Turgor pressure is the hydrostatic pressure within a cell relative to its surroundings, generated when water enters and the cell’s expansion is resisted by its enclosing structures. It is especially important in plants, fungi, and many bacteria, whose cell walls withstand the resulting mechanical load. In plants, turgor helps maintain the firmness of nonwoody tissues, supplies a driving force for cell enlargement, and powers movements such as the opening and closing of leaf pores. It arises from the interaction of water movement, dissolved substances, and the mechanical properties of cell walls.
Physical basis
The cell membrane is selectively permeable: water can move across it, while many dissolved substances cannot cross freely. If the conditions favor water entry by osmosis, the cell tends to increase in volume. The expanding cell contents push against the wall, which develops tensile stress and resists further expansion. This resistance allows internal hydrostatic pressure to rise.
In mature plant cells, a large central vacuole usually occupies much of the cell volume. Water and dissolved substances in the vacuole contribute strongly to the cell’s osmotic properties. Its surrounding membrane, the tonoplast, regulates exchange with the cytoplasm. Turgor is nevertheless a mechanical property of the whole cell, not a pressure produced by the vacuole independently of the cell wall.
The wall is not simply an impermeable container. Water can move through its porous structure, while the plasma membrane provides the principal selectively permeable boundary. The wall’s mechanical resistance prevents the unrestricted swelling that could otherwise rupture the membrane.
Turgor and osmotic pressure
Turgor pressure and osmotic pressure are related but distinct:
- Turgor pressure is an actual hydrostatic pressure difference.
- Osmotic pressure describes the pressure required to prevent net osmotic water entry across a selectively permeable membrane.
For an ideal dilute solution, osmotic pressure is approximately
where is the van ’t Hoff factor, is solute molar concentration, is the gas constant, and is absolute temperature. Biological fluids can depart from this ideal approximation.
At equilibrium, if the relevant solutes cannot cross the membrane, hydrostatic pressure can balance the osmotic pressure difference:
Thus, a high solute concentration does not by itself specify a cell’s turgor. Conditions outside the cell, membrane transport, and wall mechanics also matter.
Relationship to water potential
Plant water relations are commonly described using water potential, which expresses the tendency of water to move relative to a reference state. Water moves spontaneously from higher to lower water potential.
A general decomposition is
where is solute potential, is pressure potential, is gravitational potential, and represents interactions with surfaces or matrices. Solute potential is negative relative to pure water at the same temperature and pressure.
For a hydrated cell over a small height difference, gravitational and matric contributions are often neglected:
The intracellular pressure term is closely associated with turgor, provided the external pressure reference is specified consistently. At water equilibrium, the cell and its immediate surroundings have equal water potentials, even though their solute concentrations and pressures may differ.
Water potential and turgor are commonly expressed in megapascals, with . Many hydrated plant cells have turgor pressures of several tenths of a megapascal, although values vary widely among tissues, species, and environmental conditions.
Turgid, flaccid, and plasmolyzed cells
A cell is turgid when its contents exert appreciable positive pressure against the wall. A flaccid cell has little or no positive turgor. These terms describe mechanical states rather than fixed amounts of water.
If the external environment becomes sufficiently concentrated, water leaves the cell and turgor declines. Further water loss can cause plasmolysis, in which the living cell contents contract and the plasma membrane pulls away from portions of the wall.
At incipient plasmolysis—the beginning of this separation—turgor is often approximated as zero. This approximation is useful experimentally, but membrane–wall attachments, irregular cell geometry, and tissue constraints can complicate its interpretation.
The turgor loss point is the water status at which positive turgor is lost. It is related to, but not identical with, visible wilting. Tissue structure and mechanical support can delay or alter the appearance of wilting after individual cells lose turgor.
Functions in plants
Mechanical support
Turgor gives firmness to leaves, young stems, and other nonwoody organs. Their mechanical behavior depends jointly on internal pressure, wall stiffness, cell shape, and tissue organization. Loss of turgor commonly causes drooping or wilting.
This support differs from that provided by thickened walls containing lignin. Woody stems can retain substantial rigidity even when living cells lose turgor, whereas soft herbaceous tissues depend more directly on hydration.
Cell growth
Turgor supplies a driving force for irreversible cell enlargement, but pressure alone does not guarantee growth. The wall must also undergo controlled loosening and restructuring.
A simplified model of irreversible volume growth is
where is cell volume, is turgor pressure, is a wall-yield threshold, and is an effective wall extensibility. Below the threshold, this model predicts no irreversible expansion.
The model distinguishes the force driving expansion from the wall’s capacity to yield. It does not fully describe the directional mechanics of walls containing cellulose microfibrils or the biochemical processes that remodel them. Growing cells also require continued water supply and wall material production.
Stomatal regulation and movement
Stomata are pores in the plant epidermis bordered by guard cells. Changes in guard-cell solute content, including potassium ions, anions, and sugars, alter water potential and therefore water uptake and turgor. Guard-cell shape and wall architecture convert these pressure changes into changes in pore aperture.
Stomatal movements regulate the exchange of carbon dioxide needed for photosynthesis and the loss of water vapor. Pore opening depends on the mechanical interaction between guard cells and surrounding epidermal cells, not simply on guard-cell pressure alone.
Turgor changes also drive movements in specialized organs called pulvini, including daily leaf movements in some plants and the rapid folding of sensitive-plant leaves. These movements depend on coordinated solute and water redistribution.
Regulation and environmental responses
Cells regulate turgor through membrane transport, solute metabolism, and changes in hydraulic permeability. Aquaporins facilitate water movement across membranes, while transport proteins regulate the distribution of ions and other solutes.
During drought or salt exposure, some plants accumulate solutes through osmotic adjustment. This lowers cellular solute potential and can help retain positive turgor as external water potential falls. Regulated solute accumulation is distinct from the passive increase in solute concentration caused by water loss.
Maintaining turgor does not necessarily maintain normal growth. Water stress can also alter wall properties, metabolism, and developmental signaling. Conversely, transient changes in turgor are part of normal growth and environmental responses.
Turgor in other organisms
Turgor is not restricted to plants. Bacterial cell envelopes withstand pressure associated with intracellular solutes. During sudden dilution of the surrounding medium, mechanosensitive channels can release solutes and limit excessive swelling.
Fungal walls likewise resist turgor. Pressure contributes to the extension of fungal hyphae, although polarized growth also requires localized wall construction and remodeling. Some pathogenic fungi develop highly pressurized infection structures that help penetrate host surfaces.
Animal cells also experience osmotic water movement, but they lack rigid cell walls. Their volume regulation and mechanical stability depend instead on membrane transport, the cytoskeleton, and interactions with surrounding tissues. Plant-style turgor is therefore not their main means of structural support.
Measurement and interpretation
A cell pressure probe measures turgor directly by inserting a fine, fluid-filled microcapillary into a cell and balancing the cell’s pressure. The technique can resolve individual-cell behavior, but insertion may damage small or delicate cells.
Indirect approaches include:
- Incipient plasmolysis measurements, which estimate osmotic conditions when turgor approaches zero.
- Pressure–volume analysis, which relates tissue water potential to water content and can estimate osmotic properties, tissue elasticity, and the turgor loss point.
- Mechanical measurements, such as indentation, which infer pressure only through models that also account for wall properties and cell geometry.
A pressure chamber used on a leaf or shoot does not directly measure individual-cell turgor. Its balancing pressure is commonly interpreted in relation to tissue water status or xylem pressure under specified conditions. Inferring turgor requires additional information about osmotic potential and tissue equilibration.
Turgor measurements must therefore be interpreted at the appropriate scale: neighboring cells may differ in pressure, and the stiffness of an organ reflects both cellular pressure and the mechanical structure of its tissues.