotor. It identifies an electrical function: in many large synchronous generators, the armature winding is stationary and the rotating part carries the magnetic field.
Rotors in fluid machinery
In fluid machinery, a rotor exchanges energy with a flowing liquid or gas. Its blades or passages change the fluid’s velocity and angular momentum.
Turbines
A turbine rotor extracts energy from a fluid and delivers shaft power. In a steam turbine, steam expands through blade rows; in a gas turbine, hot combustion gases drive turbine blades. Hydraulic turbine rotors, often called runners, extract energy from flowing water in hydroelectric installations.
Stationary vanes or nozzles commonly direct the flow toward the rotating blades. A multistage turbine alternates stationary and rotating blade rows to distribute the energy conversion across several stages.
Pumps, compressors, and fans
Pumps, compressors, and fans transfer shaft energy to a fluid. Their rotors may be called impellers when the rotating component contains blades or passages that act on the flow.
In axial-flow machines, the fluid moves mainly along the rotational axis. In centrifugal machines, it moves outward through the impeller. Mixed-flow designs combine axial and radial motion. The rotor influences the pressure rise, flow rate, efficiency, and stable operating range.
A turbocharger couples an exhaust-driven turbine rotor to a compressor impeller through a common shaft. The two rotating components serve opposite energy-transfer roles: one extracts fluid energy, while the other adds it.
Wind turbines
A wind-turbine rotor typically consists of a hub and blades that convert aerodynamic forces into shaft torque. Its speed, diameter, blade shape, and blade pitch affect power extraction and structural loading. In wind power systems, the rotor may drive a generator directly or through a gearbox.
Aircraft rotors
A helicopter rotor is a hub-and-blade assembly that produces aerodynamic lift and, when tilted, a horizontal force for propulsion or maneuvering. Unlike a propeller used primarily for thrust, a helicopter’s main rotor normally supports most of the aircraft’s weight.
Rotor-blade pitch is commonly controlled in two ways:
- Collective pitch changes the pitch of all blades together, altering overall rotor loading.
- Cyclic pitch varies each blade’s pitch with its position around the rotor disc, changing the distribution of lift.
A conventional single-main-rotor helicopter uses a tail rotor to counter the main rotor’s reaction torque and control yaw. Other arrangements include coaxial, tandem, and intermeshing rotors. Multirotor aircraft typically control motion by varying the thrust of several rotors.
Helicopter rotors must accommodate changing aerodynamic loads as the blades advance and retreat relative to the aircraft’s motion. Depending on the design, hinges, elastic elements, or blade flexibility permit flapping and other movements.
Other uses
In a centrifuge, the rotor carries sample containers or process material around an axis. The required centripetal acceleration has magnitude
where is the distance from the axis. Rotor speed and radius therefore strongly affect separation performance and mechanical loading. Common laboratory designs include fixed-angle and swinging-bucket rotors.
A mechanical gyroscope uses a spinning rotor whose angular momentum underlies its response to applied torques. Flywheels use a rotor primarily to store kinetic energy, smooth power fluctuations, or provide short-duration power.
The rotating disc in a disc brake is also commonly called a rotor. Its role is to transmit braking torque and absorb and dissipate heat generated by friction.
Rotor dynamics and balancing
Rotor dynamics studies the vibration and stability of rotating assemblies, including their interaction with bearings, seals, supports, and surrounding fluids. A rotor that appears rigid at low speed may deform appreciably at operating speed.
Unbalance and critical speeds
A rotor is unbalanced when its mass distribution produces rotating forces or moments about the supported axis. For a simple eccentric mass, the force magnitude is
where is the mass and is its offset from the rotational axis. The square dependence on speed makes small eccentricities important in high-speed machines.
Balancing adjusts the mass distribution to reduce these forces and moments. Some rotors can be balanced in one plane; others require corrections in multiple planes or methods that account for flexible deformation.
A critical speed is an operating speed at which excitation associated with rotation coincides with a natural vibration mode of the rotor-bearing system. Resonant vibration may then increase substantially. Critical speeds depend on the entire supported assembly, not simply on shaft dimensions. Some flexible rotors are designed to pass through critical speeds during acceleration and operate above them.
Stability and gyroscopic effects
Rotating parts can undergo whirl, in which the shaft’s deflected centerline moves around its nominal axis. Whirl may result from forced vibration or from self-excited instability involving bearings, seals, internal friction, or fluid forces.
Gyroscopic effects couple tilting motions in different directions and alter vibration frequencies as rotational speed changes. These effects are significant in machinery such as turbines, aircraft engines, and high-speed spindles.
Materials, cooling, and reliability
Rotor materials are selected for strength, fatigue resistance, temperature capability, magnetic properties, corrosion resistance, and manufacturability. Electrical rotors often use laminated steel cores to reduce eddy-current losses. High-temperature turbine rotors and blades may use specialized alloys, while lightweight composite structures are used in some flywheels and aircraft blades.
Rotational stresses constrain allowable speed. For geometrically similar rotating bodies, characteristic stresses scale approximately with material density and the square of peripheral speed, though actual stresses depend strongly on geometry and construction. Blade attachments, bores, slots, and changes in shaft diameter can create local stress concentrations.
Cooling may use air, other gases, oil, or water, depending on the machine. In electrical rotors, losses in conductors and magnetic materials generate heat; in turbines, rotors may also receive heat from the working fluid. Thermal expansion must be accommodated without excessive distortion or contact between rotating and stationary parts.
Common failure mechanisms include fatigue cracking, bearing damage, overheating, blade damage, corrosion, and overspeed failure. Monitoring can combine vibration measurements, shaft-position probes, temperature measurements, and operating data from sensors. Protective systems may shut down machinery when speed, vibration, or temperature exceeds defined limits. High-energy rotors may also require containment structures designed to limit the consequences of component failure.