Snell’s law describes the change in direction of a wave as it passes across an interface between two media with different wave speeds. In optics, it relates the angles made by incident and refracted light to the refractive indices of the media. It is a fundamental rule for calculating refraction, designing optical instruments, and determining when light undergoes total internal reflection. The same mathematical relationship applies to other waves under suitable conditions, including sound and seismic waves.
Mathematical statement
For light passing from medium 1 into medium 2, Snell’s law is
where:
- is the refractive index of the incident medium;
- is the refractive index of the transmitted medium;
- is the angle of incidence;
- is the angle of refraction.
Both angles are measured from the normal, an imaginary line perpendicular to the interface at the point where the ray meets it. They are not measured from the surface itself. The incident ray, refracted ray, and normal lie in the same plane for ordinary refraction between isotropic media.
For a transparent medium, the phase refractive index is
where is the speed of light in vacuum and is the phase velocity in the medium. Consequently, the law can also be written as
For ordinary positive-index media:
- If , the transmitted ray bends toward the normal.
- If , it bends away from the normal, provided a propagating refracted wave exists.
- At normal incidence, , the transmitted ray remains normal to the interface.
- If the indices are equal, there is no change in direction.
These statements concern direction rather than the fraction of light transmitted. An interface can also produce reflection.
Physical basis
Wavefronts and phase matching
Refraction can be understood geometrically using the Huygens principle. When an oblique wavefront reaches an interface, one part enters the second medium before another. The change in propagation speed changes the wavefront’s orientation and therefore the direction perpendicular to it.
More generally, Snell’s law follows from phase matching at a stationary, uniform interface. The incident and transmitted waves must have compatible phase variations along the boundary. Their wave-vector components parallel to the interface therefore satisfy
For light of angular frequency ,
The frequency is unchanged across a stationary interface, giving Snell’s law directly. The wavelength generally changes:
where is the vacuum wavelength. Thus, the change in direction accompanies a change in wavelength, not a change in frequency.
For electromagnetic waves, these results follow from the boundary conditions associated with Maxwell’s equations.
Fermat’s principle
Snell’s law can also be derived from Fermat’s principle, according to which an optical ray follows a path for which the optical travel time is stationary with respect to small variations of the path.
Consider two fixed points on opposite sides of a flat interface. If the ray crosses the interface at a variable horizontal coordinate , its travel time is
where and are the perpendicular distances of the points from the interface. Setting gives
This explains why the ray does not generally follow the shortest geometric path between the points. Its path depends on propagation speed in each medium. The more precise principle is stationary optical path, rather than an unconditional statement that every optical path has the least possible travel time.
Examples and consequences
Air-to-glass refraction
Suppose light travels from air, approximated by , into glass with , at an incidence angle of . Then
so
The transmitted ray is closer to the normal. Reversing the ray’s path gives the corresponding glass-to-air trajectory, illustrating optical reversibility in ordinary reciprocal media.
Apparent depth
An object beneath a flat water surface can appear shallower than it actually is because rays emerging into air bend away from the normal. For near-normal viewing, the apparent depth is approximately
where is the actual depth. This approximation does not describe all viewing angles; oblique viewing produces a more complicated apparent geometry.
Plane-parallel plates
A ray passing through a transparent plate with parallel faces emerges parallel to its original direction if the media on both sides are identical. Nevertheless, it is generally displaced sideways. Applying Snell’s law at both surfaces shows how the second refraction cancels the first angular change without canceling the lateral displacement.
Total internal reflection
When light travels from a higher-index medium into a lower-index medium, Snell’s law gives an increasingly large refracted angle as the incident angle increases. The limiting case occurs when the refracted direction is parallel to the interface:
The corresponding critical angle is
Above this angle, no real refracted angle satisfies the ordinary ray equation. For an ideal boundary between transparent, lossless media, total internal reflection occurs.
The electromagnetic field does not simply vanish on the lower-index side. An evanescent field extends into that medium and decays away from the interface. A nearby additional medium can interact with this field, allowing transmission through frustrated total internal reflection.
This behavior underlies light guidance in optical fibers and the operation of many optical prisms.
Dispersion and optical applications
Refractive index generally depends on frequency or wavelength, a property called dispersion. Snell’s law therefore applies separately to each spectral component:
A prism can separate white light into colors because different wavelengths undergo different angular deviations. Dispersion also contributes to chromatic aberration in lenses.
Snell’s law is central to geometric ray tracing. At a curved surface, the normal changes with position, so the law is applied locally at each point where a ray crosses the surface. Successive applications determine paths through lenses, prisms, windows, and multilayer optical assemblies. Such calculations support the design of cameras, microscopes, and telescopes.
For small angles measured in radians, , giving the paraxial approximation
This approximation simplifies first-order optical calculations but becomes inaccurate for strongly inclined rays.
Historical development
A mathematical relationship equivalent to the sine law appears in the work of the mathematician Ibn Sahl around 984, in connection with the geometry of burning lenses and mirrors. Earlier and medieval investigators, including Ptolemy and Ibn al-Haytham, studied refraction without formulating the law in its familiar modern form.
Willebrord Snell obtained the sine relationship in 1621, but did not publish it during his lifetime. René Descartes published the law in 1637 in La Dioptrique. These contributions account for the names Snell’s law and Snell–Descartes law. Subsequent wave theories and electromagnetic theory supplied physical foundations for a relationship first established through geometrical and optical investigation.
Scope and limitations
The familiar scalar equation is most directly applicable to a stationary, locally smooth interface between homogeneous, isotropic media that support well-defined propagating waves. Several qualifications matter:
- Direction is not intensity. Snell’s law determines the refracted direction, not how much energy is reflected or transmitted. The Fresnel equations determine reflection and transmission amplitudes and their dependence on polarization.
- Geometric optics is an approximation. When apertures, surface features, or material variations are comparable to the wavelength, diffraction and interference can prevent a single-ray description from being adequate.
- Anisotropic materials require additional care. In crystals exhibiting birefringence, the refractive behavior depends on direction and polarization. Phase matching still constrains the wave vector, but energy flow need not be parallel to that vector.
- Absorbing media require a complex-wave treatment. Their refractive indices and wave vectors can be complex, so a single real refraction angle may not capture both phase propagation and attenuation.
- Spatially varying media bend rays continuously. If refractive index changes gradually rather than at a sharp boundary, rays generally follow curved paths. In a medium whose index varies only with height, a corresponding conserved quantity is , with the angle measured from the direction of the index gradient.
- Structured or moving interfaces can change the matching conditions. Diffraction gratings and patterned surfaces can supply additional tangential wave-vector components, while moving or time-varying boundaries can change frequency. Their behavior is not fully represented by the elementary two-index formula.