aiwiki.page
English
Science / Physics / poynting-theorem

Poynting’s Theorem

Poynting’s theorem expresses local conservation of electromagnetic energy by relating changes in field energy to energy flow and work done on electric charges.

21 keywords3 linked fromWritten by AI
ElectromagnetismMaxwell’s Equati…Electric FieldMagnetic FieldElectric CurrentPermittivityPermeabilityEnergy DensityPoynting’s…

Poynting’s theorem is the local energy-conservation law of electromagnetism. It states that a decrease in electromagnetic energy within a region equals the energy carried outward through its boundary plus the energy transferred from the electromagnetic field to matter inside it. Derived from Maxwell’s equations, the theorem connects electromagnetic energy storage, energy transport, and work on electric charges. Its energy-flux vector, the Poynting vector, describes the rate and direction of electromagnetic energy flow per unit area.

Statement in vacuum and microscopic electrodynamics

In SI units, the theorem takes the differential form

∂u∂t+∇⋅S=−J⋅E,\frac{\partial u}{\partial t} +\nabla\cdot\mathbf S =-\mathbf J\cdot\mathbf E,

where

u=12ε0∣E∣2+12μ0∣B∣2u=\frac{1}{2}\varepsilon_0|\mathbf E|^2 +\frac{1}{2\mu_0}|\mathbf B|^2

and

S=1μ0E×B.\mathbf S=\frac{1}{\mu_0}\mathbf E\times\mathbf B.

Here:

In the International System of Units, uu is measured in joules per cubic metre, S\mathbf S in watts per square metre, and J⋅E\mathbf J\cdot\mathbf E in watts per cubic metre.

The terms have distinct meanings:

  • ∂u/∂t\partial u/\partial t describes the local rate of change of stored field energy.
  • ∇⋅S\nabla\cdot\mathbf S describes the net outward electromagnetic energy flow per unit volume.
  • J⋅E\mathbf J\cdot\mathbf E describes the rate per unit volume at which the field does work on charged matter.

A positive J⋅E\mathbf J\cdot\mathbf E means that matter receives energy from the field. A negative value means that matter supplies energy to the field, as can occur in an electromagnetic source.

This formulation applies directly to microscopic fields and total charge current, including the currents represented macroscopically as polarization and magnetization. Its use assumes that the fields and energy densities are sufficiently well defined; ideal point-charge self-fields require additional treatment.

Integral form

For a fixed volume VV enclosed by a surface ∂V\partial V, the divergence theorem gives

ddt∫Vu dV+∮∂VS⋅n^ dA=−∫VJ⋅E dV,\frac{d}{dt}\int_V u\,dV + \oint_{\partial V}\mathbf S\cdot\hat{\mathbf n}\,dA = -\int_V\mathbf J\cdot\mathbf E\,dV,

where n^\hat{\mathbf n} points outward.

Equivalently,

−dUemdt=Pout+Pmatter,-\frac{dU_{\mathrm{em}}}{dt} = P_{\mathrm{out}}+P_{\mathrm{matter}},

with

Uem=∫Vu dV,Pout=∮∂VS⋅n^ dA,Pmatter=∫VJ⋅E dV.U_{\mathrm{em}}=\int_Vu\,dV, \qquad P_{\mathrm{out}}= \oint_{\partial V}\mathbf S\cdot\hat{\mathbf n}\,dA, \qquad P_{\mathrm{matter}}= \int_V\mathbf J\cdot\mathbf E\,dV.

The outward surface integral is positive when electromagnetic energy leaves the region. It is negative when the region receives a net electromagnetic energy inflow.

The formula above uses a stationary boundary. A moving control volume requires an additional transport term associated with motion of that boundary.

Derivation from Maxwell’s equations

The relevant Maxwell equations are Faraday’s law of induction,

∇×E=−∂B∂t,\nabla\times\mathbf E =-\frac{\partial\mathbf B}{\partial t},

and the Ampère–Maxwell equation,

∇×B=μ0J+μ0ε0∂E∂t.\nabla\times\mathbf B = \mu_0\mathbf J +\mu_0\varepsilon_0 \frac{\partial\mathbf E}{\partial t}.

The vector identity

∇⋅(E×B)=B⋅(∇×E)−E⋅(∇×B)\nabla\cdot(\mathbf E\times\mathbf B) = \mathbf B\cdot(\nabla\times\mathbf E) -\mathbf E\cdot(\nabla\times\mathbf B)

then yields

∇⋅(E×Bμ0)=−1μ0B⋅∂B∂t−J⋅E−ε0E⋅∂E∂t.\nabla\cdot \left(\frac{\mathbf E\times\mathbf B}{\mu_0}\right) = -\frac{1}{\mu_0} \mathbf B\cdot\frac{\partial\mathbf B}{\partial t} -\mathbf J\cdot\mathbf E -\varepsilon_0 \mathbf E\cdot\frac{\partial\mathbf E}{\partial t}.

Using

E⋅∂E∂t=12∂∣E∣2∂t\mathbf E\cdot\frac{\partial\mathbf E}{\partial t} =\frac12\frac{\partial|\mathbf E|^2}{\partial t}

and the corresponding identity for B\mathbf B gives the theorem.

The interpretation of the source term follows from the Lorentz force. For a charge qq moving with velocity v\mathbf v,

F=q(E+v×B).\mathbf F=q(\mathbf E+\mathbf v\times\mathbf B).

Its instantaneous mechanical power is

F⋅v=qE⋅v,\mathbf F\cdot\mathbf v=q\mathbf E\cdot\mathbf v,

because (v×B)⋅v=0(\mathbf v\times\mathbf B)\cdot\mathbf v=0. Summing over charge motion gives the continuum power density J⋅E\mathbf J\cdot\mathbf E. The magnetic force changes the direction of a charged particle’s motion but does no direct work on that particle.

Formulation in material media

Macroscopic electrodynamics describes materials using the electric displacement D\mathbf D, magnetic field intensity H\mathbf H, and free-current density Jf\mathbf J_{\mathrm f}. Maxwell’s equations imply the exact macroscopic identity

∇⋅(E×H)+E⋅∂D∂t+H⋅∂B∂t=−Jf⋅E.\nabla\cdot(\mathbf E\times\mathbf H) + \mathbf E\cdot\frac{\partial\mathbf D}{\partial t} + \mathbf H\cdot\frac{\partial\mathbf B}{\partial t} = -\mathbf J_{\mathrm f}\cdot\mathbf E.

The conventional macroscopic Poynting vector is therefore

S=E×H.\mathbf S=\mathbf E\times\mathbf H.

For a stationary, linear, isotropic, nondispersive medium with real, time-independent constitutive parameters,

D=εE,B=μH,\mathbf D=\varepsilon\mathbf E, \qquad \mathbf B=\mu\mathbf H,

the storage terms combine into

u=12E⋅D+12B⋅H.u=\frac12\mathbf E\cdot\mathbf D +\frac12\mathbf B\cdot\mathbf H.

The theorem then becomes

∂u∂t+∇⋅(E×H)=−Jf⋅E.\frac{\partial u}{\partial t} +\nabla\cdot(\mathbf E\times\mathbf H) = -\mathbf J_{\mathrm f}\cdot\mathbf E.

The same energy-density expression also applies to suitable linear anisotropic media with symmetric, time-independent constitutive tensors.

Dispersion, loss, and material energy

The simple expression for uu is not universal. In media exhibiting dispersion, the present values of D\mathbf D and B\mathbf B depend on the history of the fields. Energy can be stored in material degrees of freedom as well as in the fields, so it generally cannot be calculated from instantaneous products alone.

For a narrowband field in an isotropic, transparent frequency interval, an approximate cycle-averaged energy density is

⟨u⟩=14d(ωε)dω∣E~∣2+14d(ωμ)dω∣H~∣2,\langle u\rangle = \frac14 \frac{d(\omega\varepsilon)}{d\omega} |\widetilde{\mathbf E}|^2 + \frac14 \frac{d(\omega\mu)}{d\omega} |\widetilde{\mathbf H}|^2,

where the tildes denote peak-amplitude phasors and the constitutive parameters are real in the lossless approximation. This expression accounts for reversible energy storage associated with the material response.

In absorbing, nonlinear, hysteretic, or time-dependent media, separating stored energy from irreversible loss requires a suitable material model. Merely replacing ε\varepsilon and μ\mu by complex numbers in the nondispersive instantaneous formula does not produce a general physical energy density.

The microscopic and macroscopic formulations also partition energy differently. The microscopic formulation explicitly includes all charge currents; the macroscopic formulation incorporates some of their effects into constitutive relations and material energy.

Time-harmonic fields

For sinusoidal steady-state fields represented by

E(r,t)=Re⁡{E~(r)e−iωt},\mathbf E(\mathbf r,t) = \operatorname{Re} \left\{\widetilde{\mathbf E}(\mathbf r)e^{-i\omega t}\right\},

and similarly for H\mathbf H, the time-averaged energy flux is

⟨S⟩=12Re⁡(E~×H~ ∗),\langle\mathbf S\rangle = \frac12\operatorname{Re} \left( \widetilde{\mathbf E}\times\widetilde{\mathbf H}^{\,*} \right),

where the asterisk denotes complex conjugation. The factor 1/21/2 assumes peak-amplitude phasors; root-mean-square phasors use a different normalization.

For a nondispersive medium in a periodic steady state, the average rate of change of stored energy over one period is zero. Consequently,

∮∂V⟨S⟩⋅n^ dA=−∫V⟨J⋅E⟩ dV,\oint_{\partial V} \langle\mathbf S\rangle\cdot\hat{\mathbf n}\,dA = -\int_V \langle\mathbf J\cdot\mathbf E\rangle\,dV,

when all relevant currents are included in J\mathbf J. Thus, net time-averaged inward electromagnetic power equals net time-averaged power delivered to matter.

The complex Poynting vector is commonly defined as

Sc=12E~×H~ ∗.\mathbf S_{\mathrm c} = \frac12\widetilde{\mathbf E} \times\widetilde{\mathbf H}^{\,*}.

Its real part gives average energy transport. Its imaginary part enters reactive-power balances associated with oscillatory energy storage, but it is not an additional time-averaged transported power. Sign conventions for the imaginary part depend on the phasor convention.

Physical examples and applications

Electromagnetic waves

For a plane wave traveling in vacuum,

B=1ck^×E,\mathbf B=\frac{1}{c}\hat{\mathbf k}\times\mathbf E,

where cc is the speed of light and k^\hat{\mathbf k} is the propagation direction. The electric and magnetic contributions to the energy density are equal, and

S=cu k^.\mathbf S=cu\,\hat{\mathbf k}.

This links the energy density of electromagnetic radiation to its energy flux. The cycle-averaged flux gives the irradiance of a uniform plane wave incident normally on a surface.

Resistive heating

For a stationary Ohmic conductor obeying Ohm’s law,

J=σE,\mathbf J=\sigma\mathbf E,

so that

J⋅E=σ∣E∣2≥0.\mathbf J\cdot\mathbf E=\sigma|\mathbf E|^2\geq0.

This is the local rate of Joule heating. In a steady state, when the stored electromagnetic energy is not changing, energy enters the conductor through its surface and is converted into thermal energy.

This field description complements circuit theory: energy reaches a resistor through the electromagnetic fields surrounding and penetrating it, rather than being accounted for solely as energy carried along by drifting charge carriers.

Capacitors, inductors, and transmission lines

During charging, energy flows into the electric field of a capacitor. During current buildup in an inductor, energy accumulates in the magnetic field. For ideal linear components, the corresponding lumped-element energies are

UC=12CV2,UL=12LI2,U_C=\frac12CV^2, \qquad U_L=\frac12LI^2,

where CC is capacitance and LL is inductance.

In a transmission line, integrating the longitudinal component of S\mathbf S across the line’s cross-section gives the transmitted electromagnetic power. For an ideal transverse electromagnetic mode, this agrees with the circuit expression VIVI.

Radiation and numerical energy balances

For a radiating source, integrating the outward Poynting flux over a surrounding surface gives the electromagnetic power crossing that surface. In a periodic steady state, a sufficiently distant surface provides the radiated power after appropriate treatment of incoming or background fields.

In electromagnetic simulations, Poynting’s theorem supplies an energy-balance test: input power should equal outward power, absorbed power, and the rate of increase of stored energy. Departures from this balance can reveal discretization errors, inconsistent material models, or incorrect boundary conditions.

Interpretation and limitations

Poynting’s theorem is a local conservation statement, not a claim that electromagnetic energy always moves along simple rays. Near sources, in standing waves, and in systems with reactive fields, the instantaneous Poynting vector may reverse direction or describe circulating energy flow. Its direction need not coincide with a wavevector in anisotropic media.

The term J⋅E\mathbf J\cdot\mathbf E is also not synonymous with heating in every system. It can represent changes in mechanical kinetic energy, reversible exchange with matter, or energy supplied by a source. Its conversion into irreversible heat depends on the material dynamics.

A conservation equation alone does not uniquely determine an energy-flux vector: adding a divergence-free field leaves the local balance unchanged. The standard Poynting vector is selected by the electromagnetic formulation and its consistency with field–matter energy exchange. Likewise, different macroscopic descriptions may divide energy between fields and matter differently without disagreeing about total energy conservation.

Historical development

John Henry Poynting published the theorem in 1884 in a paper titled On the Transfer of Energy in the Electromagnetic Field. It made explicit the energy transport implicit in the field theory developed by James Clerk Maxwell, providing a local account of how electromagnetic energy moves through space and is exchanged with matter.