Kinetic friction is the force that acts tangentially between two surfaces sliding against one another and opposes their relative motion at the contact. It is a form of friction, distinguished from static friction, which acts between surfaces that are not slipping. In the simplest model for dry surfaces, its magnitude is proportional to the force pressing the surfaces together. This approximation is widely used in classical mechanics, although actual sliding resistance depends on the materials, surface condition, environment, and operating conditions.
Direction and distinction from static friction
Kinetic friction opposes the relative sliding velocity of the contacting surfaces, not necessarily the motion of either object relative to the ground. For example, a moving conveyor belt can exert a forward frictional force on a package that initially moves more slowly than the belt. The package accelerates even though the relative sliding motion is being resisted.
The frictional forces exerted by the two surfaces on one another are equal in magnitude and opposite in direction, in accordance with Newton’s third law.
Static friction acts when the contacting surfaces do not slide relative to each other. Its magnitude adjusts to the applied load, up to a limiting value. Once sliding begins, kinetic friction applies. For many dry material pairs, the kinetic friction force is smaller than the maximum static friction force, but this is not a universal rule.
Rolling without slipping is therefore not normally described by kinetic friction at the contact. A rolling object can experience static friction and rolling resistance; kinetic friction also appears if it skids.
The Coulomb model
For many dry contacts under moderate conditions, kinetic friction is approximated by
where:
- is the magnitude of the kinetic friction force;
- is the magnitude of the normal force, perpendicular to the contact surface;
- is the dimensionless coefficient of kinetic friction.
For nonzero relative tangential velocity , the force on one surface can be written as
with defined as that surface’s velocity relative to the other.
The normal force is not always equal to an object’s weight. For a body resting on a horizontal surface without other vertical forces, , where is its mass and is the local gravitational acceleration. On an inclined plane, in the absence of other forces perpendicular to the plane,
Additional applied forces or acceleration normal to the surface can change these expressions.
Empirical assumptions
The simple Coulomb model treats kinetic friction as approximately:
- proportional to normal load;
- independent of the apparent contact area;
- independent of sliding speed over a limited range.
These are empirical approximations, not fundamental laws. Their historical development is associated with Guillaume Amontons’s work on dry friction in the late seventeenth century and Charles-Augustin de Coulomb’s investigations in the eighteenth century.
The coefficient characterizes a pair of surfaces under specified conditions, rather than being an intrinsic constant of one material. Surface oxidation, contamination, roughness, humidity, temperature, and previous sliding can all affect it. Values greater than one are physically possible.
Microscopic origins
Surfaces that appear smooth generally make contact at small protrusions called asperities. The true area of contact can therefore be much smaller than the apparent geometric area.
Several processes contribute to sliding resistance:
- Adhesion: Microscopic junctions form where surfaces touch. Sliding requires these junctions to shear or separate.
- Deformation and ploughing: Hard protrusions or particles deform, indent, or cut into a softer surface.
- Internal dissipation: Deformation within a material, particularly rubber and other viscoelastic solids, can dissipate energy.
- Interfacial changes: Wear debris, transferred material, oxides, and other surface films can alter the contact during sliding.
A common explanation for approximate load proportionality is that the true contact area increases with normal load. If the average shear strength of the contact junctions remains roughly constant, the resulting tangential force also increases approximately in proportion to load.
Friction is consequently not explained solely by rough surfaces “catching” on one another. Adhesive interactions can be important even between very smooth surfaces. The broader study of friction, wear, and lubrication is called tribology.
Work and energy dissipation
When an object slides a distance over a stationary surface under a constant kinetic friction force, the work done by friction on the object is
If friction is the only force doing work, the object loses kinetic energy by this amount. For a block sliding freely on a horizontal surface with constant , its deceleration has magnitude , giving the stopping distance
where is its initial speed.
More generally, the rate at which the frictional force pair removes mechanical energy from relative sliding is
where is the relative sliding speed. This expression applies even when friction does positive work on one of the objects, as in the conveyor-belt example.
The dissipated energy largely becomes internal energy, producing heating, but some may also enter deformation, fracture, sound, and changes to the surfaces. Energy is conserved; what is lost is mechanical energy available for organized motion. The irreversible dissipation is associated with entropy production.
Measurement
A basic measurement pulls a specimen across another surface at constant speed while measuring the tangential force. If no other tangential forces act and acceleration is negligible, the measured pulling force equals the kinetic friction force, so
A tribometer provides controlled sliding geometry, load, speed, and environmental conditions. Common configurations include a pin sliding on a rotating disk and a specimen undergoing reciprocating motion.
Useful measurements specify the material pair, surface preparation, lubrication, load, speed, temperature, and sliding history. Initial “running-in” can change the surface condition, so a later steady value may differ from the friction measured when sliding first begins.
Applications and limitations
Kinetic friction is central to sliding brakes, friction clutches during engagement, sliding bearings, machining, and abrasive processes. It provides useful resistance in some applications but causes unwanted energy dissipation, heating, and wear in others.
Several circumstances require models more detailed than :
- Lubricated contacts: A fluid film may partly or completely separate the surfaces. Resistance can then depend strongly on viscosity, film thickness, and sliding speed.
- Soft materials: Large deformations and rate-dependent behavior can make friction depend substantially on load, apparent area, and speed.
- Very light loads or small contacts: Adhesion can remain significant even when the externally applied normal load is small.
- High speeds or temperatures: Heating, softening, chemical reactions, and changes in surface films can alter resistance.
- Unsteady sliding: Friction may depend on contact age and previous motion, not just instantaneous speed and load.
Alternation between sticking and slipping, known as stick–slip, can produce vibration and noise. It depends on both the contact behavior and the mechanical properties of the surrounding system; a difference between static and kinetic friction alone does not fully determine whether it occurs.