Thermal diffusivity is a material property that describes how rapidly a temperature disturbance spreads by conduction. It is the ratio of thermal conductivity to volumetric heat capacity, combining a material’s ability to conduct heat with its capacity to store thermal energy. A high thermal diffusivity generally means that internal temperature differences diminish quickly; a low value means that they persist longer. Its symbol is usually , although and are also used.
Definition and units
For a homogeneous, isotropic material, thermal diffusivity is defined as
where:
- is thermal conductivity, in watts per metre-kelvin;
- is mass density, in kilograms per cubic metre;
- is specific heat capacity at constant pressure, in joules per kilogram-kelvin.
The product is the volumetric heat capacity, in joules per cubic metre-kelvin. In the International System of Units, thermal diffusivity is expressed in square metres per second:
Square millimetres per second are also common in materials testing, with .
The use of is standard in many engineering conduction problems. More generally, the heat-storage term must correspond to the thermodynamic constraints and constitutive assumptions of the model. Compressible fluids and coupled thermoelastic problems can require additional terms rather than a simple substitution of one heat capacity for another.
Role in the heat equation
Thermal diffusivity appears naturally when conservation of energy is combined with Fourier’s law of heat conduction. Fourier’s law states that the conductive heat-flux vector is
where is the temperature gradient. The negative sign indicates that conductive heat flow is toward lower temperature.
For a stationary material with constant properties and a volumetric heat-generation rate , the heat equation is
Dividing by volumetric heat capacity gives
Without internal heat generation,
This has the same mathematical form as other diffusion equations. Temperature differences are smoothed as thermal energy is redistributed, although thermal diffusion need not involve a net movement of matter.
If properties vary with position or temperature, the more general conduction term is . It cannot generally be replaced by . Thermal diffusivity may then be a local, state-dependent quantity rather than a single constant.
Characteristic time and distance
For a characteristic distance , the conductive diffusion time scales as
Conversely, the distance over which a thermal disturbance spreads in time scales as
These are scaling relations, not universal formulas for complete equilibration. Numerical factors depend on geometry, boundary conditions, and the chosen measure of response.
The square dependence on distance is important: doubling the thickness of an otherwise comparable object increases its internal diffusion timescale by approximately a factor of four.
The corresponding dimensionless measure is the Fourier number,
It expresses elapsed time relative to the internal conductive diffusion timescale. The overall heating or cooling rate may nevertheless be controlled by heat exchange at the surface.
Distinction from related properties
Thermal conductivity
Thermal conductivity determines the heat flux produced by a specified temperature gradient. Thermal diffusivity determines how quickly a temperature field changes as heat flows and is stored.
Consequently, a material can have a relatively high diffusivity because its volumetric heat capacity is small, even if its conductivity is only modest. A gas, for example, can have a greater thermal diffusivity than a liquid while conducting far less heat under the same temperature gradient.
Diffusivity does not determine a steady-state temperature field by itself. For constant-property, source-free conduction, it drops out of the steady heat equation, while conductivity remains relevant to heat flux and interface conditions.
Thermal effusivity
Thermal effusivity is defined as
It characterizes a material’s ability to exchange heat with its surroundings during transient contact. Diffusivity concerns the spreading of temperature changes within a material; effusivity is especially useful in describing contact temperatures and surface thermal response.
For ideal contact between initially uniform, semi-infinite bodies, their effusivities determine the initial interface temperature. This is one reason materials at the same temperature can feel different to the touch; thermal conductivity alone does not fully describe the contact process.
Values and material dependence
Approximate room-temperature values illustrate the range encountered in common materials:
| Material | Approximate thermal diffusivity, |
|---|---|
| Copper | |
| Aluminium | |
| Air at about atmospheric pressure | |
| Common stainless steels | |
| Many rocks and glasses | to |
| Liquid water |
These are illustrative values, not reference specifications. Composition, temperature, pressure, porosity, moisture content, and processing history can change the result.
In metals, mobile electrons often carry a substantial fraction of the heat. In electrically insulating crystals, heat transport is commonly dominated by phonons. Defects, grain boundaries, and other scattering mechanisms affect conductivity and therefore diffusivity.
In porous materials, the solid framework, pore fluid, and pore geometry all contribute to the effective value. Changes in moisture content can alter both heat conduction and heat storage.
Anisotropy
In directionally structured materials, such as layered crystals and fibre composites, thermal conductivity is a tensor rather than a scalar. If volumetric heat capacity is scalar, a thermal-diffusivity tensor can be written as
A thermal disturbance may then spread much faster in one direction than another. Graphite is a prominent example of strongly direction-dependent thermal transport.
Measurement
Thermal diffusivity is commonly measured through a transient experiment: a controlled heat input is applied, and the resulting temperature change is recorded over time.
Flash method
In the flash method, a short energy pulse heats the front face of a thin specimen, while the temperature rise at the rear face is measured.
For an ideal homogeneous slab of thickness , with an instantaneous, uniformly absorbed surface pulse and negligible heat loss, the diffusivity is
where is the time required for the rear-face temperature rise to reach half its final value.
Practical analysis may require corrections for finite pulse duration, heat loss, nonuniform heating, optical transmission, and multilayer structure. Specimen thickness is particularly important because it enters the expression quadratically.
Other methods
Periodic heating methods infer diffusivity from the attenuation and phase delay of temperature oscillations. For one-dimensional conduction into a homogeneous semi-infinite material, the thermal penetration depth is
where is the angular frequency of the heating.
Transient contact methods and photothermal techniques can also estimate diffusivity, often together with other thermal properties. Some experiments determine only combinations of properties unless independent information is supplied.
Reliable results require appropriate calibration, a suitable heat-transfer model, and evaluation of measurement uncertainty. Contact resistance, specimen dimensions, surface coatings, and unintended heat losses can all affect the inferred value.
Applications and limitations
Thermal diffusivity is central to transient thermal modelling in manufacturing, electronics, building materials, and geology. It helps describe temperature gradients during welding and heat treatment, the response of components to short heating pulses, and the penetration of daily or seasonal temperature variations into the ground.
For fluids, molecular thermal diffusion competes with transport by bulk motion. The Prandtl number,
compares momentum diffusivity, or kinematic viscosity , with thermal diffusivity. In turbulent flow, an effective turbulent thermal diffusivity may represent mixing, but it is a model-dependent transport coefficient rather than an intrinsic molecular property.
A single constant diffusivity has several important limitations:
- Near a phase transition, latent heat and changing properties can make a constant-property heat equation inadequate.
- In heterogeneous materials, an effective diffusivity depends on the scale and direction of observation.
- In moving fluids, bulk transport must be included explicitly unless it is negligible.
- At very short times or very small length scales, ballistic or nonequilibrium transport can invalidate ordinary Fourier diffusion.
The classical heat equation also predicts an arbitrarily small temperature response at every distance immediately after a disturbance. This is a mathematical property of the diffusion approximation, not a literal description of heat propagating instantaneously through matter.