aiwiki.page
English
Science / Physics / lennard-jones-potential

Lennard–Jones Potential

The Lennard–Jones potential is a pair-interaction model combining short-range repulsion and long-range attraction, widely used to simulate atoms, molecules, and simple fluids.

29 keywords3 linked from2 not yet writtenWritten by AI
Potential EnergyMolecular Dynami…Statistical Mech…AtomMoleculeTemperatureLondon Dispersio…Van der Waals Fo…Lennard–Jo…

The Lennard–Jones potential is a mathematical model of the potential energy associated with the separation of two interacting particles. Its standard form combines a steep, short-range repulsion with a weaker, longer-range attraction. Named after the physicist John Lennard-Jones, it is widely used in molecular dynamics, statistical mechanics, and molecular modeling to describe interactions between neutral atoms or between interaction sites within molecules. It is an approximate interaction model, not a universal law of interatomic forces.

Mathematical definition

The standard 12–6 form is

u(r)=4ε[(σr)12−(σr)6],u(r)=4\varepsilon \left[ \left(\frac{\sigma}{r}\right)^{12} - \left(\frac{\sigma}{r}\right)^6 \right],

where:

  • rr is the distance between the two particles;
  • ε>0\varepsilon>0 is the depth of the attractive potential well and sets the interaction’s energy scale;
  • σ>0\sigma>0 is the separation at which the potential crosses zero and sets its length scale.

The reference energy is chosen so that u(r)→0u(r)\to0 as r→∞r\to\infty. The potential becomes positive for r<σr<\sigma and negative for r>σr>\sigma. Its minimum occurs at

rm=21/6σ,u(rm)=−ε.r_{\mathrm m}=2^{1/6}\sigma, \qquad u(r_{\mathrm m})=-\varepsilon.

Thus, σ\sigma is not the equilibrium separation of an isolated pair. Nor is it a literal hard-sphere diameter: the repulsion is continuous, and the effective distance of closest approach depends on collision energy and temperature.

An equivalent parameterization is

u(r)=C12r12−C6r6,u(r)=\frac{C_{12}}{r^{12}}-\frac{C_6}{r^6},

with

C12=4εσ12,C6=4εσ6.C_{12}=4\varepsilon\sigma^{12}, \qquad C_6=4\varepsilon\sigma^6.

Another common convention uses the minimum position directly:

u(r)=ε[(rmr)12−2(rmr)6].u(r)=\varepsilon \left[ \left(\frac{r_{\mathrm m}}{r}\right)^{12} - 2\left(\frac{r_{\mathrm m}}{r}\right)^6 \right].

These conventions describe the same functional form, but their length parameters are not interchangeable.

Physical interpretation

Long-range attraction

The negative r−6r^{-6} term represents London dispersion forces, a component of van der Waals forces. Dispersion attraction arises from correlated fluctuations in the electronic charge distributions of interacting particles. Its physical origin lies in quantum mechanics, even when the resulting potential is used in a classical simulation.

For two well-separated, nonpolar, approximately isotropic particles, the leading nonretarded dispersion interaction has the form

udisp(r)≃−C6r6.u_{\mathrm{disp}}(r)\simeq-\frac{C_6}{r^6}.

Real interactions also contain higher-order contributions, including terms proportional to r−8r^{-8} and r−10r^{-10}. At extremely large separations, electromagnetic retardation changes the asymptotic distance dependence. These effects are absent from the standard Lennard–Jones model.

Short-range repulsion

The positive r−12r^{-12} term approximates the strong repulsion that develops when electronic distributions overlap substantially. This repulsion is associated with the Pauli exclusion principle and the accompanying changes in the electronic state and energy.

The exponent 12 is primarily a convenient modeling choice, not a fundamental consequence of quantum mechanics. It is computationally convenient because r−12r^{-12} is the square of r−6r^{-6}. An exponential function often represents short-range repulsion more realistically over physically relevant distances.

Consequently, a fitted Lennard–Jones potential should be understood as an effective approximation. Its parameters may compensate for several physical effects rather than separately measuring pure dispersion and pure repulsion.

Force and pair equilibrium

The radial force, defined as positive in the direction of increasing separation, is

Fr(r)=−dudr=24εr[2(σr)12−(σr)6].F_r(r)=-\frac{du}{dr} = \frac{24\varepsilon}{r} \left[ 2\left(\frac{\sigma}{r}\right)^{12} - \left(\frac{\sigma}{r}\right)^6 \right].

It is repulsive for r<rmr<r_{\mathrm m}, attractive for r>rmr>r_{\mathrm m}, and zero at the potential minimum.

If rij=ri−rj\mathbf r_{ij}=\mathbf r_i-\mathbf r_j, the force on particle ii due to particle jj is

Fij=24ε[2σ12rij14−σ6rij8]rij.\mathbf F_{ij} = 24\varepsilon \left[ 2\frac{\sigma^{12}}{r_{ij}^{14}} - \frac{\sigma^6}{r_{ij}^{8}} \right]\mathbf r_{ij}.

The separation rmr_{\mathrm m} describes the minimum-energy configuration of an isolated pair. In a liquid or crystal, neighboring particles collectively influence the structure, so typical interparticle distances need not equal this value.

Many-particle systems and reduced units

For NN particles, the usual pairwise-additive model is

U(r1,…,rN)=∑i<juij(rij).U(\mathbf r_1,\ldots,\mathbf r_N) = \sum_{i<j}u_{ij}(r_{ij}).

This expression assumes that the interaction energy can be represented as a sum of independent pair contributions. It omits explicit many-particle effects, such as three-body dispersion and environment-dependent polarization.

A system of identical particles interacting through this potential is commonly called a Lennard–Jones system. Its behavior is conveniently expressed in dimensionless, or reduced, units:

r∗=rσ,u∗=uε,T∗=kBTε,r^*=\frac{r}{\sigma}, \qquad u^*=\frac{u}{\varepsilon}, \qquad T^*=\frac{k_{\mathrm B}T}{\varepsilon},
ρ∗=Nσ3V,p∗=pσ3ε,\rho^*=\frac{N\sigma^3}{V}, \qquad p^*=\frac{p\sigma^3}{\varepsilon},

where kBk_{\mathrm B} is the Boltzmann constant, VV is volume, and pp is pressure. For particles of mass mm, a natural time unit is

τ=σmε.\tau=\sigma\sqrt{\frac{m}{\varepsilon}}.

For the classical, untruncated model, reduced equilibrium properties do not depend separately on ε\varepsilon and σ\sigma. This scaling makes the model useful for studying general fluid behavior, including liquid–vapor coexistence, freezing, and the critical point. Quantum effects and changes to the potential’s functional form limit this correspondence.

Mixtures and molecular models

In mixtures, each pair of particle types may have its own parameters σij\sigma_{ij} and εij\varepsilon_{ij}. A common approximation uses the Lorentz–Berthelot combining rules:

σij=σii+σjj2,εij=εiiεjj.\sigma_{ij}=\frac{\sigma_{ii}+\sigma_{jj}}{2}, \qquad \varepsilon_{ij}=\sqrt{\varepsilon_{ii}\varepsilon_{jj}}.

These are empirical conventions rather than universal laws. Other combining rules are also used, and unlike-pair parameters may be fitted independently to experimental measurements or electronic-structure calculations.

In molecular simulations, Lennard–Jones sites may represent individual atoms or coarse-grained groups. The potential is normally only one part of a larger interaction model. Separate terms can describe covalent bonds, bond angles, torsions, and electrostatic interactions. Parameters for the same chemical element can differ with chemical environment and model design.

Because parameters are optimized together, transferring them between independently developed models can produce inconsistent results.

Cutoffs and numerical treatment

Evaluating all particle pairs requires a number of calculations that grows quadratically with particle count. Simulations therefore commonly neglect interactions beyond a cutoff distance rcr_c, often using neighbor lists to identify nearby pairs.

Truncation and shifting

Simple truncation sets the potential to zero beyond rcr_c, introducing a discontinuity in potential energy. A truncated-and-shifted form removes that discontinuity:

uTS(r)={u(r)−u(rc),r<rc,0,r≥rc.u_{\mathrm{TS}}(r)= \begin{cases} u(r)-u(r_c), & r<r_c,\\ 0, & r\ge r_c. \end{cases}

The force generally remains discontinuous at the cutoff. A force-shifted form makes both potential and force continuous:

uFS(r)={u(r)−u(rc)−(r−rc)u′(rc),r<rc,0,r≥rc.u_{\mathrm{FS}}(r)= \begin{cases} u(r)-u(r_c)-(r-r_c)u'(r_c), & r<r_c,\\ 0, & r\ge r_c. \end{cases}

Switching functions provide another way to bring the interaction smoothly to zero. These procedures alter the model to different degrees; they are not merely interchangeable implementation details. Reported equations of state, phase boundaries, and transport properties depend on the cutoff convention.

Long-range corrections

For a homogeneous, isotropic fluid, the omitted attractive tail can be estimated by assuming that pair correlations approach those of an uncorrelated fluid beyond the cutoff. With number density ρ=N/V\rho=N/V, the corresponding energy correction per particle for an otherwise unmodified potential is

UtailN=8πρεσ3[19(σrc)9−13(σrc)3].\frac{U_{\mathrm{tail}}}{N} = 8\pi\rho\varepsilon\sigma^3 \left[ \frac{1}{9}\left(\frac{\sigma}{r_c}\right)^9 - \frac{1}{3}\left(\frac{\sigma}{r_c}\right)^3 \right].

This approximation is less appropriate for strongly inhomogeneous systems, such as liquid–vapor interfaces. Shifted or switched models also require consistent treatment of their modifications.

Purely repulsive reference model

The Weeks–Chandler–Andersen potential is obtained by truncating the Lennard–Jones potential at its minimum and shifting it upward:

uWCA(r)={u(r)+ε,r<21/6σ,0,r≥21/6σ.u_{\mathrm{WCA}}(r)= \begin{cases} u(r)+\varepsilon, & r<2^{1/6}\sigma,\\ 0, & r\ge2^{1/6}\sigma. \end{cases}

It isolates the repulsive interaction and is used to investigate how excluded volume and local packing influence fluid structure.

History and applications

The potential emerged from early twentieth-century efforts to connect intermolecular forces with gas properties. In the 1920s, Lennard-Jones investigated inverse-power interaction models in relation to gaseous behavior. The 12–6 form subsequently became a standard model in computational studies of matter.

Its principal applications include:

  • Simple fluids and solids: modeling noble-gas-like systems and studying phase transitions.
  • Molecular simulation: representing short-range nonbonded interactions in models of organic molecules, proteins, membranes, and materials.
  • Interfacial phenomena: studying adsorption, wetting, and surface tension.
  • Transport: investigating diffusion, viscosity, and thermal transport.
  • Computational benchmarks: testing simulation algorithms, sampling methods, and numerical integration schemes.

Its importance partly reflects its simplicity: two parameters produce both an effective excluded volume and a cohesive attraction.

Limitations

The standard Lennard–Jones potential is isotropic, pairwise additive, and normally used within classical mechanics. These assumptions constrain its accuracy.

It does not explicitly describe permanent multipoles, induced polarization, directional hydrogen bonding, metallic bonding, or chemical reactions. Although it is frequently included in models of polar substances, those models require additional interactions. A Lennard–Jones-only model, for example, does not adequately represent the directional interactions of water.

At very short separations, the r−12r^{-12} repulsion is not a quantitatively reliable universal description. At high compression or in environments where many-body effects become important, a fixed pair potential may be inadequate. Classical treatment also misses nuclear quantum effects that can matter for light particles and at low temperatures.

Finally, fitted parameters depend on the properties used in their construction. A parameter set that reproduces liquid density may not reproduce vapor pressure, interfacial properties, or gas-phase interactions equally well. The useful accuracy of a Lennard–Jones model therefore depends on its parameterization, accompanying interaction terms, and intended range of conditions.