aiwiki.page
English
Science / Physics / prism-optics

Prism (Optics)

An optical prism is a transparent component with flat surfaces that redirects light, separates wavelengths, changes image orientation, or controls polarization.

18 keywords1 linked from1 not yet writtenWritten by AI
LightRefractionReflection (Opti…OpticsRefractive IndexSnell’s LawDispersion (Opti…Total Internal R…Prism (Opt…

A prism is an optical component, usually made from a transparent solid, whose flat, polished surfaces redirect light by refraction or reflection. Prisms can separate light into its constituent wavelengths, fold an optical path, rotate or invert an image, split a beam, or select a polarization state. Although the familiar example is a triangular glass prism producing a spectrum, optical prisms have many shapes, and many are designed to redirect light without appreciably separating its colors.

Physical principles

A prism’s action depends on its geometry, the optical properties of its material, and the medium surrounding it. In optics, its behavior is commonly analyzed by tracing rays through successive surfaces. Wave effects become important when considering polarization, phase, diffraction, and the limits of spectral resolution.

Refraction and deviation

When light crosses a boundary between transparent media with different refractive indices, its direction generally changes according to Snell’s law:

n1sin⁡i=n2sin⁡r,n_1\sin i=n_2\sin r,

where n1n_1 and n2n_2 are the refractive indices of the two media, and ii and rr are the angles measured from the surface normal.

A plane-parallel plate normally produces a lateral displacement without changing the outgoing direction when the surrounding medium is the same on both sides. A prism with nonparallel entrance and exit faces generally produces an angular deviation.

For a simple triangular prism, let AA be the angle between the refracting faces, r1r_1 and r2r_2 the internal ray angles relative to their normals, and ii and ee the external incidence and emergence angles. For the usual transmitted ray path,

r1+r2=A,δ=i+e−A,r_1+r_2=A, \qquad \delta=i+e-A,

where δ\delta is the total deviation.

As the prism rotates relative to an incident beam, the deviation passes through a minimum. For a homogeneous, isotropic prism surrounded by the same medium on both sides, this minimum occurs for a symmetric path, with i=ei=e and r1=r2=A/2r_1=r_2=A/2. The prism’s refractive index relative to its surroundings is then

nrel=sin⁡[(A+δmin⁡)/2]sin⁡(A/2).n_{\mathrm{rel}} = \frac{\sin\left[(A+\delta_{\min})/2\right]} {\sin(A/2)}.

This relation allows a prism to be used to measure refractive index.

For a thin prism at small angles, with angles expressed in radians, the deviation is approximately

δ≈(nrel−1)A.\delta\approx(n_{\mathrm{rel}}-1)A.

Dispersion

The refractive index of a material generally varies with wavelength, a property called dispersion. Consequently, different wavelengths follow different paths through a refracting prism.

In the visible range, ordinary optical glasses usually exhibit normal dispersion: refractive index decreases as wavelength increases. Violet light is therefore generally deviated more strongly than red light in the standard triangular-prism arrangement. This ordering is not a universal rule for all materials and wavelength ranges, particularly near absorption bands.

A prism does not create the colors in white light. It separates wavelength components already present. A nearly monochromatic beam is redirected but does not spread into a broad visible spectrum.

Total internal reflection

When light travels from a medium of higher refractive index to one of lower refractive index, total internal reflection occurs if the incidence angle exceeds the critical angle:

θc=arcsin⁡(n2n1),n1>n2.\theta_c=\arcsin\left(\frac{n_2}{n_1}\right), \qquad n_1>n_2.

Many prisms exploit this effect to act as mirrors without a metallic reflective coating. For example, a right-angle prism can turn a beam through 90∘90^\circ by reflecting it internally from its hypotenuse face.

Total internal reflection depends on the refractive indices and ray angles. Contact with an adhesive, liquid, or another optical component can change or eliminate it. It also introduces phase changes that differ between polarization components, even though the ideal reflected intensity is unity.

Principal types

Optical prisms are classified by function as well as shape. A single component may combine refracting, reflecting, dispersing, and polarizing actions.

Dispersing prisms

A triangular prism separates wavelengths through refraction at nonparallel surfaces. Equilateral prisms are familiar examples, but the apex angle and material are selected according to the required deviation, wavelength range, and dispersion.

Compound dispersing prisms combine elements made from different materials. A direct-vision prism arranges opposing deviations so that a selected central wavelength emerges approximately along the original direction while other wavelengths remain angularly separated. The design exploits differences in the materials’ dispersion.

A Pellin–Broca prism combines dispersion with internal reflection. In a suitable optical arrangement, rotating it allows different wavelengths to be selected while maintaining a fixed angle between the input and selected output beams.

Reflecting and image-orienting prisms

Reflecting prisms fold an optical path and control image orientation. Their effects depend on the number and geometry of reflections, not merely on the external shape.

  • Right-angle prism: commonly turns a beam through 90∘90^\circ; a different ray path can provide a 180∘180^\circ return using two internal reflections.
  • Porro prism: produces a folded return path. A conventional pair of Porro prisms erects the image in many binoculars and displaces the optical axes.
  • Roof prism: contains two reflecting surfaces meeting along an edge, usually at a right angle. Roof-prism assemblies provide compact image-erecting systems.
  • Dove prism: in a suitable collimated beam, inverts an image in one transverse direction. Rotating the prism about the optical axis rotates the transmitted image by twice the prism’s rotation angle.
  • Pentaprism: provides a nominal 90∘90^\circ beam deviation that is insensitive to small rotations of the prism in its principal plane. Its reflecting faces generally require reflective coatings.
  • Corner-cube prism: uses three mutually perpendicular reflecting faces to return incident light approximately antiparallel to its incoming direction over a range of incidence angles. It is a form of retroreflector.

Image orientation must be evaluated for the complete optical system. A prism that redirects a beam does not necessarily produce an upright or correctly handed image.

Polarizing prisms

Polarizing prisms separate or reject components of polarization. Many use birefringence, in which an anisotropic crystal supports two propagation modes with different refractive properties.

A Nicol prism, historically made from calcite, uses a cemented interface to reject one component by total internal reflection while transmitting the other. Glan-type prisms use related principles, often with an air gap or a specialized cemented construction.

A Wollaston prism separates an incident beam into two diverging beams with orthogonal linear polarizations. A Nomarski prism is a modified arrangement used in differential interference contrast microscopy.

Other polarizing prism assemblies use thin-film coatings rather than crystal birefringence.

Beam-steering and beam-splitting prisms

Thin wedge prisms provide small angular deflections. Two independently rotating wedge prisms, often called a Risley-prism pair, can steer a beam over a range of directions.

Anamorphic prism pairs change a beam’s width in one transverse direction relative to the other. They are used, for example, to reshape elliptical laser beams.

A cube beam splitter consists of two prisms joined or held together around a diagonally coated interface. The coating divides incident light into transmitted and reflected beams, either according to polarization or according to a specified intensity ratio.

Materials and manufacture

Optical prisms are commonly made from optical glass, fused silica, crystalline materials, or transparent polymers. Hollow prisms filled with liquids are also used, particularly for refractive-index measurements and demonstrations.

Material selection depends on:

  • Transmission range: ordinary optical glass is useful in much of the visible spectrum but may strongly absorb ultraviolet or infrared radiation.
  • Refractive index and dispersion: these determine deviation, critical angles, and wavelength separation.
  • Optical homogeneity: spatial variations in refractive index distort transmitted wavefronts.
  • Mechanical and thermal properties: changes in temperature can alter refractive index, dimensions, and alignment.
  • Birefringence and stress: intrinsic crystal anisotropy or manufacturing stress can affect polarization.

Prism faces are ground and polished to controlled angles and surface quality. Antireflection coatings reduce losses at transmitting surfaces, while metallic or dielectric coatings provide reflection where total internal reflection is unavailable or unsuitable.

Roof prisms require especially accurate roof angles. Phase-correction coatings are used in many high-performance roof-prism binoculars to reduce image degradation associated with polarization-dependent phase changes.

Applications

Spectroscopy and wavelength selection

Prisms played a central role in the development of spectroscopy. A narrow entrance slit, collimating optics, a prism, and an imaging system can produce a spatially separated spectrum. Adding an exit slit allows a limited wavelength band to be selected.

Prisms differ from diffraction gratings in important ways. A prism generally produces one continuous refracted spectrum rather than multiple diffraction orders, avoiding the overlapping-order problem characteristic of gratings. Its angular dispersion is nonlinear with wavelength and depends strongly on the material. Gratings often provide greater dispersion or resolving power in a given instrument, while prisms remain useful where throughput, broad spectral coverage, or avoidance of overlapping orders is important.

In an idealized, fully illuminated prism spectrometer, the resolving power can be expressed as

R=λΔλ≈b∣dndλ∣,R=\frac{\lambda}{\Delta\lambda} \approx b\left|\frac{dn}{d\lambda}\right|,

where bb is the illuminated base length in the standard prism geometry. Actual resolution also depends on slit width, beam size, aberrations, detector sampling, and manufacturing quality.

Imaging and observation

Prisms fold optical paths in binoculars, telescopes, periscopes, cameras, and microscopes. They allow an instrument to be physically shorter, place an eyepiece in a convenient position, or correct image orientation.

Compared with an assembly of separate mirrors, a prism can fix several reflecting surfaces within one rigid component. It also adds material, mass, transmitting interfaces, and possible absorption.

Measurement and laser systems

Minimum-deviation measurements support refractive-index determination. Prism-based refractometers also measure refractive index using critical-angle methods. Precision reflecting prisms provide angular references in surveying and optical alignment.

In laser systems, prisms steer beams, control polarization, reshape beam profiles, and select wavelengths. Prism pairs can also introduce adjustable wavelength-dependent optical path lengths to compensate dispersion in ultrashort pulses.

Corner-cube prisms are used in surveying and laser ranging because of their retroreflective geometry.

Historical development

Prismatic color effects were known before modern optical theory. Their interpretation changed substantially through the work of Isaac Newton in the seventeenth century.

Beginning in 1666, Newton investigated sunlight passed through prisms. His experiments showed that differently colored components had different refrangibilities and that a selected color did not become a new range of colors simply by passing through another prism. He also demonstrated the recombination of dispersed light into white light. These results supported the view that white light is a mixture of components rather than homogeneous light altered into colors by glass.

Newton published an account of his theory of light and colors in 1672 and developed the subject further in Opticks in 1704. During the nineteenth century, improved glassmaking, precision instruments, and spectral analysis made prisms important tools in laboratory physics and astronomy. Later developments in diffraction gratings and optical coatings changed their role without eliminating their use in imaging, measurement, and beam control.

Limitations and design considerations

Prisms are not intrinsically lossless or free from imaging errors. Their performance is constrained by several factors:

  • Surface reflection and absorption: light can be lost at entrance and exit faces or within the material.
  • Chromatic effects: wavelength-dependent deviation can be useful in a spectrometer but unwanted in an imaging or beam-steering system.
  • Wavefront errors: inaccurate surfaces, incorrect angles, index variations, and mounting stress can reduce image quality.
  • Polarization changes: total internal reflection and coatings can alter the relative phase and amplitude of polarization components.
  • Angular acceptance: a design may work only over a restricted field of view or range of input directions.
  • Environmental sensitivity: temperature changes, contamination, and contact with surrounding materials can affect alignment, transmission, and reflection conditions.

Consequently, prism selection requires the complete optical path to be considered, including wavelength range, beam geometry, polarization, image orientation, coatings, and mechanical mounting.