The normal force is the component of the contact force between two bodies that acts perpendicular to their surfaces at the point of contact. In classical mechanics, it describes how a floor supports an object, a wall resists a push, or a track guides a moving vehicle. The word normal means perpendicular; it does not mean ordinary or typical. A normal force is often denoted by or , and its magnitude is measured in newtons in the International System of Units.
Definition and direction
At a smooth contact point, the total contact force can be decomposed into perpendicular and tangential components:
where is a unit vector perpendicular to the surface, directed from the supporting body toward the body receiving the force, and is the tangential component. In elementary solid-contact problems, the tangential component is usually friction. An ideal frictionless surface exerts only a normal force.
The normal force need not point vertically upward. It is horizontal for an object pressed against a vertical wall, tilted for an object resting on a slope, and changes direction as an object travels along a curved surface. If a body touches several surfaces, each contact can exert a separate normal force.
For ordinary nonadhesive contact, the normal force is compressive: surfaces can push against one another but cannot pull one another together. Adhesive contacts require a more general model and may transmit tensile normal forces.
Physical origin
A surface that appears rigid deforms slightly when loaded. Interactions among its atoms oppose further compression, producing a distributed contact force whose perpendicular component is the normal force.
At the microscopic level, the resistance of ordinary solids to compression involves electromagnetic interactions and the quantum behavior of electrons, including the Pauli exclusion principle. It is therefore incomplete to describe support forces solely as electrostatic repulsion between two collections of charges.
In practical calculations, these microscopic processes are usually replaced by a model of elastic deformation or, more simply, an ideal rigid body. In the rigid-body approximation, the normal force is determined by the requirement that contacting bodies do not pass through each other, together with their equations of motion.
Determining the normal force
There is no universal formula . The normal force must be found from the forces, acceleration, and contact geometry of the particular system.
According to Newton’s second law,
where is the body’s mass and its acceleration in an inertial reference frame. Resolving this equation perpendicular to the contact surface gives
where the other force components and are signed along the chosen surface normal.
A free-body diagram helps keep the normal force distinct from weight, friction, applied forces, and forces exerted on other bodies.
Object on a horizontal surface
For an object resting on a horizontal surface, with no other vertical forces,
where is the local acceleration due to gravity.
This equality follows from zero vertical acceleration and the absence of other vertical forces; it is not part of the definition of normal force.
If an additional downward force of magnitude is applied while the object remains vertically stationary,
If an upward force is applied instead,
provided contact persists. If maintaining contact would require a negative value of , an ordinary nonadhesive surface cannot supply it: the object separates from the surface, and .
Object on an inclined plane
For a body on a fixed plane inclined at angle above the horizontal, with no other forces having a perpendicular component and no acceleration perpendicular to the plane,
The component of gravity parallel to the plane is . Friction may oppose sliding, but on an ideal plane it acts tangentially and does not directly enter the perpendicular force balance.
Accelerating elevator
For a person standing on a horizontal scale in an elevator, take upward as positive. If the person and elevator have vertical acceleration ,
so that
Upward acceleration increases the scale reading, while downward acceleration reduces it. In ideal free fall, and , even though gravity continues to act. The scale measures a support force, often called apparent weight, rather than gravitational attraction directly.
Curved motion
A body following a curved path generally has acceleration perpendicular to its instantaneous velocity. Consequently, the normal force may differ from the value obtained by balancing gravity alone.
At the bottom of a vertical circular path of radius , with the normal force directed upward toward the center,
giving
At the top of a convex circular hill, the normal force points upward while the required radial acceleration points downward:
These expressions assume that gravity and the normal force are the only forces with radial components. If the second expression would require , the body cannot remain on the hill without an additional retaining mechanism.
Relationship to friction
In the elementary dry-friction model, the maximum magnitude of static friction is
and the magnitude of sliding friction is approximately
where and are coefficients of static and kinetic friction.
Static friction is not always equal to . It adjusts to the value required to prevent relative sliding, up to that limiting value.
These relations are empirical approximations. Adhesion, lubrication, surface roughness, material deformation, temperature, and sliding speed can produce behavior that is not captured by a constant coefficient multiplied by the normal force.
Distributed contact, pressure, and torque
Real bodies generally touch over an area rather than at a mathematical point. The normal load is then distributed as a contact pressure . For a flat contact area , whose normal direction is uniform,
If the pressure is uniform, this reduces to . For a curved interface, local normals vary, and the resultant normal contact force is
The location and distribution of the contact forces also determine their torque. A normal force therefore need not act through a body’s center of mass. This matters in problems involving tipping, wheels, bearings, and structural supports.
Contact mechanics studies these distributions and the associated deformation. A rigid-body model can determine some resultant contact forces without resolving their distribution, but systems with several supports may require deformation and material properties to determine how the load is shared.
Work and energy
The instantaneous power delivered by a force to a body is the scalar product of the force and the velocity of its point of application. For ideal contact with a fixed, smooth, rigid surface, that velocity is tangential to the surface while the normal force is perpendicular to it. The normal force therefore does no work in this idealization.
A normal force does not, however, always do zero work. A moving platform can raise an object through its normal force, transferring energy to it. Deforming contacts can also store elastic energy or dissipate energy during impacts. The zero-work result depends on the motion and constraints of the contact, not simply on the force being called normal.
Distinction from weight and action–reaction forces
Weight and the normal force are different interactions. Gravity can act without contact; a normal force requires a contact interaction.
For a book resting on a table, the upward normal force and downward gravitational force balance, but they are not a Newton’s-third-law pair because both act on the book. The reaction partner of the table’s force on the book is the book’s force on the table. The reaction partner of Earth’s gravitational force on the book is the book’s gravitational force on Earth.
More generally, the normal forces two bodies exert on each other are equal in magnitude and opposite in direction. Whether either body is in equilibrium depends on all the forces acting on that body.