Thermoelectric cooling is a method of refrigeration that uses an electric current to transfer heat between two sides of a solid-state device. It operates through the Peltier effect, in which current passing between different conducting materials causes heat to be absorbed or released at their junctions. A thermoelectric cooler is therefore an electrically driven heat pump: it removes heat from a cold surface and rejects that heat, together with the electrical energy it consumes, at a hotter surface. Its principal advantages are compactness, precise temperature control, and the absence of moving parts within the cooling element.
Physical principle
The Peltier effect is one of several related thermoelectric effects connecting electrical and thermal transport. When charge carriers move between materials with different thermoelectric properties, they carry different amounts of heat per unit electric charge. The resulting heat exchange can cool one junction and heat another. Reversing the current reverses the direction of Peltier heat transport.
For an ideal junction, the rate of Peltier heat transfer is
where is the current and and are the Peltier coefficients of the two materials, with the sign determined by the chosen current direction and material ordering.
The reciprocal phenomenon, the Seebeck effect, produces a voltage when a suitable circuit spans a temperature difference. It is the operating principle of thermoelectric generators, including the conversion elements in a radioisotope thermoelectric generator. Cooling and generation use the same underlying coupling between electrical and thermal transport, although devices are optimized differently for each task.
Peltier cooling competes with two unavoidable processes:
- Electrical resistance heating: current produces Joule heating within the device.
- Heat conduction: heat flows back from the hot side toward the cold side through the materials.
Consequently, increasing current does not indefinitely increase useful cooling. Beyond an operating optimum, additional resistance heating outweighs the additional Peltier heat transport.
Construction and materials
Most commercial thermoelectric modules contain many pairs of p-type and n-type semiconductor legs. Metal interconnects join the legs electrically in series, while the legs provide parallel paths for heat flow between two faces. The carrier types and electrical connections are arranged so that all pairs pump heat in the same direction.
The assembly is commonly enclosed between electrically insulating, thermally conducting ceramic plates. These plates provide mounting surfaces and isolate the electrical circuit from the cooled object and the heat-rejection equipment. Thin-film and other specialized devices may use different substrates or packaging.
Near room temperature, widely used thermoelectric materials are based on bismuth telluride and related alloys. Suitable materials combine:
- a large Seebeck coefficient;
- high electrical conductivity, limiting resistance losses;
- low thermal conductivity, limiting heat leakage.
These properties are difficult to optimize independently because the same charge carriers can contribute to both electrical and thermal conduction.
A common measure of material quality is the dimensionless thermoelectric figure of merit:
where is the Seebeck coefficient, is electrical conductivity, is total thermal conductivity, and is absolute temperature. Higher generally permits better thermoelectric performance under comparable conditions, but it does not by itself specify the efficiency of a complete cooling system. Electrical contacts, packaging, geometry, and heat-exchanger performance also matter.
Heat balance and performance
A simplified steady-state model for a module with approximately constant properties gives its cold-side cooling rate as
where:
- is heat removed from the cold side;
- is the effective Seebeck coefficient of the module;
- and are the absolute cold- and hot-side temperatures;
- is the module's electrical resistance;
- is its thermal conductance.
The three terms represent Peltier cooling, the cold-side share of resistance heating, and conductive heat leakage. Assigning half the resistance heating to each side is an idealization; detailed models may include temperature-dependent properties, contact effects, and Thomson heating.
The corresponding electrical input is approximately
By energy conservation, the hot side must reject
For example, a cooler removing 20 watts from an object while consuming 40 watts of electricity requires its hot-side equipment to dissipate 60 watts. A module cannot maintain useful cooling merely by transferring heat to its opposite face; that heat must ultimately reach the surrounding environment.
Efficiency and temperature lift
Cooling efficiency is normally expressed by the coefficient of performance:
COP depends strongly on the temperature difference, operating current, material properties, and heat load. It can exceed one at small temperature lifts because the device moves heat rather than converting electricity directly into an equivalent quantity of cooling. This does not violate thermodynamics.
For an ideal reversible refrigerator operating between two fixed-temperature reservoirs, the upper limit is
Real thermoelectric coolers operate below this limit because of resistance, heat conduction, and other losses.
Two commonly quoted module specifications must be distinguished:
- Maximum cooling capacity is usually specified at zero temperature difference across the module.
- Maximum temperature difference is usually specified at essentially zero external cooling load.
These maxima cannot be achieved simultaneously. Conventional single-stage modules commonly have no-load temperature-difference ratings around 60–70 kelvin under specified conditions, but the achievable difference decreases when they must remove a substantial heat load.
System design and control
Heat rejection and thermal interfaces
Hot-side temperature strongly influences performance. A warmer hot side increases the temperature difference the module must overcome and generally reduces its available cooling capacity at a given cold-side temperature.
Practical systems therefore use a heat sink or heat exchanger, often with forced air or liquid circulation. Although the thermoelectric element has no moving parts, the complete installation may contain fans or pumps.
Thermal resistance also exists between the module and the object being cooled. Surface flatness, interface materials, and mounting pressure affect the temperature drop across these contacts. The cooled object may consequently be warmer than the module's cold ceramic face.
Temperature regulation
A temperature sensor and electronic controller adjust current to maintain a desired temperature. A PID controller is one common approach. Reversible current allows the same module to supply heating or cooling, which is useful when a controlled object must remain near a fixed temperature despite changing ambient conditions.
Current regulation matters because cooling is not proportional to current across the entire operating range. Supply ripple can also increase resistance heating relative to a smoother current with the same mean value.
Cascaded modules
Multistage, or cascaded, coolers place stages thermally in series to obtain larger temperature differences. Each warmer stage must remove both the heat load and the electrical heat produced by the colder stages. Cascades therefore require progressively greater heat-handling capacity toward the hot end and generally have lower overall efficiency. They are useful for small loads requiring temperatures beyond the practical range of a single-stage module, rather than for large-capacity refrigeration.
Applications
Thermoelectric cooling is especially useful where precision, compactness, orientation independence, or low mechanical vibration matters more than minimum electricity consumption.
Major applications include:
- Optoelectronics: stabilizing laser diodes and optical components whose output changes with temperature.
- Detectors and imaging: cooling selected infrared detectors, scientific cameras, and other sensors to reduce temperature-dependent noise.
- Laboratory instruments: controlling small sample holders, reference surfaces, and analytical components.
- Portable and small enclosures: cooling insulated boxes and compact equipment compartments.
- Localized electronics cooling: controlling particular components or small regions rather than cooling an entire enclosure.
For electronic equipment, a thermoelectric module adds its electrical input to the heat that the external cooling system must reject. It therefore does not automatically improve the thermal performance or energy efficiency of an already adequate conventional cooling arrangement.
Advantages and limitations
Compared with vapor-compression refrigeration, thermoelectric cooling offers a mechanically simple cooling element, small size, convenient electrical control, and easy reversal between heating and cooling. The module itself requires no circulating refrigerant and can operate in different orientations.
Its principal limitation is efficiency. For many room-temperature refrigeration duties involving substantial loads or temperature lifts, vapor-compression systems consume less electricity. Thermoelectric systems also face practical constraints:
- Heat leakage becomes increasingly important at larger temperature differences.
- Large loads require substantial electrical power and hot-side heat-rejection capacity.
- Cooling below the surrounding air's dew point can cause condensation or frost.
- Thermal cycling, mechanical stress, and moisture ingress can degrade module connections and packaging.
- Cascading increases attainable temperature difference at the cost of efficiency and complexity.
The absence of a circulating refrigerant does not make the technology environmentally impact-free. Electricity consumption, thermoelectric material production, manufacturing, and disposal remain relevant to its overall environmental performance.
Historical development and research
Jean Charles Athanase Peltier discovered the current-induced junction-heating and cooling effect in 1834. Early devices made from metals produced relatively small effects. Practical refrigeration became more attractive with the development of semiconductor thermoelectric materials during the twentieth century.
Research continues into improved materials, nanostructures, electrical contacts, thin-film devices, and integration with electronic components. A central objective is to reduce thermal conduction without proportionally reducing electrical conduction. Demonstrating a high material figure of merit, however, is distinct from producing a durable, economical cooling system: contact resistance, manufacturability, operating temperature, and system-level heat rejection remain decisive.