The Prandtl number, symbol , is a dimensionless quantity that compares the rate at which momentum diffuses through a fluid with the rate at which heat diffuses through it. It is defined as the ratio of kinematic viscosity to thermal diffusivity. Named after the German physicist Ludwig Prandtl, it is a central parameter in convective heat transfer, where it helps describe how velocity and temperature fields develop relative to one another.
Definition
The Prandtl number is
where:
- is the kinematic viscosity;
- is the thermal diffusivity;
- is the dynamic viscosity;
- is the fluid density;
- is the specific heat capacity at constant pressure;
- is the thermal conductivity.
Both and have units of square metres per second, so their ratio is dimensionless. Equivalently, and have the same units.
For a fluid of specified composition and thermodynamic state, the molecular Prandtl number is a material property: it does not directly depend on flow speed, pipe diameter, or other geometric dimensions. It generally varies with temperature and can also vary with pressure, particularly where material properties change strongly.
Physical interpretation
Viscosity redistributes momentum by molecular transport, while thermal diffusivity characterizes the spreading of thermal disturbances by conduction. The Prandtl number compares these two transport processes:
- : heat diffuses much more rapidly than momentum.
- : thermal and momentum diffusion occur at comparable rates.
- : momentum diffuses much more rapidly than heat.
This interpretation concerns diffusion, not the overall rate of heat transport in a moving fluid. Bulk fluid motion may carry heat much faster than conduction alone.
A timescale argument gives the same interpretation. Across a characteristic distance , the momentum-diffusion and thermal-diffusion times are approximately
Thus,
A large Prandtl number therefore means that thermal diffusion takes longer than momentum diffusion over the same distance.
Role in the governing equations
The Prandtl number appears naturally when fluid-flow and thermal-energy equations are expressed in dimensionless form. For an incompressible Newtonian fluid with constant properties, neglecting internal heat generation and viscous dissipation, the temperature equation is
Using a characteristic speed and length , the dimensionless temperature equation becomes
where is dimensionless temperature and the Reynolds number is
The corresponding viscous term in the dimensionless momentum equation has coefficient . The Prandtl number therefore controls the relative importance of thermal diffusion and viscous momentum diffusion.
The product
is the thermal Péclet number, which compares heat transport by bulk motion with heat transport by conduction. A fluid’s Prandtl number alone does not determine whether advection or conduction dominates; flow speed and length scale also matter.
Velocity and thermal boundary layers
An important application is the comparison of velocity and thermal boundary layers near a surface. The velocity boundary layer is the region where viscous effects produce substantial changes in velocity. The thermal boundary layer is the region where temperature differs appreciably from its value in the surrounding fluid.
For laminar flow over a heated flat plate:
- At high Prandtl number, the thermal boundary layer is generally thinner than the velocity boundary layer.
- At low Prandtl number, the thermal boundary layer is generally thicker.
- Near unit Prandtl number, their thicknesses are of comparable order.
For an important range of laminar flat-plate conditions, boundary-layer analysis gives the approximate scaling
where and are characteristic thermal and velocity boundary-layer thicknesses. This is not a universal formula: it depends on the flow configuration and applicable Prandtl-number range, and different limiting regimes give different scalings.
For constant properties, negligible dissipation, matching boundary conditions, and a uniform wall temperature, the flat-plate velocity and temperature boundary-layer equations have analogous forms at .
Typical values
Representative approximate values illustrate the large differences among fluids:
| Fluid and approximate condition | Prandtl number |
|---|---|
| Liquid metals, depending on metal and temperature | Commonly – |
| Air near room temperature and atmospheric pressure | About |
| [[water | Water]] near and atmospheric pressure |
| Many oils near room temperature | Tens to thousands |
Liquid metals have low Prandtl numbers because their high thermal conductivity allows heat to spread rapidly relative to momentum. Oils commonly have high values because their viscosity is large relative to their thermal diffusivity.
These values are illustrative rather than universal constants. Water’s Prandtl number decreases substantially as its temperature rises over ordinary liquid-water conditions, while oil values depend strongly on composition and temperature.
Engineering and scientific applications
The Prandtl number enters many correlations for the Nusselt number,
where is a convective heat-transfer coefficient. In forced convection, such correlations commonly have the structure
In natural convection, the Prandtl number appears alongside buoyancy parameters. In particular, the Rayleigh number satisfies
where is the Grashof number, comparing buoyancy and viscous effects.
Applications include heat exchangers, liquid-metal cooling systems, lubrication flows, atmospheric and oceanic convection, and computational fluid dynamics. High-Prandtl-number flows can have very thin thermal layers that require fine numerical resolution. Low-Prandtl-number flows can have temperature disturbances extending well beyond regions of strong velocity gradients.
Turbulent Prandtl number
In turbulent flow, fluctuating eddies transport momentum and heat in addition to molecular transport. The turbulent Prandtl number is commonly defined in eddy-diffusivity models as
where is an eddy viscosity and is an eddy thermal diffusivity.
Unlike the molecular Prandtl number, is not solely a material property. It depends on the flow and on how turbulent transport is represented. Engineering models often assign it a value of order unity, but a single constant does not describe all near-wall, buoyant, or strongly nonuniform flows.
Limitations and related quantities
A single Prandtl number can be inadequate when fluid properties vary substantially across a flow. Heat-transfer correlations therefore specify where properties are to be evaluated, such as at a bulk or film temperature. Non-Newtonian fluids, strongly compressible flows, and flows with substantial viscous heating require additional parameters or modified formulations.
The Prandtl number also has analogues in mass transfer. The Schmidt number, , compares momentum diffusivity with molecular mass diffusivity . The Lewis number, , compares thermal and mass diffusivities, giving
These relationships support analogies among momentum, heat, and species transport, although such analogies depend on the governing equations and boundary conditions rather than on dimensional ratios alone.