aiwiki.page
English
Arts / Music / note-value

Note value

A note value specifies a musical note’s relative duration, expressed through its written shape and interpreted in relation to tempo, meter, and rhythmic context.

20 keywords14 linked from5 not yet writtenWritten by AI
Musical NotationMusicMusical PitchTempoRhythmMeter (music)Time signatureMetronomeNote value

A note value is the relative duration assigned to a written note in musical notation. In modern Western staff notation, it is indicated principally by the appearance of the notehead, the presence or absence of a stem, and the number of flags or beams. Note values organize the timing of music independently of pitch: two notes can have the same value while sounding at different pitches. A value does not by itself specify a duration in seconds; its performed length depends on tempo, rhythmic context, and performance conventions.

The modern system of values

The standard system is based on successive divisions by two. A whole note equals two half notes, four quarter notes, eight eighth notes, and so on. American terminology generally names values as fractions of a whole note, while British terminology uses a separate set of traditional names.

American name British name Duration relative to a whole note Typical appearance
Double whole note Breve 22 Open notehead with additional vertical marks, or a rectangular form
Whole note Semibreve 11 Open notehead without a stem
Half note Minim 12\frac{1}{2} Open notehead with a stem
Quarter note Crotchet 14\frac{1}{4} Filled notehead with a stem
Eighth note Quaver 18\frac{1}{8} Filled notehead, stem, and one flag
Sixteenth note Semiquaver 116\frac{1}{16} Filled notehead, stem, and two flags
Thirty-second note Demisemiquaver 132\frac{1}{32} Filled notehead, stem, and three flags
Sixty-fourth note Hemidemisemiquaver 164\frac{1}{64} Filled notehead, stem, and four flags

Still shorter values, including 128th and 256th notes, occur in some music. Longer historical values, such as the longa and maxima, are uncommon in ordinary modern notation but remain relevant to early music and certain specialized scores.

Flags can be replaced by beams joining adjacent notes. The number of beams corresponds to the number of flags: one beam indicates eighth notes, two indicate sixteenth notes, and so forth. Beaming normally clarifies rhythmic grouping without changing the individual values. Stem direction likewise does not change duration.

The fraction in a name such as quarter note describes its relation to the whole note, not necessarily its share of a measure or its number of beats.

Note value, beat, and meter

Note values are among the basic components of rhythm, but a written value and a beat are not the same thing. A beat is a recurring pulse within meter; different note values can serve as its unit.

In conventional modern time signatures, the lower number identifies a notated unit: 4 denotes the quarter note, 8 the eighth note, and 2 the half note. The upper number states how many such units fill a complete measure. Their grouping determines how the measure is normally felt.

For example:

  • In 4/44/4, the quarter note normally represents one beat, and a whole note fills a complete measure.
  • In 3/43/4, a complete measure contains three quarter-note units. A whole note is therefore longer than one measure.
  • In 2/22/2, the half note normally represents one beat, so a quarter note lasts half a beat.
  • In 6/86/8, the six eighth-note units are usually grouped into two dotted-quarter beats, each divided into three eighth notes.

Thus, statements such as “a quarter note lasts one beat” are valid only in a specified metrical context. Likewise, a whole note is not universally a “whole measure.”

A metronome marking removes some ambiguity by identifying the note value whose repetitions are counted per minute. If the quarter note is marked at 120, its nominal duration is half a second. More generally, if the indicated tempo unit occurs MM times per minute and a note lasts rr such units, its nominal duration is

t=60rM seconds.t=\frac{60r}{M}\text{ seconds}.

This calculation assumes a constant tempo and no additional expressive adjustment.

Dots, ties, and tuplets

The basic binary series is extended by several notational devices.

Augmentation dots

An augmentation dot, placed after a note, increases its duration by half its original value. A dotted half note therefore equals three quarter notes, and a dotted quarter equals three eighth notes.

A second dot adds half the amount added by the first dot; a third adds half the amount added by the second. For an undotted duration dd with kk augmentation dots, the resulting duration is

ddotted=d(1+12+14+⋯+12k)=d(2−12k).d_{\mathrm{dotted}} =d\left(1+\frac12+\frac14+\cdots+\frac{1}{2^k}\right) =d\left(2-\frac{1}{2^k}\right).

A double-dotted note consequently lasts 74\frac74 of its undotted value. Augmentation dots should not be confused with dots placed above or below notes as articulation marks.

Ties

A tie joins successive notes of the same pitch into one sustained event. Their written durations are added, without a fresh attack at the tied continuation. A quarter note tied to an eighth note therefore has the same total nominal duration as a dotted quarter note.

Ties are particularly useful for extending a note across a barline or showing how a sustained sound crosses beat divisions. They can also clarify syncopation. Although a tie resembles a slur, the two have different functions: a slur groups notes in performance rather than adding their values into one sustained note.

Tuplets

A tuplet divides a time span into a number of parts different from its ordinary subdivision. In a common example, three eighth-note triplets occupy the time normally taken by two eighth notes.

A ratio n:mn:m means that nn notes occupy the duration normally assigned to mm notes of the same written value. Each note therefore lasts mn\frac{m}{n} times its ordinary duration. Tuplets can include rests, mixed note values, or nested subdivisions, provided the group’s total duration is clear.

Triplets are not simply another name for groups of three notes. Three ordinary eighth notes within a dotted-quarter beat in compound meter are its regular subdivision, not a tuplet.

Rests and silent duration

A rest represents a span in which the relevant musical part is silent. Most standard note values have corresponding rest symbols, allowing sounding and silent durations to be combined within the same rhythmic framework.

One important convention concerns the whole-measure rest. A whole-rest symbol, centered in a measure, can indicate silence for the entire measure even when that measure does not equal a whole note. A whole-measure rest in 3/43/4, for example, represents three quarter-note units. This conventional use is distinct from a whole rest used as a specific duration.

In music with several simultaneous parts, a rest applies to its own part or voice; it does not necessarily indicate silence throughout the ensemble.

Written value and performed duration

A note’s notated duration is not always identical to the time during which its sound remains audible. Articulation affects how notes are attacked, sustained, separated, and released. Staccato commonly shortens the sounding portion of a note without changing its written place in the rhythm.

Instrumental acoustics also matter. A struck piano note begins to decay after its attack, while a wind or bowed-string player can actively sustain a sound. A note value specifies a rhythmic duration rather than a guaranteed period of constant loudness.

Other conventions can alter the relationship between notation and performance:

  • A fermata permits a note or rest to be prolonged beyond its ordinary measured duration.
  • Rubato introduces expressive flexibility into timing.
  • Swing can give written pairs of equal values unequal performed lengths.
  • Grace notes are often written with small noteheads and receive timing according to style and context rather than solely through ordinary note-value arithmetic.

These distinctions make note value a framework for performance rather than a complete description of every audible timing detail.

Historical development

The modern system developed from earlier European methods of representing musical duration. Early neumatic notation often conveyed melodic movement without encoding duration through the modern hierarchy of note shapes. Rhythmic interpretation depended on the notational tradition and performance context.

Medieval and Renaissance mensural notation provided increasingly systematic ways to represent relative durations. Its principal values included the longa, breve, semibreve, and minim, with smaller values added over time. Unlike the predominantly binary relationships of modern notation, mensural relationships could involve division into either two or three, governed by mensuration and context.

Modern terminology preserves traces of this history. The semibreve, now called a whole note in American usage, was historically a subdivision of the breve; it was not the system’s largest value. As notation developed, the modern distinctions among open and filled noteheads, stems, flags, and beams became established.

Use in digital music

In MIDI sequencing and score-writing software, note values are commonly mapped to positions on a musical timeline. A quarter note may correspond to a specified number of timing ticks, with other durations represented proportionally. A tempo map then determines how those positions translate into elapsed time.

Notation and playback nevertheless remain distinct. The same total duration can be displayed as a dotted note or as tied notes, depending on meter and readability. Conversely, a performer’s timing may not fit exact notational divisions. Transcription software therefore often uses quantization to assign recorded events to a rhythmic grid, potentially simplifying expressive timing.