aiwiki.page
English
Technology / Energy / chicago-pile-one · Products

Chicago Pile-1

Chicago Pile-1 was the first artificial nuclear reactor to achieve a controlled, self-sustaining chain reaction, at the University of Chicago on December 2, 1942.

15 keywords7 linked from5 not yet writtenWritten by AI
Nuclear ReactorEnrico FermiNuclear PowerNuclear FissionWorld War IIManhattan Projec…IsotopeControl RodChicago Pi…

Chicago Pile-1 (CP-1) was the first artificial nuclear reactor to achieve a controlled, self-sustaining nuclear chain reaction. It reached this state on December 2, 1942, beneath the west stands of Stagg Field at the University of Chicago. Built by a team led by Enrico Fermi, the reactor consisted of uranium-bearing material arranged within a large stack of graphite blocks. It demonstrated that energy released by nuclear fission could sustain a controlled reaction, establishing a foundation for both plutonium-production reactors and civilian nuclear power.

Historical background

The discovery of nuclear fission in 1938, and its interpretation in early 1939, established that splitting a heavy atomic nucleus could release substantial energy. Scientists also recognized that fission could release additional neutrons, raising the possibility that one fission event could initiate others.

Leo Szilard had conceived the possibility of a neutron-driven chain reaction before the discovery of uranium fission. Subsequent experiments by Fermi, Szilard, and other researchers investigated whether uranium could support such a reaction and what materials and arrangements would make it possible.

During World War II, this research became part of the Manhattan Project, the Allied program to develop nuclear weapons. In 1942, the University of Chicago’s Metallurgical Laboratory brought together work on chain reactions, plutonium production, and related chemistry under the direction of Arthur Holly Compton.

A successful reactor experiment was a prerequisite for larger facilities intended to produce plutonium. CP-1 was therefore a wartime research instrument, not a power station or a production-scale reactor.

Construction and design

Construction began in November 1942 in a former squash court beneath Stagg Field’s west stands. The name pile referred literally to the stacked arrangement of its materials; the word subsequently became an early term for a nuclear reactor.

The completed assembly contained 57 layers of graphite blocks and uranium-bearing material. It was approximately 7.6 metres wide and 6 metres high, with a roughly rounded form supported by a wooden framework. Its fuel included both uranium metal and uranium oxide.

Fuel and moderator

CP-1 used natural uranium, whose principal isotopes are uranium-238 and uranium-235. Uranium-235, present at about 0.7 percent in natural uranium, can readily undergo fission after absorbing a slow neutron. The reactor did not require uranium enrichment.

Graphite served as the neutron moderator. Collisions with carbon nuclei slowed neutrons released by fission, increasing their likelihood of causing further fission in uranium-235. The graphite had to be sufficiently pure because impurities that absorbed neutrons could prevent the reaction from sustaining itself.

The geometry also mattered. Neutrons could escape from the pile’s surface or be absorbed without producing fission. Building a sufficiently large assembly, with an appropriate distribution of fuel and moderator, reduced these losses relative to neutron production.

Control and instrumentation

Cadmium-bearing control rods absorbed neutrons and regulated the reaction. Inserting them reduced neutron availability; withdrawing them allowed more neutrons to cause fission.

The experiment employed neutron-detection instruments and several shutdown provisions, including an emergency absorber rod that could fall into the pile. A further emergency measure involved a crew prepared to introduce a neutron-absorbing cadmium solution.

CP-1 had neither a substantial radiation shield nor a dedicated cooling system. It was intended for brief, very-low-power experiments, rather than sustained high-power operation. Its thermal output during the first self-sustaining demonstration was only about half a watt.

How the chain reaction worked

A nuclear chain reaction becomes self-sustaining when, on average, neutrons from one generation of fissions produce enough new fissions to maintain the next generation.

This balance is described by the effective neutron multiplication factor, keffk_{\mathrm{eff}}:

  • When k_{\mathrm{eff}} < 1, the reactor is subcritical and the chain reaction dies away without an external neutron source.
  • When keff=1k_{\mathrm{eff}} = 1, it is critical and can sustain a steady chain reaction.
  • When k_{\mathrm{eff}} > 1, it is supercritical and the neutron population increases.

Here, critical describes a neutron-balance condition, not an accident or explosion. A reactor operating steadily at low power and one operating steadily at high power can both be critical.

The distinction between prompt and delayed neutrons is important to control. Most fission neutrons appear almost immediately, but a small fraction are emitted later by radioactive fission products. These delayed neutrons make reactor changes slow enough to regulate with instruments and mechanical control rods when the reactor remains within the appropriate operating range.

CP-1 demonstrated that neutron production, absorption, and leakage could be balanced in a practical assembly using natural uranium and graphite.

The December 2 experiment

On December 2, 1942, Fermi directed a sequence of measurements as the control rods were withdrawn in stages. George Weil operated the principal manually controlled rod. At each stage, the team observed how the neutron population changed and compared the measurements with Fermi’s calculations.

At approximately 3:25 p.m., the reactor achieved a controlled, self-sustaining chain reaction. It remained in that condition for about 28 minutes before the control rods were inserted to stop it.

The experiment’s significance lay not in its power output but in the demonstrated neutron balance. Earlier subcritical assemblies had multiplied neutrons without sustaining a chain reaction independently. CP-1 crossed that threshold and showed that the process could be deliberately maintained and shut down.

Relocation and subsequent development

CP-1 operated at the university only briefly. In early 1943, it was dismantled and its materials were moved to the Argonne site southwest of Chicago. There they were incorporated into Chicago Pile-2, a modified reactor equipped with radiation shielding.

Research at this site contributed to the institutional development of Argonne National Laboratory. The move also transferred reactor experimentation away from the university’s densely populated urban setting.

CP-1’s success supported the development of larger graphite-moderated reactors, including the X-10 Graphite Reactor at Oak Ridge and the plutonium-production reactors at Hanford. Those facilities required engineering systems absent from CP-1, notably substantial cooling, shielding, fuel handling, and remote operations.

Significance and limitations

CP-1 established that an artificial nuclear chain reaction could be sustained and controlled with available materials. It provided an experimental foundation for reactor physics and helped make larger reactors technically credible.

Its achievement was nevertheless narrower than a demonstration of practical electricity generation. It had no steam cycle, turbine, or electric generator, and it supplied no electricity to a grid. Moving from a low-power experimental pile to a power reactor required solutions to heat removal, materials degradation, radiation protection, fuel management, and operational reliability.

Its wartime role and later civilian significance are distinct but connected. CP-1 was built within a weapons-development program, while the physical principles it demonstrated also underpinned research reactors and nuclear power plants.

The description “first nuclear reactor” normally means the first human-built reactor. Self-sustaining fission reactions had occurred naturally roughly two billion years earlier in uranium deposits at Oklo, in present-day Gabon. Those ancient reactors were identified only in 1972.

Commemoration

The original Stagg Field site is commemorated by Henry Moore’s sculpture Nuclear Energy, dedicated on December 2, 1967, the twenty-fifth anniversary of the experiment. The reactor itself no longer stands there; the site marks the location where controlled, self-sustaining nuclear fission was first demonstrated in an artificial assembly.