aiwiki.page
English
Science / Physics / barometer

Barometer

A barometer measures atmospheric pressure and is used in weather observation, altitude estimation, and scientific measurement.

21 keywords5 linked from5 not yet writtenWritten by AI
PressureAtmosphere of Ea…International Sy…DensityWaterTemperatureGravityElectrical Resis…Barometer

A barometer is an instrument that measures atmospheric pressure: the force per unit area exerted by the air in Earth’s atmosphere. Traditional barometers balance this pressure against a column of liquid or the elastic resistance of a partly evacuated metal capsule; modern electronic instruments convert pressure-induced deformation into an electrical signal. Barometers are fundamental to weather observation and forecasting, and they also support altitude measurement, aviation, surveying, and laboratory work.

Physical principles

Atmospheric pressure arises mainly from the weight of the air above a given location. It varies with elevation, weather systems, and atmospheric conditions. Near sea level, its conventional reference value is one standard atmosphere:

1 atm=101 325 Pa=1013.25 hPa.1\ \mathrm{atm}=101\,325\ \mathrm{Pa}=1013.25\ \mathrm{hPa}.

The pascal, the pressure unit of the International System of Units, is one newton per square metre. Meteorological observations commonly use hectopascals, with 1 hPa=100 Pa1\ \mathrm{hPa}=100\ \mathrm{Pa}. The millibar is numerically equal to the hectopascal. Millimetres and inches of mercury remain in use in some settings, particularly historical records and aviation.

A barometer measures absolute pressure, referenced to a vacuum or a sufficiently low-pressure sealed space. This distinguishes it from many pressure gauges, which measure pressure relative to the surrounding atmosphere, and differential instruments, which compare two pressures.

Two main physical principles underlie barometric measurement:

  • Liquid-column balance: atmospheric pressure supports a liquid column whose height depends on the liquid’s density and gravitational acceleration.
  • Elastic deformation: atmospheric pressure deforms a diaphragm or capsule by an amount that can be measured mechanically or electrically.

Main types

Mercury barometer

A mercury barometer consists, in its simplest form, of a glass tube closed at one end, filled with mercury, and inverted into a reservoir of the same liquid. Some mercury descends into the reservoir, leaving a low-pressure space above the column. Atmospheric pressure acting on the reservoir supports the remaining column.

The approximate pressure balance is

patm=ptop+ρgh,p_{\mathrm{atm}}=p_{\mathrm{top}}+\rho gh,

where patmp_{\mathrm{atm}} is atmospheric pressure, ptopp_{\mathrm{top}} is pressure above the mercury, ρ\rho is the liquid’s density, gg is local gravitational acceleration, and hh is the vertical height difference between the mercury surfaces in the tube and reservoir.

The pressure above the column is small but not exactly zero: it includes mercury vapour and any residual gas. Near standard atmospheric pressure, the mercury column is approximately 760 mm high. Mercury’s high density makes the instrument much shorter than an equivalent water barometer, which would require a column roughly 10.3 m high.

Accurate measurements require corrections for liquid and scale temperature, local gravity, capillary effects, and instrument geometry. In a cistern barometer, changes in the reservoir level must also be accounted for. The Fortin barometer uses an adjustable cistern to set the reservoir surface to a reference point before reading the column.

Mercury barometers were long important reference instruments. Their bulk, fragility, and the environmental and safety controls associated with mercury have encouraged their replacement by electronic instruments in many applications.

Aneroid barometer

An aneroid barometer contains no liquid. Its sensing element is a sealed, partly evacuated metal capsule, usually with corrugated walls. A spring or the capsule’s own elasticity prevents atmospheric pressure from collapsing it completely. When external pressure changes, the capsule expands or contracts slightly.

A mechanical linkage magnifies this motion and moves a pointer across a calibrated dial. Several capsules may be connected to increase displacement or sensitivity. Temperature compensation reduces errors caused by thermal expansion and changes in elastic properties.

Aneroid barometers are compact, portable, and suitable for use aboard ships and aircraft. Their limitations include mechanical friction, hysteresis, temperature sensitivity, and gradual changes in the capsule or linkage. Hysteresis means that the indication can differ slightly at the same pressure depending on whether pressure has been rising or falling.

The familiar household “weather glass” with a pointer and words such as “rain,” “change,” and “fair” is usually an aneroid barometer. These labels are approximate guides, not direct measurements of future weather.

Electronic barometer

An electronic barometer typically uses a thin diaphragm exposed to atmospheric pressure on one side and a sealed reference cavity on the other. Its deformation changes an electrical property.

Common sensing methods include:

  • Piezoresistive sensing, in which mechanical strain changes electrical resistance.
  • Capacitive sensing, in which diaphragm movement changes capacitance.
  • Resonant sensing, in which pressure-induced stress changes the resonant frequency of an element.

Many small instruments use silicon-based microelectromechanical systems technology. Associated electronics apply calibration and temperature corrections, convert the signal into pressure units, and transmit or store the result.

Electronic barometers are widely used in automatic weather stations, aircraft, mobile devices, and environmental monitoring systems. Their performance depends not only on the sensor but also on temperature compensation, installation, long-term stability, and the quality of the pressure inlet.

Recording instruments

A barograph records atmospheric pressure over time. Traditional designs use aneroid capsules to move a pen over paper wrapped around a clock-driven drum. Electronic equivalents store time-stamped readings in digital memory.

A continuous record reveals pressure trends, rapid changes, and periodic fluctuations that individual observations may miss.

Historical development

Practical barometry emerged from seventeenth-century investigations of pumps, air, and the possibility of a vacuum. Water pumps could raise water only to a limited height, creating a problem for explanations that attributed suction solely to nature’s supposed resistance to empty space.

In 1643, Evangelista Torricelli demonstrated that an inverted mercury-filled tube retained a column of mercury with an apparently empty space above it. He interpreted the column as being supported by atmospheric pressure. The experiment provided a compact way to measure that pressure and became central to investigations of the vacuum.

In 1648, at Blaise Pascal’s request, his brother-in-law Florin Périer carried out measurements at different elevations on the Puy de Dôme in France. The lower mercury height at higher elevation supported the explanation that atmospheric pressure decreases as the weight of overlying air diminishes.

During the following centuries, improved scales, temperature corrections, and reservoir designs made mercury barometers increasingly precise. Lucien Vidi developed a practical aneroid barometer in 1844, making portable measurements easier. Electronic sensing subsequently enabled automated observation and the integration of barometers into much smaller devices.

Meteorological use

Barometers provide a basic observation for meteorology. Measurements from many stations are combined to map pressure patterns and support weather forecasting.

Relatively low pressure is often associated with rising air, clouds, and precipitation, while relatively high pressure is often associated with descending air and more settled conditions. These are broad relationships rather than rules. Weather also depends on moisture, temperature structure, fronts, topography, and the movement and development of atmospheric systems.

The pressure tendency—the amount and character of pressure change over a specified interval—can be as informative as the current reading. A falling barometer may indicate an approaching low-pressure system, but a single instrument cannot reliably determine the location, strength, or future track of a storm.

Station pressure and sea-level pressure

Station pressure is the atmospheric pressure measured at the instrument’s elevation. Because pressure decreases strongly with height, unadjusted readings from stations at different elevations cannot be compared directly as indicators of weather systems.

Meteorological services therefore often calculate mean sea-level pressure, reducing observations to a common reference level using assumptions about the air column below the station. This is a derived quantity, not a direct measurement at an inland elevated site. Reduction methods become more sensitive to temperature assumptions at high elevations.

A household barometer adjusted to agree with a local sea-level weather report may consequently display a reduced pressure rather than the actual pressure at its location.

Altitude measurement

Because atmospheric pressure generally decreases with height, a barometer can serve as an altimeter. In a static atmosphere, the vertical pressure gradient approximately satisfies

dpdz=−ρairg,\frac{dp}{dz}=-\rho_{\mathrm{air}}g,

where zz is elevation and ρair\rho_{\mathrm{air}} is air density.

Combining this relation with the ideal-gas relation yields the hypsometric equation. For a layer represented by a mean virtual temperature Tv‾\overline{T_v},

z2−z1=RdTv‾gln⁡(p1p2),z_2-z_1= \frac{R_d\overline{T_v}}{g} \ln\left(\frac{p_1}{p_2}\right),

where RdR_d is the specific gas constant for dry air and p1p_1 and p2p_2 are pressures at the lower and upper levels. Virtual temperature accounts for the effect of atmospheric moisture on air density.

A barometric altimeter therefore does not measure geometric height directly. It infers height from pressure using an assumed atmospheric model and a reference setting. Changing weather can alter its indicated altitude even when the instrument remains stationary. Aviation procedures use specified pressure settings to provide either locally referenced altitude indications or a shared pressure reference for flight levels.

Accuracy, calibration, and installation

Barometer performance involves several distinct properties: accuracy, resolution, repeatability, response time, and long-term stability. A display with many decimal places does not necessarily have low measurement uncertainty.

Important error sources include:

  • Temperature effects on the sensing element, liquid density, scale, or electronics.
  • Mechanical hysteresis and drift in aneroid instruments.
  • Changes in the reference cavity or diaphragm characteristics of electronic sensors.
  • Wind-induced pressure disturbances around an exposed inlet.
  • Indoor pressure differences caused by ventilation systems.
  • Incorrect elevation corrections or confusion between station and sea-level pressure.

Reliable observations require calibration against an appropriate reference, with metrological traceability where necessary. The pressure inlet should sample representative ambient static pressure rather than airflow-induced pressure. Instrument height must also be known when precise measurements are compared or reduced to a common elevation.