Tidal power is the generation of electricity from the periodic rise and fall of sea level or the currents produced by those movements. It is a form of renewable energy distinguished by the astronomical predictability of its resource. Unlike waves, which are generated principally by wind, tides arise mainly from the gravitational effects of the Moon and Sun, acting within the rotating Earth–ocean system.
Two principal approaches exploit this resource. Tidal-range systems enclose water behind a barrage or lagoon wall and generate electricity from a difference in water level. Tidal-stream systems place turbines in moving water without creating a large impoundment. Both convert mechanical energy into electrical energy, but their engineering requirements, environmental effects, and operating patterns differ substantially.
Tidal power has progressed from coastal mills to large generating stations and grid-connected turbine arrays. Its development is shaped by a central contrast: tidal motion can be forecast far in advance, but economically useful sites are geographically restricted, and equipment must operate in a demanding marine environment. Resource assessment, turbine design, coastal ecology, electricity-system integration, and financing therefore all influence whether a technically feasible project becomes a practical source of power.
Physical origins and distribution of the resource
Tides result from differences in gravitational acceleration across Earth, combined with the dynamics of the Earth–Moon system and the response of the oceans. The Moon produces the larger tide-generating influence despite the Sun’s much greater mass, because tidal forcing depends strongly on distance. Ocean basins, continental shelves, coastal geometry, friction, and Earth’s rotation transform this forcing into the local patterns observed along coastlines. Consequently, neither tidal range nor current speed can be inferred from latitude alone.
Many coastlines experience predominantly semidiurnal tides, with roughly two high waters and two low waters each lunar day. The principal lunar semidiurnal constituent, conventionally designated M2, has a period of approximately 12 hours 25 minutes. Other places have mainly diurnal or mixed tides. The changing alignment of the Sun, Moon, and Earth produces the spring–neap cycle: spring tides generally have larger ranges and stronger currents, while neap tides have smaller ranges and weaker currents. Additional astronomical cycles modulate the resource over longer periods.
Large tidal ranges develop where coastal geometry and basin dynamics amplify water-level oscillations. The Bay of Fundy in Canada is a prominent example, with the largest ranges at its head exceeding 15 metres during particularly large tides. Strong tidal streams occur where substantial volumes of water pass through narrow channels, around headlands, or between islands. The Pentland Firth north of mainland Scotland and passages in the Orkney Islands illustrate this channel-flow resource. A coastline with a large range does not necessarily contain a suitable turbine channel, and a strong-current site need not have an exceptionally large local range.
The two principal energy-conversion relationships reflect these different resources. For a simplified tidal basin of constant surface area , the potential energy associated with equalizing an initial head is
where is water density and is gravitational acceleration. This is an idealized estimate, not a prediction of actual station output; real sea level changes throughout operation, and basin area, losses, and turbine constraints matter.
For a turbine in a current, a common engineering expression is
where is rotor swept area, is a representative upstream velocity, is the power coefficient, and accounts for mechanical and electrical conversion losses. The cubic dependence on velocity makes accurate current measurements essential. Neither equation permits the unrestricted summation of device outputs across an entire estuary or channel, because extracting energy changes the surrounding flow.
Barrages, lagoons, and tidal-range operation
A tidal barrage spans an estuary or inlet and incorporates turbines, sluice gates, embankments, and sometimes navigation locks. By controlling exchanges between the enclosed basin and the sea, it creates a hydraulic head through which water can generate power. Tidal-range generation is therefore closely related to hydroelectricity, although the driving water-level cycle comes from the sea rather than sustained river inflow. Large tidal lagoons use a similar principle but enclose a coastal or offshore area rather than necessarily blocking an entire estuary.
In ebb-generation operation, sluices admit water as the tide rises. Near high water, the gates close and retain water while the external sea level falls. Generation begins once sufficient head develops, with water passing outward through the turbines. Output declines as the basin empties and the head changes. Flood generation reverses the arrangement: the basin is held relatively low, and the rising sea subsequently drives water inward through the machines.
Two-way generation produces electricity during both filling and emptying. This can spread production over more hours, but additional operating time does not automatically maximize annual energy or project revenue. Turbines may operate less efficiently at low head, and the timing of gate movements affects the head available later in the cycle. Reversible bulb turbines, in which the generator occupies a watertight housing within the water passage, are well suited to low-head applications. Their adjustable blades and guide vanes allow operation over changing hydraulic conditions.
Some schemes also use pumping near high or low water. Electricity is consumed to transfer additional water across a relatively small head, potentially increasing later generation at a larger head. Whether this improves net energy or financial value depends on timing, efficiencies, and electricity prices. Such operation resembles pumped-storage hydropower, but a tidal station remains constrained by the externally imposed sea-level cycle; it is not freely dispatchable in the same manner as a sufficiently large conventional storage reservoir.
A lagoon’s enclosing wall may allow designers to choose a location that avoids some effects of an estuary-spanning barrage, but it still changes water exchange, sediment movement, and habitat conditions. Wall length, foundation conditions, wave exposure, and the amount of enclosed water strongly affect cost. Dividing a project into multiple basins can provide more operational flexibility, but requires more civil works and generally involves a trade-off between smooth power delivery and maximum energy capture.
Tidal-range operation is consequently a scheduling problem as well as a hydraulic one. Operators select turbine starts, stops, gate openings, and pumping intervals using forecasts of sea level, equipment limits, environmental requirements, and electricity value. The schedule yielding the greatest annual energy need not be the schedule yielding the greatest revenue or the smallest ecological disturbance.
Tidal-stream turbines and alternative converters
Tidal-stream devices extract kinetic energy directly from moving water. The most extensively demonstrated designs use horizontal-axis rotors resembling those of wind turbines, although underwater machines operate in a much denser fluid and face different structural and maintenance constraints. A rotor drives an electric generator through a gearbox or a direct-drive arrangement. Electricity then passes through conversion and protection equipment before entering a subsea cable.
Water’s density, approximately 1,025 kilograms per cubic metre for typical seawater, permits substantial power capture from a relatively compact rotor. As an illustrative calculation, a rotor 20 metres in diameter has a swept area of about 314 square metres. At a uniform current speed of 3 metres per second, approximately 4.35 megawatts of kinetic power pass through that area. With a power coefficient of 0.4 and a further conversion efficiency of 0.9, the corresponding electrical output would be about 1.6 megawatts. This calculation excludes site-specific flow variation and does not imply continuous rated production.
Because tidal currents commonly reverse, turbines must accommodate both ebb and flood flow. Some rotate their nacelles to face the current; others reverse blade pitch or use rotor arrangements capable of accepting flow from either direction. Yaw control can also compensate for a current direction that changes gradually rather than reversing along a single axis. Blade-pitch control limits loads and power in strong currents, while braking and shutdown systems protect the machine during faults or exceptional conditions.
Support structures include seabed-mounted monopiles, piled frames, gravity bases, and floating platforms held by moorings. Fixed foundations can provide a stable rotor position and low surface visibility, but installation and retrieval may require specialized vessels. Floating platforms can make turbines more accessible and allow larger components to be assembled ashore. They must nevertheless withstand waves, mooring loads, and platform motion, and their dynamic power cables require careful fatigue design.
Other concepts include vertical-axis and cross-flow turbines, oscillating hydrofoils, ducted machines, and tethered underwater kites. Vertical-axis rotors can accept changing horizontal flow directions without a conventional yaw system, although cyclic blade loading is a design concern. Oscillating hydrofoils convert periodic lifting motion into useful mechanical power. Underwater kites move through the current along controlled paths, increasing the flow speed experienced by a comparatively small turbine.
No single arrangement is optimal for every site. Water depth, clearance for vessels, turbulence, seabed geology, maintenance access, and distance to shore all influence selection. Device comparisons must distinguish rated capacity from measured annual production and account for availability, installation requirements, and the number of machines needed to deliver a specified amount of electricity.
Marine engineering, reliability, and maintenance
The marine environment imposes simultaneous mechanical, chemical, and operational stresses. Turbine blades encounter turbulence, vertical shear, wave-induced velocities, and disturbances from upstream devices. These variations produce repeated loading of blades, shafts, bearings, foundations, and moorings. A turbine can therefore satisfy an ultimate-strength requirement yet still experience unacceptable fatigue damage over its intended service life. Design requires both extreme-event analysis and assessment of millions of smaller load cycles.
Seawater promotes corrosion, including localized attack and galvanic corrosion where dissimilar metals are electrically connected. Protective coatings, suitable alloys, sealed compartments, and cathodic protection reduce these risks. Corrosion control must remain effective after installation damage and years of exposure. Biofouling by algae, barnacles, and other organisms changes surface roughness, can reduce hydrodynamic performance, and may interfere with moving parts or instruments. Protection systems must also comply with restrictions on substances released into the marine environment.
Cavitation is another design constraint. When local pressure on a rapidly moving blade falls sufficiently, vapour cavities can form and then collapse in higher-pressure regions. Their collapse may cause noise, vibration, and material erosion. Rotor speed, blade shape, installation depth, and local flow conditions influence cavitation risk. Designing for greater submergence can help, but competes with seabed clearance, foundation cost, and access requirements.
Water ingress can disable electrical equipment even when the main structural components remain intact. Shaft seals, connectors, penetrations, and pressure-compensation systems are therefore critical. Subsea power cables face their own failure mechanisms, including excessive bending, abrasion, anchor damage, and fatigue at floating-platform interfaces. Cable burial or protective covering may reduce external damage but can be difficult in rocky channels with strong currents.
Maintenance planning is dominated by access. The same fast currents that make a site attractive for generation can prevent divers, remotely operated vehicles, or lifting vessels from working safely for much of each tide. Suitable operations may be restricted to slack-water windows, while waves and weather impose additional limits. A repair lasting only a few hours in a workshop can consequently cause weeks of lost production if retrieval equipment or an acceptable weather window is unavailable.
Developers address these constraints through retrievable nacelles, modular connectors, remote diagnostics, and condition monitoring. Sensors can track vibration, temperature, seal condition, electrical performance, and structural loads. Shore-based supervisory control and data acquisition systems coordinate operation and record faults. Reliability assessment must consider the entire generating system, including foundations, cables, connectors, and shore equipment, rather than only the turbine rotor. Long-duration operation and repeated maintenance campaigns provide information that short prototype trials cannot supply.
Historical development and major installations
The use of tides for mechanical work predates electricity by many centuries. Tide mills trapped water in a pond at high tide and released it through a water wheel as the sea receded. Medieval examples operated around the Atlantic coasts of Europe, grinding grain in places where a suitable inlet and embankment could create storage. These mills demonstrated the basic tidal-range principle, but their work schedules followed the tide rather than a continuous demand for power.
Large-scale electrical generation required advances in low-head turbines, generators, hydraulic construction, and power transmission. The La Rance tidal power station in Brittany, France, entered service in 1966. Its 24 bulb turbine-generator units provide a total installed capacity of 240 megawatts. The barrage also carries a road crossing and incorporates a navigation lock. La Rance became a major source of operational experience with reversible machines, variable-head generation, pumping, corrosion control, and long-lived civil infrastructure.
Other twentieth-century projects explored smaller or experimental applications. The Kislaya Guba installation in the Soviet Union began operating in 1968 as a small tidal-power demonstration. China developed several small tidal stations, including Jiangxia in Zhejiang, which began generating in 1980. The Annapolis Royal station in Nova Scotia operated from 1984 until 2019 and had a capacity of 20 megawatts. Such projects differed greatly in scale and local circumstances, limiting the extent to which their costs or environmental outcomes can be generalized.
South Korea’s Sihwa Lake tidal power station began commercial operation in 2011. With ten units totalling 254 megawatts, it surpassed La Rance in installed tidal-range capacity. It was incorporated into an existing seawall enclosing an artificial lake rather than built as an entirely new tidal impoundment. The station generates on the incoming tide, and increased seawater exchange was also intended to address water-quality problems associated with the enclosed lake. Its infrastructure history makes it an imperfect cost comparison for a wholly new barrage.
Tidal-stream development followed a different path, progressing through individual machines and small arrays. SeaGen, installed in Strangford Lough in Northern Ireland in 2008, was a 1.2-megawatt twin-rotor demonstration with a structure that allowed the turbines to be raised for maintenance. The European Marine Energy Centre, established in Orkney in 2003, provided grid-connected testing infrastructure for marine-energy devices and became an important site for tidal-turbine trials.
The MeyGen project in Scotland’s Inner Sound installed an initial array of four 1.5-megawatt turbines during 2016–2017. Floating designs also advanced: Orbital Marine Power’s 2-megawatt O2 device began generating at Orkney in 2021. These projects extended experience from isolated prototypes toward array operation, repeated maintenance, and longer-term electricity delivery, without eliminating the commercial and engineering uncertainties of larger-scale deployment.
Resource assessment and array design
Assessing a tidal site begins with measurements of water depth, seabed conditions, water levels, and currents. Acoustic Doppler current profilers measure velocity at multiple depths by analysing sound scattered from particles in the water. Vessel surveys, seabed instruments, and coastal monitoring together reveal the spatial and temporal structure of the flow. A short record may capture individual tidal cycles but fail to represent spring–neap variability, seasonal influences, or longer-period changes.
Measured data support hydrodynamic models that simulate water movement through the surrounding channels and basins. These models must represent bathymetry, seabed friction, tidal forcing, and relevant boundary conditions. Model validation compares predicted water levels and current speeds with observations, while uncertainty analysis examines how errors propagate into estimated production. Because power depends strongly on velocity, a modest bias in predicted flow speed can produce a much larger bias in estimated energy yield.
Resource estimates have several meanings. A theoretical resource describes energy in the natural system under broad physical assumptions. A technical resource accounts for devices, extraction limits, installation conditions, and other engineering constraints. An economically recoverable resource additionally depends on costs, revenues, finance, and competing uses of the sea. Figures expressed in gigawatts or terawatt-hours are not comparable unless their definitions and assumptions are also known.
Array design introduces interactions absent from simple single-turbine calculations. A rotor leaves a wake with reduced mean velocity and increased turbulence. Downstream turbines may consequently produce less electricity and experience different fatigue loads. Spacing machines farther apart can improve performance per turbine but increases the area occupied and may require longer cables. Staggered layouts can reduce direct wake overlap, although reversing and turning currents complicate arrangements familiar from one-directional flow.
Extraction also affects the channel as a whole. Turbine thrust adds resistance, potentially changing flow speed, water levels, and the distribution of discharge between neighbouring passages. Greater extraction does not indefinitely produce proportionally greater power. The relevant limit depends on how the broader tidal system responds, including whether flow is diverted around the array. The familiar isolated-rotor power limit from unconfined flow cannot simply be applied as a complete limit for a blocked channel or an estuary.
Practical layouts must accommodate shipping routes, fishing activity, protected habitats, cable corridors, and adequate clearances above the seabed and below the surface. Mathematical optimization can help balance annual energy, electrical losses, installation cost, and structural loading. Its results remain conditional on the models and constraints supplied. Array-scale demonstrations are particularly important because wake interactions and channel response cannot be established fully from the successful operation of a single device.
Electricity conversion and grid integration
The mechanical speed of a tidal turbine varies with the current unless the controller deliberately constrains it. Modern variable-speed machines commonly use power electronics to convert generator output into electricity compatible with the receiving network. A typical arrangement rectifies variable-frequency generation to a direct-current link and then uses a power inverter to supply controlled alternating current. This decouples rotor speed from grid frequency and supports efficient operation over a range of flows.
Subsea cables collect output from individual turbines and carry it to shore, sometimes through an offshore collection point. Voltage selection reflects power level, distance, conductor cost, and electrical losses. Shore equipment includes protection, switching, metering, and transformers. Connection design must account for cable capacitance, fault behaviour, voltage regulation, and the requirements imposed by the local electrical grid. A strong tidal resource near a weak network may require substantial reinforcement before its output can be used.
Predictability is tidal power’s main operational advantage, but predictable generation is not the same as constant generation. A stream turbine produces little or no power near slack water, more as the current accelerates, and potentially its rated output during the strongest flow. Generation varies across the spring–neap cycle. A tidal-range station also has periods without output while it waits for a useful head to develop. The relationship between these cycles and electricity demand changes from day to day.
For a predominantly semidiurnal resource, comparable phases of the tide occur roughly 50 minutes later on successive solar days. A production peak therefore does not remain aligned with the morning or evening demand peak. Sites with different tidal phases can partly smooth their combined output, but the benefit depends on actual phase differences, resource strength, and transmission connections. It cannot be assumed merely because projects are geographically separated.
Energy storage can shift electricity between generating and non-generating periods. Batteries may handle short-duration smoothing or specific delivery commitments, while other storage technologies can serve different durations and scales. Storage introduces its own capital cost, losses, and operating limits. Tidal-range plants can also shift production within a restricted window by changing gate and turbine schedules, though delaying generation may reduce the energy captured.
Grid value is therefore broader than annual megawatt-hours. Forecastable output can reduce uncertainty in scheduling, while power-electronic controls may provide voltage support or other services when appropriately designed and contracted. Conversely, dependable capacity during periods of highest system stress must be assessed using the timing of tides, equipment availability, and the wider generation mix. Neither installed capacity nor astronomical predictability alone establishes the amount of conventional capacity a tidal project can replace.
Environmental effects and competing coastal uses
Environmental effects depend strongly on whether a project impounds water or extracts energy from an open channel. A barrage can alter the tidal range inside an estuary, the timing of high and low water, current speeds, salinity, and sediment transport. These changes may expand some habitats while reducing others. Intertidal mudflats and salt marshes are particularly sensitive because their ecological functions depend on the frequency and duration of inundation.
Changes in sediment movement can affect navigation channels, shorelines, and turbidity. Water quality may improve where a project increases flushing, or deteriorate where exchange is reduced and pollutants or nutrients accumulate. The Sihwa project illustrates the importance of the pre-existing condition: restoring seawater exchange to an already enclosed lake is environmentally different from constructing a new barrier across a freely exchanging estuary. Outcomes cannot be attributed to turbine technology alone.
Fish may encounter altered migration routes, delays, entrainment, blade strike, or rapid pressure changes when passing through tidal-range structures. Effects vary by species, body size, turbine geometry, rotational speed, and operating head. Fish passages and operational restrictions may reduce particular risks, but their effectiveness must be demonstrated under local conditions. Construction can also create underwater noise, disturb sediments, and temporarily restrict movement.
Tidal-stream arrays generally avoid the basin-wide impoundment changes associated with barrages, but they introduce rotating machinery, foundations, moorings, and cables into energetic marine habitats. Potential effects include collision with blades, displacement from feeding areas, underwater noise, seabed disturbance, and changes to local flow. Electrical cables can produce electromagnetic fields, whose ecological significance depends on cable design, burial, species sensitivity, and exposure.
Monitoring collision risk is difficult because strong currents, low visibility, and limited observation volumes constrain detection. Sonar, underwater cameras, passive acoustic monitoring, and animal-borne tags provide complementary information. Failure to observe a collision does not by itself demonstrate that no collisions occur; interpretation requires knowledge of detection probability and monitoring effort. Likewise, animal avoidance may reduce direct collision risk while still changing access to habitat.
Projects also interact with fisheries, shipping, recreation, coastal landscapes, and cultural heritage. These relationships are addressed through site selection, environmental assessment, consultation, operating conditions, and monitoring. Large arrays may have cumulative effects that differ from those of an individual demonstration device. Long-lived civil works also require attention to sea-level rise, changing storm exposure, and future habitat conditions. Environmental management therefore extends through construction, operation, major refurbishment, and eventual removal or adaptation.
Economics, deployment, and research priorities
Tidal-range and tidal-stream projects have markedly different cost structures. Barrages and lagoons require large initial investments in civil works, foundations, gates, and turbines, but their principal structures can have long service lives. Tidal-stream projects are more modular and can be expanded in stages, yet installation vessels, subsea connections, retrieval operations, and offshore maintenance can account for substantial expenditure. A smaller initial project does not necessarily have a lower cost per unit of electricity.
The levelized cost of electricity expresses discounted lifetime costs divided by discounted lifetime electricity production:
where represents investment, operating expenditure, fuel expenditure, decommissioning expenditure, electricity generated, the discount rate, and the assessment period. Tidal generation has no purchased fuel in the ordinary operating sense, but financing and maintenance remain important. Assumptions about equipment replacement and residual value are especially significant for long-lived projects.
Capacity factor—the ratio of actual generation to the output that continuous rated operation would have produced—depends on resource conditions, generator sizing, operating strategy, and availability. Increasing rated capacity may capture more power during the strongest currents while lowering capacity factor. Conversely, selecting a smaller generator can raise capacity factor without maximizing annual energy. Comparisons should therefore consider both production and total system cost rather than treating a high capacity factor as an independent measure of superiority.
Early tidal-stream projects face costs associated with small production volumes, bespoke components, limited operating histories, and uncertain maintenance requirements. Costs may fall through standardized designs, repeat manufacture, improved installation procedures, and more reliable equipment. Such reductions are not automatic: a design that is inexpensive to fabricate may be costly to retrieve, while a larger turbine may require vessels or port facilities unavailable near the site. Demonstrated energy yield and serviceability are central to commercial assessment.
Revenue arrangements also influence development. Long-term electricity contracts, demonstration grants, and technology-specific support can reduce exposure to uncertain wholesale prices. Public authorities may consider industrial development, energy diversity, and local infrastructure alongside generation costs. These considerations are distinct from claims that tidal electricity is universally cheaper or more valuable than alternatives. Comparisons must use consistent financing assumptions and account for project location, grid requirements, and delivery timing.
Research priorities include reducing fatigue loads, improving blade and seal durability, designing reliable subsea connectors, and validating array-scale models. Environmental research focuses on animal behaviour around operating devices, cumulative habitat effects, and methods that quantify monitoring uncertainty. For tidal-range projects, important questions concern sediment evolution, ecological response, and operating schedules that balance energy with water-level requirements. Decommissioning remains part of the engineering and financial problem: removing turbines, cables, foundations, or major embankments can entail very different costs and environmental consequences.