An exciton is an electrically neutral excitation in which an electron and an electron hole are bound by their electrostatic attraction. It is a quasiparticle: a collective excitation of a material that can be described, under suitable conditions, as a particle with its own energy, momentum, and lifetime. Excitons occur in semiconductors, insulators, molecular crystals, and other systems. They are central to how these materials absorb, transport, and emit light. Unlike an unbound electron–hole pair, a bound exciton has an energy below the corresponding continuum of separated electron and hole states.
Physical description
In a semiconductor or insulator, absorbing a photon can promote an electron from an occupied electronic state to an unoccupied one. The absence left behind behaves as a positively charged hole. In the simplest description based on electronic band structure, the electron occupies the conduction band and the hole belongs to the valence band.
The electron and hole attract one another through the interaction described by Coulomb’s law. Other charges in the material screen this attraction, reducing it relative to the interaction in vacuum. When the attraction supports a bound state, the resulting excitation is an exciton.
The hole is not a positron, and exciton recombination is not electron–positron annihilation. Recombination restores the electronic occupation of the material, releasing the excitation energy as light or transferring it to other degrees of freedom.
An exciton has zero net electric charge, so its motion does not directly carry a net charge current. It can nevertheless transport energy and, in some systems, spin or valley polarization. An exciton can also possess an electric dipole and respond to electric fields despite being neutral.
Its internal electron–hole separation must be distinguished from its overall spatial motion. A tightly bound pair can have its excitation coherently distributed over many molecular sites, while a spatially extended electron–hole pair can have its center of mass localized by disorder.
Principal types
Wannier–Mott excitons
A Wannier–Mott exciton has an electron–hole separation that is large compared with the lattice spacing. It is common in semiconductors where dielectric screening is substantial and the electron and hole can be described by effective masses.
Because the pair extends across many unit cells, its internal motion can often be approximated by a hydrogen-like model, with the material’s dielectric response and carrier effective masses replacing the vacuum parameters. In conventional bulk semiconductors, binding energies often range from a few to a few tens of millielectronvolts, although the range is strongly material-dependent.
Frenkel excitons
A Frenkel exciton is tightly bound, typically on the scale of an atom, molecule, or unit cell. The electron and hole are associated with the same local structural unit, making this description especially useful for molecular crystals and many organic materials.
The excitation can move through interactions between neighboring units even when the individual charges remain strongly localized. Frenkel-exciton binding energies are generally larger than those of conventional bulk Wannier–Mott excitons and can reach fractions of an electronvolt or more.
Charge-transfer excitons
A charge-transfer exciton has its electron and hole predominantly on different molecular units, atomic sites, or regions of a material. Such states are important at donor–acceptor interfaces and in some ionic and molecular solids.
Frenkel, charge-transfer, and Wannier–Mott descriptions are limiting pictures rather than mutually exclusive categories. Actual exciton states can mix their characteristics.
Interlayer and other spatially indirect excitons
In coupled quantum wells or stacked atomically thin layers, the electron and hole can occupy different layers. These interlayer excitons, or spatially indirect excitons, have a dipole directed approximately perpendicular to the layers. Reduced electron–hole overlap can suppress radiative recombination and lengthen their lifetime.
Spatially indirect should not be confused with momentum-indirect. The former concerns the locations of the electron and hole; the latter concerns whether their momenta permit direct photon emission.
Binding energy and the hydrogen-like model
The exciton binding energy is the energy required to separate a bound electron–hole pair into unbound carriers at the corresponding continuum threshold. For a simple direct-gap semiconductor, the lowest optically allowed exciton resonance is approximately
where is the quasiparticle band gap. This relation assumes that the resonance and continuum being compared belong to the same electronic transition. It need not describe the lowest observed emission when dark states, lattice relaxation, or momentum-indirect processes are involved.
For an isotropic, three-dimensional Wannier–Mott exciton, the relative-motion Schrödinger equation can be written
where:
- is the electron–hole reduced effective mass;
- is the elementary charge;
- is the vacuum permittivity;
- is the relative permittivity used to describe screening;
- is the electron–hole separation;
- is the reduced Planck constant.
The reduced mass satisfies
where and are the electron and hole effective masses. The model gives the ground-state binding energy
and characteristic radius
It also predicts a hydrogen-like series of bound levels with energies , measured relative to the unbound-pair threshold.
These expressions explain why stronger screening generally weakens binding and increases exciton size. They are approximations, not universal laws for excitons. Band anisotropy, nonparabolic dispersion, electron–hole exchange, lattice coupling, and spatially nonlocal screening can substantially modify the spectrum.
Two-dimensional materials
Excitons in atomically thin semiconductors can be much more strongly bound than those in conventional bulk materials. Reduced dimensionality and weak environmental screening enhance the electron–hole interaction.
The surrounding substrate and encapsulation layers can affect both binding energies and optical transition energies. Screening is generally distance-dependent, so a simple Coulomb potential with a single dielectric constant often fails to reproduce the full spectrum. As a result, excited exciton levels need not follow the three-dimensional hydrogenic series.
Formation, transport, and decay
Excitons can be created directly by resonant optical absorption or form when initially unbound electrons and holes lose energy and become bound. Energy and momentum may be transferred to phonons, other carriers, or other excitations during formation and relaxation.
Their subsequent behavior depends on the material:
- Coherent propagation: exciton states can extend across an ordered structure and propagate with a well-defined dispersion.
- Diffusive transport: scattering randomizes motion, producing diffusion over longer distances and times.
- Hopping: in disordered molecular systems, excitation energy can move between localized sites.
- Trapping and self-trapping: defects, disorder, or lattice distortion can localize an exciton.
Excitons have finite lifetimes. Radiative recombination emits a photon. Nonradiative recombination transfers energy to lattice vibrations, defects, or other carriers. Excitons can also dissociate into free carriers through thermal excitation, electric fields, or interfacial charge transfer.
Comparing with the thermal scale , where is the Boltzmann constant, gives a useful indication of thermal stability. It is not a complete criterion: populations also depend on carrier density, entropy, formation and dissociation rates, and whether equilibrium has been reached.
At sufficiently high densities, screening and overlap can undermine the bound-exciton description, producing an electron–hole plasma. This crossover or transition is commonly discussed as an excitonic Mott transition. Exciton–exciton encounters can also cause annihilation processes that reduce the excitation population.
Bright and dark states
An exciton is bright if it couples to light through an allowed optical transition under the relevant conditions. It is dark if that coupling is forbidden or strongly suppressed.
Darkness can arise from spin selection rules, crystal symmetry, or momentum mismatch. In a translationally invariant material, an emitted photon carries relatively little momentum compared with typical electronic crystal momenta. Consequently, only excitons within a small momentum region—the radiative light cone—can recombine directly without another process taking up momentum.
Dark excitons can become optically accessible through phonon assistance, disorder, applied fields, or changes in measurement geometry. Bright and dark labels therefore describe particular states and coupling conditions, not an absolute division between excitons that can and cannot ever emit light.
Composite particles and collective behavior
An electron and a hole are both fermionic quasiparticles. At low densities, their bound pair can approximately behave as a boson. This approximation becomes less accurate when excitons strongly overlap, because their constituent particles remain subject to the Pauli exclusion principle.
Several related excitations are distinguished from a single exciton:
- A biexciton is a bound complex of two excitons.
- A trion is a charged complex commonly described as an exciton bound to an additional electron or hole.
- An exciton polaron describes an excitonic excitation dressed by interactions with a surrounding medium, such as a gas of mobile carriers.
- An exciton–polariton is a hybrid light–matter excitation produced by strong coupling between an exciton and an electromagnetic mode.
Long-lived excitons are studied as possible systems for collective quantum phases related to Bose–Einstein condensation. Exciton–polariton systems also exhibit condensation phenomena, often under driven, dissipative conditions. These should be distinguished from equilibrium condensation of a conserved gas of particles.
An excitonic insulator is a proposed or realized, depending on the material and interpretation, electronic phase involving spontaneous electron–hole coherence. Establishing that a particular transition is primarily excitonic rather than driven by structural changes or other interactions requires material-specific evidence.
Observation and theoretical treatment
Spectroscopy reveals excitons through resonances and changes in optical response. Common methods include absorption, reflectance, photoluminescence, and time-resolved pump–probe measurements.
Absorption probes optically accessible excitations, whereas photoluminescence reflects the states populated before emission. Their peak energies can differ because of relaxation, trapping, phonon involvement, or bright–dark energy splittings.
Binding energy is not generally determined from a luminescence peak alone. It requires information about the relevant unbound electron–hole continuum, an adequately resolved series of excitonic states, or a suitable combination of experiments and theory.
Microscopic calculations often use the Bethe–Salpeter equation to account for correlated electron–hole motion on top of an electronic-structure calculation. A description based only on independent electrons generally misses bound exciton states and can misrepresent optical intensities near an absorption edge.
Applications and historical development
Excitons are important in semiconductor light emitters, organic light-emitting devices, photodetectors, and solar-energy materials. In photovoltaics, an absorbed excitation must ultimately yield separated charges for electrical extraction. Exciton binding, diffusion, and interfacial dissociation can therefore control performance, particularly in organic devices.
In photosynthesis, coupled pigment molecules support excitonic states that help describe the absorption and redistribution of excitation energy. This does not imply loss-free transport or universally long-lived quantum coherence under biological conditions.
Excitonic resonances also provide sensitive probes of disorder, strain, dielectric surroundings, and interactions in low-dimensional materials.
The modern concept developed in early solid-state theory. Yakov Frenkel introduced a localized-excitation description in 1931. Gregory Wannier and Nevill Mott developed the extended electron–hole picture in the late 1930s. Subsequent optical studies, notably of cuprous oxide, established resolved exciton spectra and provided detailed tests of the hydrogen-like description.