The tesla (symbol T) is the coherent derived unit of magnetic flux density in the International System of Units (SI). Magnetic flux density, conventionally denoted by , describes the magnetic field that enters the force law for moving electric charges. One tesla equals one weber per square metre, or one newton per ampere-metre. The unit is named after the inventor and electrical engineer Nikola Tesla.
Definition and equivalent units
The tesla can be expressed through magnetic flux:
where Wb is the symbol for the weber. For a uniform magnetic field perpendicular to a flat surface, the magnetic flux through the surface is
Thus, a uniform field of one tesla passing perpendicularly through an area of one square metre produces a magnetic flux of one weber. More generally,
The tesla also has the equivalent expressions
Here N, A, V, m, s, and kg denote the newton, ampere, volt, metre, second, and kilogram, respectively. Its dimensions are therefore
with , , and representing mass, time, and electric current.
“Coherent” means that these relations require no additional numerical conversion factor when all quantities are expressed in coherent SI units.
Physical interpretation
Force on moving charges and currents
The magnetic part of the Lorentz force on a particle is
where is its electric charge and its velocity. For motion perpendicular to the field, the force magnitude is . For other orientations, it also depends on the angle between the velocity and the field.
For a straight wire carrying electric current in a uniform external field,
where points along the current and has magnitude equal to the wire’s length within the field. A one-metre segment carrying one ampere perpendicular to a one-tesla field therefore experiences a magnetic force of one newton.
Magnetic flux density versus magnetic field strength
In everyday scientific usage, “magnetic field” often means , measured in teslas. In a more specific distinction, magnetic field strength denotes , measured in amperes per metre. These are related but different quantities.
In SI, their relationship is
where is magnetization and is the magnetic constant, or vacuum permeability. In vacuum, this reduces to . In a linear, isotropic material, it is commonly written .
For materials exhibiting ferromagnetism, the relationship may be nonlinear and dependent on the material’s magnetic history. A value in teslas therefore cannot generally be converted to amperes per metre without information about the medium.
Multiples, submultiples, and conversion
Common SI submultiples include:
| Unit | Symbol | Value in teslas |
|---|---|---|
| Millitesla | mT | |
| Microtesla | ||
| Nanotesla | nT |
The gauss (G), a unit of magnetic flux density in Gaussian cgs usage, is related to the tesla by the exact conversion
Consequently, one gauss equals . Although this conversion is straightforward, electromagnetic equations in SI and Gaussian systems differ in form; converting an entire equation requires more than replacing its field units.
Typical magnitudes and applications
Near Earth’s surface, the main geomagnetic field is approximately –, depending on location. Geophysical measurements often use nanoteslas to describe small variations in that field.
Many clinical magnetic resonance imaging scanners operate with nominal static fields of or . Stronger fields are used in specialized imaging and research. In nuclear magnetic resonance, the applied field helps determine nuclear resonance frequencies.
Teslas also specify fields in electric machines, magnetic materials research, and particle accelerators. High-field laboratory magnets can generate fields of tens of teslas, while specialized pulsed systems can reach higher values. Such figures require context: a brief pulsed field is not equivalent operationally to a continuously maintained field of the same magnitude.
A field rating alone does not fully characterize a magnet. Spatial uniformity, field gradients, available volume, and time variation may also be important. A field gradient is expressed in units such as teslas per metre, whereas a rate of change is expressed in teslas per second.
Measurement
Magnetic flux density can be measured with Hall-effect probes, induction coils, and magnetic-resonance instruments. Their suitability depends on field magnitude, frequency, spatial resolution, and the required measurement uncertainty.
Induction coils respond to changing magnetic flux through Faraday’s law of induction. Measuring a static field by this method requires a change in the coil’s position, orientation, or linked flux. Reliable measurements also depend on calibration and on identifying which field component or magnitude an instrument reports.
History and notation
The name tesla was adopted in 1960 by the 11th General Conference on Weights and Measures, at the meeting that established the SI.
Following SI conventions, the unit name is written in lowercase except at the beginning of a sentence, while its symbol is the uppercase upright letter T. A space separates the numerical value from the symbol: , not “3T.” Unit symbols do not take plural endings; “three teslas” is written .