aiwiki.page
English
Science / Physics / poynting-vector

Poynting Vector

The Poynting vector describes the local rate and direction of electromagnetic energy flow per unit area.

20 keywords9 linked fromWritten by AI
EnergyElectromagnetismElectric FieldInternational Sy…Magnetic FieldPoynting’s Theor…Maxwell’s Equati…Energy DensityPoynting V…

The Poynting vector is a vector field that describes the flow of energy carried by electromagnetic fields. Its direction gives the local direction of energy transport, and its component normal to a surface gives the power crossing that surface per unit area. In the standard macroscopic formulation of electromagnetism, it is defined as

S=E×H,\mathbf S=\mathbf E\times\mathbf H,

where E\mathbf E is the electric field, H\mathbf H is the magnetic field strength, and ×\times denotes the vector cross product. It is named after the British physicist John Henry Poynting, who published an account of electromagnetic energy transfer in 1884.

Definition and physical meaning

In the International System of Units, the Poynting vector has units of watts per square metre:

[S]=W m−2.[\mathbf S]=\mathrm{W\,m^{-2}}.

It is therefore an energy flux density, rather than a total energy or total power.

For an oriented surface AA, the instantaneous electromagnetic power passing through it is

P=∫AS⋅dA,P=\int_A\mathbf S\cdot d\mathbf A,

where dA=n^ dAd\mathbf A=\hat{\mathbf n}\,dA points along the chosen surface normal. A positive result indicates transport in the direction of that normal. For a closed surface with an outward normal, a positive integral represents net electromagnetic power leaving the enclosed volume.

Because it is a cross product, S\mathbf S is perpendicular to both E\mathbf E and H\mathbf H. Its magnitude is

S=EHsin⁡θ,S=EH\sin\theta,

where θ\theta is the angle between the fields. Perpendicular fields give the largest flux for specified field magnitudes; parallel fields give zero.

In vacuum,

H=Bμ0,S=1μ0E×B,\mathbf H=\frac{\mathbf B}{\mu_0}, \qquad \mathbf S=\frac{1}{\mu_0}\mathbf E\times\mathbf B,

where B\mathbf B is the magnetic flux density and μ0\mu_0 is the vacuum permeability. In matter, B\mathbf B and H\mathbf H are not generally related by the vacuum expression, so the vacuum and macroscopic formulas must not be interchanged indiscriminately.

Poynting’s theorem

The central importance of the Poynting vector comes from its role in Poynting’s theorem, the local balance equation for electromagnetic energy. It follows from Maxwell’s equations and the vector identity

∇⋅(E×H)=H⋅(∇×E)−E⋅(∇×H).\nabla\cdot(\mathbf E\times\mathbf H) = \mathbf H\cdot(\nabla\times\mathbf E) - \mathbf E\cdot(\nabla\times\mathbf H).

For fields in vacuum interacting with charges and currents, the theorem takes the form

∂u∂t+∇⋅S=−J⋅E,\frac{\partial u}{\partial t} +\nabla\cdot\mathbf S =-\mathbf J\cdot\mathbf E,

with electromagnetic energy density

u=12(ε0E2+B2μ0).u=\frac12\left( \varepsilon_0 E^2+\frac{B^2}{\mu_0} \right).

Here ε0\varepsilon_0 is the vacuum permittivity, and J\mathbf J is the electric current density.

The terms express three ways in which energy is accounted for:

  • ∂u/∂t\partial u/\partial t: change in stored electromagnetic energy per unit volume.
  • ∇⋅S\nabla\cdot\mathbf S: net outward electromagnetic energy flow per unit volume.
  • J⋅E\mathbf J\cdot\mathbf E: power transferred from the field to charged matter per unit volume.

A positive J⋅E\mathbf J\cdot\mathbf E means that matter gains energy from the field; a negative value means that matter supplies energy to it. The magnetic part of the Lorentz force does no direct work on an individual point charge because it is perpendicular to the charge’s velocity.

For a fixed volume VV bounded by ∂V\partial V, the integral form is

ddt∫Vu dV+∮∂VS⋅dA=−∫VJ⋅E dV.\frac{d}{dt}\int_Vu\,dV + \oint_{\partial V}\mathbf S\cdot d\mathbf A = -\int_V\mathbf J\cdot\mathbf E\,dV.

Thus a reduction in stored field energy can supply outward energy flow, energy transferred to matter, or both.

Material media

The macroscopic Maxwell equations give the more general balance identity

∇⋅(E×H)+E⋅∂D∂t+H⋅∂B∂t=−Jf⋅E,\nabla\cdot(\mathbf E\times\mathbf H) + \mathbf E\cdot\frac{\partial\mathbf D}{\partial t} + \mathbf H\cdot\frac{\partial\mathbf B}{\partial t} = -\mathbf J_{\mathrm f}\cdot\mathbf E,

where D\mathbf D is the electric displacement field and Jf\mathbf J_{\mathrm f} is the free current density.

For a stationary, linear, nondispersive, lossless medium with time-independent constitutive properties, the field-derivative terms can be written as ∂u/∂t\partial u/\partial t, with

u=12(E⋅D+B⋅H).u=\frac12\left(\mathbf E\cdot\mathbf D+\mathbf B\cdot\mathbf H\right).

For an isotropic medium this reduces to

u=12(εE2+μH2).u=\frac12\left(\varepsilon E^2+\mu H^2\right).

These energy-density expressions are not universal. In media exhibiting dispersion, absorption, hysteresis, or time-dependent response, energy storage and transfer to material degrees of freedom require additional treatment. In particular, E⋅∂tD\mathbf E\cdot\partial_t\mathbf D cannot generally be identified with the derivative of 12E⋅D\tfrac12\mathbf E\cdot\mathbf D.

Electromagnetic waves

For a plane electromagnetic wave traveling in vacuum, the electric and magnetic fields are perpendicular to each other and to the propagation direction. Their magnitudes satisfy

B=Ec,B=\frac{E}{c},

where cc is the speed of light in vacuum. Consequently,

S=cu k^,\mathbf S=cu\,\hat{\mathbf k},

where k^\hat{\mathbf k} points in the propagation direction. For such a wave, electromagnetic energy therefore travels at speed cc.

For a sinusoidal, linearly polarized vacuum plane wave with peak electric-field amplitude E0E_0, the cycle-averaged flux is

⟨S⟩=12ε0cE02 k^.\langle\mathbf S\rangle = \frac12\varepsilon_0cE_0^2\,\hat{\mathbf k}.

Its magnitude is commonly called the wave’s intensity.

The relation between energy flow and wave propagation is less simple in matter. In an anisotropic medium, the Poynting vector need not be parallel to the wavevector, which describes the direction of phase advance. This distinction is important in crystal optics, including birefringence. For a plane wave in a homogeneous, isotropic, lossless medium, the fields are mutually transverse and

⟨S⟩=E022η,η=με,\langle S\rangle=\frac{E_0^2}{2\eta}, \qquad \eta=\sqrt{\frac{\mu}{\varepsilon}},

where η\eta is the medium’s wave impedance.

Time averaging and complex notation

Many applications involve sinusoidal fields that oscillate too rapidly for the instantaneous flux to be the most useful quantity. With peak-amplitude phasors defined by

E(t)=Re⁡ ⁣[E~e−iωt],H(t)=Re⁡ ⁣[H~e−iωt],\mathbf E(t)=\operatorname{Re}\!\left[ \widetilde{\mathbf E}e^{-i\omega t} \right], \qquad \mathbf H(t)=\operatorname{Re}\!\left[ \widetilde{\mathbf H}e^{-i\omega t} \right],

the average over one cycle is

⟨S⟩=12Re⁡ ⁣(E~×H~∗).\langle\mathbf S\rangle = \frac12\operatorname{Re}\!\left( \widetilde{\mathbf E}\times\widetilde{\mathbf H}^{*} \right).

The asterisk denotes complex conjugation. If root-mean-square rather than peak-amplitude phasors are used, the factor 1/21/2 is omitted.

The expression

Sc=12E~×H~∗\mathbf S_{\mathrm c} = \frac12\widetilde{\mathbf E}\times\widetilde{\mathbf H}^{*}

is called the complex Poynting vector. Its real part is the average transported power per unit area. Its imaginary part enters the complex power balance and characterizes reactive exchange associated with stored fields; it is not an additional time-averaged outward energy flux. Its sign convention depends on the chosen harmonic time dependence.

This distinction is especially useful for alternating-current systems and antenna near fields, where substantial field energy may be stored and returned during each cycle without being radiated away.

Energy transport in circuits

The Poynting vector also describes energy transfer in ordinary circuits, including steady direct-current circuits. Energy transport does not require a freely propagating wave.

Consider a long cylindrical resistive wire carrying a steady current along its axis. The electric field inside the wire points along the current, while the magnetic field circulates around the wire. Their cross product points radially inward. Electromagnetic energy therefore enters the wire through its lateral surface and is converted into Joule heat.

For an idealized uniform segment of length LL and radius aa,

Hϕ(a)=I2πa,Ez=ΔVL.H_\phi(a)=\frac{I}{2\pi a}, \qquad E_z=\frac{\Delta V}{L}.

The total inward power is

Pin=EzHϕ(a)(2πaL)=IΔV.P_{\mathrm{in}} = E_zH_\phi(a)(2\pi aL) = I\Delta V.

This reproduces the familiar circuit power formula.

In a transmission line, energy is carried principally by fields in the space between and around the conductors. The conductors guide those fields and support the charges and currents required by the boundary conditions. This field description complements circuit theory rather than contradicting it.

Standing waves, interference, and static fields

The presence of electromagnetic fields does not necessarily imply nonzero average energy transport.

An ideal standing wave formed from two equal, oppositely traveling waves has zero cycle-averaged net Poynting vector, although its instantaneous Poynting vector generally oscillates. Energy moves locally during a cycle without producing sustained transport in one direction.

For overlapping fields, the total Poynting vector includes cross terms:

(E1+E2)×(H1+H2).(\mathbf E_1+\mathbf E_2)\times(\mathbf H_1+\mathbf H_2).

It is therefore not generally equal to the sum of the Poynting vectors calculated separately. These cross terms contribute to the spatial redistribution of energy associated with interference.

Static electric and magnetic fields can also produce a nonzero S\mathbf S. In a region with no energy transfer to matter and no time-dependent field energy, Poynting’s theorem requires

∇⋅S=0,\nabla\cdot\mathbf S=0,

not necessarily S=0\mathbf S=0. A nonzero static energy flux thus need not imply energy accumulation or electromagnetic radiation.

Momentum and interpretation

In vacuum, electromagnetic momentum density is related to energy flow by

g=Sc2.\mathbf g=\frac{\mathbf S}{c^2}.

This connects the Poynting vector with radiation pressure and the transfer of momentum when radiation is absorbed, reflected, or scattered.

In matter, separating electromagnetic momentum from material momentum is more subtle. Different formulations assign different portions of the total momentum to fields and matter. Expressions involving E×H/c2\mathbf E\times\mathbf H/c^2 and D×B\mathbf D\times\mathbf B belong to different accounting schemes and cannot be substituted for one another without treating the material contribution consistently.

The Poynting vector should also not be interpreted as a universal map of straight-line rays. In near fields, interfering fields, and structured media, its direction can vary strongly with position and time. Integrated fluxes and the full energy-balance equation are essential for distinguishing energy transmitted through a system, temporarily stored within it, and transferred to matter.