Ultraviolet (UV) is electromagnetic radiation with wavelengths shorter than those of violet visible light and longer than those conventionally assigned to X-rays. Its commonly stated range is approximately 10–400 nanometres, although boundaries and subdivisions vary among scientific and technical fields. Most ultraviolet radiation is invisible to human vision. Its name means “beyond violet,” referring to its position beyond the violet end of the visible spectrum.
Ultraviolet photons can excite electrons, initiate chemical reactions, and, at sufficiently short wavelengths, ionize matter. These properties connect UV radiation to atmospheric chemistry, biological damage and adaptation, astronomical observation, disinfection, analytical measurement, and semiconductor manufacturing. Solar ultraviolet radiation helps determine the chemistry of Earth’s atmosphere, while atmospheric absorption strongly limits which wavelengths reach the surface. Understanding ultraviolet therefore requires distinguishing its wavelength bands, the radiation actually received by a material or organism, and the particular processes through which that radiation acts.
Spectral boundaries and photon energy
Ultraviolet radiation is commonly divided into UVA, spanning 315–400 nm; UVB, 280–315 nm; and UVC, 100–280 nm. These boundaries are widely used in international radiation and lighting terminology. Some biomedical literature instead places the UVA–UVB boundary at 320 nm, so numerical wavelength limits are more informative than a band name alone. Additional expressions—including near ultraviolet, deep ultraviolet, vacuum ultraviolet, and extreme ultraviolet—serve different purposes and do not form one universally consistent classification. Vacuum ultraviolet usually denotes wavelengths below approximately 200 nm, where absorption by air becomes particularly important; extreme ultraviolet often refers to approximately 10–121 nm.
The energy of a photon depends inversely on its wavelength:
where is the Planck constant, is the speed of light in vacuum, is frequency, and is vacuum wavelength. Expressed in electronvolts, the relation is approximately when wavelength is given in nanometres. Thus, photons at 400, 280, 100, and 10 nm carry approximately 3.10, 4.43, 12.4, and 124 eV, respectively. This substantial energy range explains why ultraviolet cannot be treated as a single kind of chemical or biological agent.
A photon can drive a process only if matter can absorb it through an allowed transition or another available interaction. The energy of a chemical bond alone does not establish whether a particular wavelength will break that bond: absorption probability, molecular structure, energy redistribution, and competing relaxation pathways also matter. UV absorption commonly promotes an electron into an excited state; the resulting energy may subsequently appear as emitted radiation, molecular motion, chemical transformation, or electron ejection.
Ultraviolet is often described broadly as non-ionizing radiation, especially in discussions of UVA, UVB, and conventional germicidal UVC. That description is not valid for its entire spectral range. The ionization energy of atomic hydrogen, for example, is approximately 13.6 eV, corresponding to 91.2 nm. Radiation shorter than that wavelength can photoionize ground-state hydrogen. Other substances have different thresholds, and some can be ionized at longer ultraviolet wavelengths. Similarly, the transition between extreme ultraviolet and soft X-rays is a naming convention rather than a discontinuity in electromagnetic behavior.
Discovery and artificial sources
Ultraviolet radiation was identified in 1801 by the German physicist Johann Wilhelm Ritter. Building on experiments that separated sunlight with a prism, Ritter placed light-sensitive silver chloride in and beyond the visible spectrum. He observed particularly strong darkening beyond the violet region. His experiment detected an invisible extension of the spectrum through its chemical action rather than through vision. William Herschel’s discovery of infrared radiation beyond the red end in 1800 provided an important contemporary precedent for investigating invisible radiation.
During the nineteenth century, photographic methods and improved optical materials extended access to ultraviolet wavelengths. Ordinary glass absorbs much of the shorter-wavelength UV, whereas quartz and certain other materials transmit farther into the ultraviolet. Victor Schumann’s late-nineteenth-century investigations of very short ultraviolet wavelengths required overcoming absorption by air, optical components, and photographic materials. Such work helped establish experimental techniques later associated with vacuum-ultraviolet spectroscopy. Ultraviolet observations also became part of the evidence used to understand atomic spectra, electronic structure, and quantum mechanics.
Artificial ultraviolet sources generate radiation through several different mechanisms. In a low-pressure mercury discharge, electrically excited mercury atoms emit strongly near 253.7 nm; another important line lies near 184.9 nm. Whether the shorter-wavelength line leaves a lamp depends on its envelope material. Medium-pressure mercury lamps produce a broader distribution of lines and continuum radiation. Deuterium lamps provide a comparatively continuous UV spectrum useful in analytical instruments, while xenon arcs and flashlamps supply broadband radiation extending through the ultraviolet and visible regions.
Lasers produce more spectrally concentrated ultraviolet radiation. Excimer and related gas lasers include krypton fluoride sources near 248 nm and argon fluoride sources near 193 nm. Solid-state lasers can also generate ultraviolet through nonlinear frequency conversion: a common example is the 355 nm third harmonic of a 1064 nm neodymium-based laser. Ultraviolet light-emitting diodes use wide-band-gap semiconductor materials, notably gallium nitride and aluminium gallium nitride alloys. Their emission wavelength depends on composition and device structure. Shorter-wavelength devices face particular challenges in carrier injection, material quality, light extraction, and efficiency.
Laboratory and industrial facilities also obtain ultraviolet from high-temperature plasmas, electron-beam excitation, and synchrotron radiation. These sources differ not merely in wavelength but in brightness, pulse duration, coherence, stability, and spectral bandwidth. A source suitable for fluorescence inspection may therefore be unsuitable for quantitative spectroscopy, lithography, or testing a biological action spectrum.
Interaction with matter and ultraviolet optics
The defining practical feature of ultraviolet radiation is its wavelength-dependent interaction with matter. In atoms, absorption occurs at discrete electronic transitions, broadened by physical conditions and interactions. In molecules, electronic transitions are accompanied by vibrational and rotational structure, often producing broad absorption bands. Aromatic compounds, conjugated organic molecules, and many inorganic ions have characteristic UV absorption. In solids, absorption can promote electrons between energy bands or involve defects and impurities. These mechanisms underpin ultraviolet identification methods and influence which materials can serve as windows, coatings, or detectors.
An absorbed photon does not necessarily cause a lasting chemical change. Excited matter may release energy by fluorescence, by slower phosphorescence, or through nonradiative pathways that ultimately increase molecular motion. Fluorescence generally occurs at a longer wavelength than the absorbed radiation because some energy is lost before emission. Alternatively, excitation may initiate bond cleavage, electron transfer, molecular rearrangement, or reactions involving oxygen. The fraction of absorbed photons producing a specified outcome is its quantum yield; that yield may depend on wavelength, temperature, solvent, and the presence of other substances.
Transmission through a uniform absorbing medium is often described by the Beer–Lambert relation,
where and are incident and transmitted intensities, is path length, and is the absorption coefficient. This expression assumes conditions in which absorption can be separated appropriately from other losses. In turbid liquids, tissues, or particulate atmospheres, scattering complicates the interpretation. Surface reflection also reduces transmission, while photochemical changes during exposure can alter the absorbing medium itself.
Ultraviolet optical systems require materials selected for the intended band. Common window glass transmits some longer-wavelength UVA but strongly attenuates shorter ultraviolet; its exact behavior depends on composition and thickness. UV-grade fused silica extends transmission into the deep ultraviolet, while calcium fluoride and magnesium fluoride serve in selected shorter-wavelength applications. At extreme-ultraviolet wavelengths, most materials absorb so strongly that conventional transmissive lenses are impractical. Optical systems instead use grazing-incidence mirrors or wavelength-selective multilayer coatings, often within vacuum.
Optical design must also account for contamination and radiation-induced change. Thin organic films that have little effect in visible light may severely reduce ultraviolet transmission or reflectivity. Prolonged exposure can create color centers, alter coatings, or degrade polymers and adhesives. Ultraviolet instruments therefore depend on material purity, controlled handling, appropriate calibration, and characterization of stray visible light as well as their nominal UV response.
Solar ultraviolet and atmospheric filtering
The Sun is the principal natural ultraviolet source affecting Earth’s surface. Its photosphere supplies much of the near-ultraviolet continuum, while hotter atmospheric layers contribute prominent ultraviolet lines and shorter-wavelength emission. Solar output varies with wavelength and with magnetic activity; extreme-ultraviolet emission generally varies more strongly over the solar cycle than visible output. Above Earth’s atmosphere, the solar UV spectrum contains many features arising from atomic absorption and emission rather than resembling a perfectly smooth thermal spectrum.
The atmosphere filters this radiation selectively. Molecular oxygen absorbs strongly at short wavelengths, while ozone is especially important across UVC and UVB. Solar UVC is effectively removed before reaching the ground, and most UVB is absorbed. Consequently, terrestrial solar ultraviolet consists predominantly of UVA, with a smaller but biologically important UVB component. Ground-level values depend on the solar spectrum, atmospheric composition, the Sun’s elevation, and local conditions; a single fixed percentage cannot describe all situations.
Ultraviolet also helps create the absorbing atmosphere. In the stratosphere, photons shorter than approximately 242 nm can dissociate molecular oxygen. The resulting oxygen atoms can combine with oxygen molecules in the presence of a third collision partner to form ozone. Ozone absorbs ultraviolet and can dissociate again, coupling photochemistry to atmospheric heating. This simplified oxygen–ozone chemistry was formalized by Sydney Chapman in 1930. Actual ozone abundance also depends on catalytic cycles involving nitrogen, hydrogen, chlorine, and bromine compounds. The discovery of severe Antarctic springtime ozone depletion in the 1980s demonstrated the importance of these additional processes.
At the surface, UV irradiance generally increases when the Sun is high because radiation traverses a shorter atmospheric path. Elevation, atmospheric ozone, aerosols, clouds, and surface reflectivity modify this relationship. Clouds often reduce UV, but broken-cloud conditions can produce short-lived enhancements through scattering. Snow can strongly increase reflected UV exposure, whereas different soils, vegetation, and water surfaces have distinct wavelength- and angle-dependent reflectances. Shade does not eliminate ultraviolet because diffuse skylight can arrive from much of the sky.
In the upper atmosphere, extreme ultraviolet supplies energy for dissociation and ionization, contributing to the ionosphere and thermosphere. Changes in this energy input affect atmospheric temperature, density, and satellite drag. Ultraviolet is therefore both a radiation field shaped by the atmosphere and a driver of atmospheric structure. Its surface biological effects and upper-atmospheric effects occur in different wavelength bands and cannot be inferred from one another without spectral information.
Biological action and human health
Ultraviolet affects organisms when biological molecules absorb its photons. DNA absorbs strongly near 260 nm, and UV exposure can produce cyclobutane pyrimidine dimers and other photoproducts between adjacent bases. These lesions distort DNA and can interfere with replication and transcription. If damage is not accurately repaired before it is copied, it can contribute to mutation. Organisms possess several repair pathways; nucleotide excision repair removes damaged stretches of DNA, while photolyase enzymes in many organisms use light energy to reverse particular lesions. Humans do not possess photolyase-mediated repair.
Biological effects are not confined to direct DNA absorption. UV can excite cellular molecules that subsequently generate reactive oxygen species, damaging lipids, proteins, and nucleic acids. UVA commonly acts substantially through such photosensitized pathways, although it can also produce DNA photoproducts. UVB is particularly effective at causing sunburn and direct DNA damage. These distinctions describe dominant mechanisms, not absolute separations: wavelength, dose, cell type, oxygen availability, and the identity of absorbing molecules all influence the outcome.
In human skin, ultraviolet exposure can cause erythema, pigment changes, and cumulative structural damage. Chronic exposure contributes to photoaging, involving changes in extracellular-matrix components such as collagen. Ultraviolet radiation from sunlight and artificial sources is an established cause of skin cancer, including basal-cell carcinoma, squamous-cell carcinoma, and melanoma. Melanin absorbs and redistributes radiation and provides partial protection, but pigmentation does not eliminate UV-induced damage. The eye is also sensitive: acute exposure can cause photokeratitis, while cumulative exposure contributes to certain cataracts and other ocular disorders.
UVB also initiates vitamin D production in skin by converting 7-dehydrocholesterol to previtamin D3, which subsequently undergoes thermal conversion to vitamin D3. This is a photochemical reaction with its own wavelength dependence, distinct from the action spectra for sunburn or DNA damage. Medical uses of ultraviolet likewise rely on controlled biological effects. Narrowband UVB near 311–313 nm is used in clinical phototherapy for selected skin conditions; PUVA combines a photosensitizing psoralen compound with UVA. These treatments involve specified equipment, dosing, indications, and supervision rather than simply reproducing uncontrolled solar exposure.
Other organisms exploit or resist ultraviolet in diverse ways. Many insects and birds detect near-UV wavelengths, making ultraviolet reflection relevant to flowers, plumage, mate recognition, and foraging. Plants produce UV-absorbing compounds and regulate protective responses, including signaling through the UVR8 photoreceptor. In aquatic ecosystems, water and dissolved organic matter determine penetration, so clear surface waters can expose plankton to biologically significant UV while strongly colored waters attenuate it rapidly.
Measurement, dose, and action spectra
Ultraviolet measurement must specify what is being measured. Irradiance is radiant power incident per unit area, expressed in watts per square metre. Spectral irradiance describes its distribution with wavelength, commonly in watts per square metre per nanometre. Radiant exposure is irradiance integrated over time:
with units of joules per square metre. The word “dose” is widely used, but may mean incident radiant exposure, absorbed energy, or a biologically weighted quantity depending on context. These are not interchangeable.
A radiometer measures radiation within a spectral band, whereas a spectroradiometer resolves its wavelength distribution. Detectors include photodiodes, photomultiplier tubes, and imaging sensors with suitable materials or coatings. Silicon responds beyond the UV into visible and near-infrared wavelengths, so filters and optical design are necessary when selective UV measurement is required. A weak unwanted response at longer wavelengths can cause substantial error when a detector observes sunlight or another source whose visible output greatly exceeds its short-wave ultraviolet output.
Different outcomes require different spectral weighting. An action spectrum expresses the relative effectiveness of wavelength in producing a defined response, such as erythema, microbial inactivation, or a photochemical transformation. A weighted irradiance is calculated as
where is spectral irradiance and is the specified weighting function. The weighting function must be identified because two equally energetic exposures can differ markedly in biological effectiveness. A meter calibrated for one lamp spectrum may also respond inaccurately to a substantially different spectrum.
The UV Index expresses solar ultraviolet in terms of its erythema-producing effectiveness. It equals the erythemally weighted irradiance in watts per square metre multiplied by 40; equivalently, one index unit represents 25 milliwatts per square metre of weighted irradiance. It is dimensionless and is not a measure of total ultraviolet energy. The index was introduced in Canada in 1992 and subsequently standardized internationally. Forecasts and measurements incorporate or represent atmospheric and solar conditions, rather than measuring air temperature.
Reliable UV metrology requires traceable calibration and assessment of measurement uncertainty. Important errors arise from spectral mismatch, wavelength inaccuracies, detector aging, stray light, imperfect cosine response to oblique radiation, and changing source output. In reactors or complex rooms, a single irradiance reading may not represent the exposure received throughout the space. Geometry, motion, shadowing, and exposure time must be considered separately from a lamp’s rated electrical power.
Spectroscopy, imaging, and astronomy
Ultraviolet spectroscopy investigates electronic structure and chemical composition through absorption, emission, or reflection. In ultraviolet–visible absorption spectroscopy, a sample is compared with a reference, and absorbance is commonly written
where is molar absorptivity, is concentration, and is optical path length. The proportional relationship holds under appropriate chemical and instrumental conditions. Deviations can arise from chemical equilibria, excessive concentration, scattering, stray light, or insufficient spectral resolution.
Nucleic acids are commonly measured near 260 nm, while many proteins absorb near 280 nm because of aromatic amino-acid residues, especially tryptophan and tyrosine. Absorbance ratios can help characterize samples, but do not by themselves establish purity or molecular identity. UV detectors are also widely coupled to chromatography, where they record compounds as they leave a separation column. Diode-array instruments collect multiple wavelengths and can reveal spectral differences between substances that elute at similar times.
Ultraviolet excitation combined with visible fluorescence enables sensitive detection and imaging. Applications include mineral identification, document examination, biological microscopy, and analysis of fluorescent labels. The observed signal depends not just on the amount of material but also on excitation intensity, quantum yield, quenching, and optical collection efficiency. Photobleaching and photochemical damage can change a sample during observation. UV fluorescence imaging and imaging of reflected ultraviolet are distinct techniques: the former detects newly emitted light, while the latter records ultraviolet returned from a surface.
In astronomy, ultraviolet observations reveal hot stars, accreting material, diffuse gas, and energetic events. Hydrogen’s Lyman-alpha line at approximately 121.6 nm is especially important, while spectral lines from carbon, nitrogen, oxygen, and other elements trace gas over different ionization states and temperatures. UV continuum radiation is widely used to study recent star formation, although interstellar dust absorbs and scatters it strongly. Determining intrinsic luminosity therefore requires accounting for extinction rather than interpreting faintness as an absence of hot stars.
Atmospheric absorption means that much ultraviolet astronomy requires rockets, satellites, or space telescopes. The International Ultraviolet Explorer operated from 1978 to 1996 and supplied extensive stellar and extragalactic spectra. The Hubble Space Telescope, launched in 1990, includes ultraviolet observational capabilities, while the Galaxy Evolution Explorer surveyed the sky in ultraviolet from 2003 to 2013. At extreme-ultraviolet wavelengths, absorption by interstellar gas further limits observations. Solar instruments exploit this same spectral region to image hot plasma in the corona, where highly ionized atoms produce strong emission lines.
Photochemistry and industrial processing
Ultraviolet drives photochemistry by populating electronic states that are inaccessible or weakly populated under ordinary thermal conditions. A photochemical reaction may therefore follow a different pathway from a reaction initiated by heating. Its rate depends on how many photons are absorbed, the quantum yield of the desired transformation, and competing reactions. Increasing lamp power does not necessarily increase useful conversion proportionally: oxygen inhibition, light attenuation, reactant depletion, and unwanted side reactions can intervene.
In UV curing, photoinitiators absorb radiation and generate reactive species that start polymerization or cross-linking. Free-radical curing is widely used with acrylate formulations, while cationic systems can cure certain epoxides and other monomers. Applications include printing inks, protective coatings, adhesives, dental materials, and additive manufacturing. Curing depth depends on formulation, wavelength, pigment loading, and geometry. Oxygen can inhibit some radical-curing reactions at exposed surfaces, and incomplete conversion can leave residual reactive components. The curing process therefore involves a formulated material and a controlled exposure, not ultraviolet alone.
Photolithography uses light to create patterns in a radiation-sensitive resist. In semiconductor fabrication, deep-ultraviolet systems employ krypton fluoride lasers at 248 nm or argon fluoride lasers at 193 nm. Achievable feature size depends on wavelength, numerical aperture, and process-dependent factors, often represented schematically by . Immersion optics and multiple-patterning techniques extend patterning capability beyond what wavelength alone would suggest. Extreme-ultraviolet lithography operates near 13.5 nm and requires reflective multilayer optics and a vacuum environment because gases and conventional lens materials absorb the radiation strongly.
Ultraviolet can also remove material or change surfaces. Excimer-laser ablation deposits energy in shallow layers and can break bonds or rapidly remove heated material, depending on the target and irradiation conditions. UV–ozone cleaning uses ultraviolet-driven oxygen chemistry to oxidize organic contamination. In photocatalysis, a semiconductor such as titanium dioxide absorbs sufficiently energetic photons, generating electrons and holes that can participate in surface oxidation and reduction. Efficiency depends on charge recombination, adsorption, catalyst structure, and the availability of reactants.
The same chemistry that makes UV useful can cause deterioration. Polymers may undergo chain scission, cross-linking, discoloration, or embrittlement; dyes can fade, and coatings can lose mechanical integrity. Accelerated weathering instruments expose materials to controlled radiation, temperature, and moisture, but correspondence with outdoor service requires attention to spectral differences and environmental cycles. UV absorbers, stabilizers, pigments, and protective coatings alter these processes, making ultraviolet durability a material-system property rather than a simple function of total exposure.
Microbial inactivation and environmental treatment
Ultraviolet disinfection reduces microbial infectivity or reproductive capacity by photochemically damaging essential components. Conventional germicidal systems commonly use low-pressure mercury emission near 254 nm, close to the strong absorption region of nucleic acids. The practical endpoint is usually inactivation, not physical removal of organisms from the treated medium. “Disinfection” also does not necessarily mean sterilization: the achieved reduction depends on the organism, wavelength, delivered exposure, and treatment conditions.
Microbial reductions are frequently reported logarithmically. A 1-log reduction corresponds to a tenfold decrease, or 90%; a 3-log reduction corresponds to a thousandfold decrease, or 99.9%. Under simplified conditions, survival may follow an approximately exponential relationship with fluence, but real populations can show shoulders or tails caused by repair, aggregation, shielding, and differences in susceptibility. Bacteria, viruses, spores, and protozoan stages do not share a single UV sensitivity. Some organisms can also repair particular damage after exposure, so biological testing conditions affect measured performance.
In drinking-water and wastewater treatment, UV reactors expose flowing water through engineered arrangements of lamps or LEDs. Delivered treatment depends on water transmittance, flow distribution, lamp output, fouling, and the trajectories of organisms through the irradiated field. Suspended particles can shield microorganisms, and dissolved substances can absorb photons before they reach their targets. Reactor validation therefore combines optical and hydraulic behavior with biological response rather than relying solely on nominal lamp power. Unlike a persistent chemical disinfectant, UV provides no continuing disinfectant residual after the water leaves the irradiation zone.
Air-treatment systems apply related principles to microorganisms carried in aerosols. Upper-room germicidal installations irradiate an elevated zone while air circulation transports particles through it; in-duct systems treat air moving through ventilation equipment. Surface treatment is more constrained by shadowing, roughness, and contamination that covers organisms. Laboratory experiments with directly exposed samples do not automatically establish performance throughout a furnished room or on irregular objects. Radiation distribution and residence time are integral parts of the treatment mechanism.
Far-UVC sources, particularly filtered krypton-chloride excimer lamps near 222 nm, have attracted research because these wavelengths are absorbed strongly by biological materials and penetrate differently from 254 nm radiation. Their effectiveness and exposure characteristics depend on the complete emission spectrum, including unwanted longer-wavelength components, as well as geometry and operating conditions. Short-wavelength sources can also generate ozone when they emit radiation absorbed by molecular oxygen. Environmental treatment sometimes deliberately combines UV with hydrogen peroxide or other reagents in advanced oxidation processes, producing reactive species that degrade selected contaminants. Such chemical treatment has different performance criteria from microbial inactivation, even when both occur in the same reactor.