A tie is a curved line in musical notation that connects successive notes of the same pitch, indicating that they are to be performed as one continuous sound. The first note is sounded, and the following tied note or notes continue it without a new attack. The total notated duration is the sum of the connected note values. Ties allow a sound to extend across a barline or to be written in a way that makes its rhythmic position clear.
Meaning and duration
A tie changes how written notes are grouped into sounding events: two tied notes represent one sustained event, not two separate attacks. For example:
- Two tied quarter notes have the combined duration of a half note.
- A quarter note tied to an eighth note has the combined duration of a dotted quarter note.
- A half note tied to a quarter note lasts for three quarter-note beats.
The connected notes need not have equal values. Three or more notes can form a chain, with a tie joining each adjacent pair. Only the first note in the chain is attacked.
Ties specify duration within the prevailing rhythmic framework. They do not independently indicate a change of tempo, loudness, or tone quality. A fermata, by contrast, indicates a prolongation whose precise length is determined by performance context rather than simply by adding written note values.
Uses in rhythmic notation
Crossing barlines
A principal use of the tie is to continue a sound across a barline. Because each measure normally contains the duration prescribed by its time signature, a sound that begins in one measure and continues into the next must be divided into separately written notes.
For example, in a measure of four quarter-note beats, a note beginning on the fourth beat and lasting two beats can be written as a quarter note tied to another quarter note on the first beat of the next measure. The barline divides the notation but does not interrupt the sound.
Showing beat structure
Ties also clarify the organization of meter within a measure. A duration that could be represented by a single note may instead be divided into tied values so that important beat boundaries remain visible. The preferred spelling depends on the meter, rhythmic context, and engraving convention.
This is especially useful in syncopation, where a sound begins on a weak beat or subdivision and continues across a stronger beat without a fresh attack. Ties preserve the distinction between the underlying metrical structure and the rhythm actually sounded.
They also permit durations that cannot conveniently be represented by a single ordinary note value, including dotted values.
Appearance and placement
A tie usually appears as a short curved line placed close to the noteheads, above or below the notes. Its direction depends on stem direction, surrounding notation, and the need to avoid collisions. At a line or page break, the tie is divided visually into continuation segments; its musical meaning remains unchanged.
In a chord, ties apply to individual pitches. Some notes of a chord may be sustained while others are newly sounded, released, or replaced. Consequently, a single chord change may contain several separate ties rather than one curve spanning the whole group.
An accidental on the first note normally remains effective for the continuation of that same tied pitch across a barline, even if the accidental is not repeated. Once the tied sound ends, subsequent notes follow the applicable accidental and key-signature conventions.
Distinction from a slur
A tie resembles a slur, but the two signs have different functions:
| Feature | Tie | Slur |
|---|---|---|
| Notes connected | Successive notes of the same pitch | Two or more notes, often of different pitches |
| Main meaning | Combine durations into one sustained sound | Indicate connected articulation or grouping |
| New attacks | No new attack on tied continuations | Notes remain distinct, with execution depending on the instrument and context |
| Typical placement | Close to the connected noteheads | Often spans a larger group of notes |
Shape alone is not always sufficient to distinguish them: slurs can also occur over repeated pitches. Musical context, placement, and the intended articulation determine the reading.
Performance
The essential instruction is continuity without rearticulation at the tied boundary. On a piano, a tied key is normally held rather than struck again. Wind players and singers sustain the sound without a new tongued or syllabic attack. Bowed-string players likewise maintain continuity, although the physical means of sustaining it may depend on bowing and phrase length.
A tie does not guarantee a physically constant sound. Piano and plucked-string tones naturally decay even when their notated duration continues. The tie specifies the absence of a new attack and the intended duration, not an unchanging acoustic envelope.