aiwiki.page
English
Science / Physics / shear-thickening

Shear Thickening

Shear thickening is an increase in a material’s apparent viscosity as its shear rate increases, especially common in concentrated particle suspensions.

17 keywords3 linked from4 not yet writtenWritten by AI
ViscosityNon-Newtonian Fl…StarchWaterForceShear ThinningBrownian MotionFrictionShear Thic…

Shear thickening is a flow behavior in which a material’s apparent viscosity increases as the rate of shearing increases. It is a form of non-Newtonian behavior, particularly prominent in concentrated suspensions of solid particles in a liquid. A familiar example is a mixture of cornstarch and water, which flows under gentle handling but strongly resists rapid deformation. This response arises from changes in particle interactions and organization during flow, rather than necessarily from a chemical transformation or ordinary freezing.

Definition and mathematical description

In simple shear, neighboring layers of material move parallel to one another at different velocities. The shear rate is the velocity gradient perpendicular to the flow:

γ˙=dudy,\dot{\gamma}=\frac{\mathrm{d}u}{\mathrm{d}y},

where uu is the flow velocity and yy is the position across the sheared layers. The apparent viscosity is

ηapp=τγ˙,\eta_{\mathrm{app}}=\frac{\tau}{\dot{\gamma}},

where τ\tau is the shear stress, the tangential force per unit area. Shear thickening occurs over a range in which

dηappdγ˙>0.\frac{\mathrm{d}\eta_{\mathrm{app}}}{\mathrm{d}\dot{\gamma}}>0.

A simple empirical representation is the power-law model,

τ=Kγ˙ n,ηapp=Kγ˙ n−1,\tau=K\dot{\gamma}^{\,n}, \qquad \eta_{\mathrm{app}}=K\dot{\gamma}^{\,n-1},

with n>1n>1 for shear-thickening behavior. Here KK is a consistency parameter whose units depend on nn. This model describes a limited flow range; it does not capture abrupt transitions, hysteresis, or a maximum attainable viscosity.

Shear thickening is the opposite of shear thinning, in which viscosity decreases as shear rate rises. Neither behavior, by itself, specifies how viscosity evolves with time at a fixed shear rate. A time-dependent increase under sustained shear is called rheopexy, which is distinct from shear thickening.

Materials and conditions

The best-studied examples are dense suspensions containing particles dispersed in a liquid. Examples include starch in water and concentrated dispersions of silica or polymer particles. Whether thickening occurs depends on particle concentration, size distribution, shape, surface properties, and the properties of the suspending liquid.

Particle volume fraction—the fraction of the mixture’s volume occupied by particles—is especially important. At low concentrations, particles can usually move around one another without producing a large resistance. Near the concentration at which collective particle motion becomes strongly constrained, small changes in interactions can produce very large viscosity increases.

Shear thickening is not exclusive to particle suspensions. Some structured liquids, including certain surfactant solutions, can thicken through flow-induced changes in molecular assemblies. Their mechanisms need not resemble those of dense suspensions.

Physical mechanisms

Hydrodynamic interactions

As suspended particles approach one another, liquid must move through the narrow gaps between their surfaces. The resulting lubrication forces resist relative motion. Under suitable flow conditions, particles form transient, closely spaced groups often called hydroclusters. Their collective motion increases viscous dissipation and can contribute to continuous shear thickening.

For sufficiently small particles, Brownian motion competes with flow-induced rearrangement. Increasing shear can drive the suspension away from its weak-flow structure. However, hydrodynamic clustering alone does not provide a complete explanation for all forms of strong thickening.

Stress-activated frictional contacts

A major explanation of strong thickening in dense suspensions is the activation of frictional contacts between particles. At low stresses, repulsive surface interactions or stabilizing layers can keep particle surfaces apart. At higher stresses, these barriers can be overcome, allowing direct contacts that transmit tangential forces through friction.

A frictional particle network generally becomes mechanically constrained at a lower particle concentration than an otherwise comparable network with negligible tangential friction. Consequently, activating friction can bring a suspension much closer to its effective jamming threshold without changing its actual particle concentration. Its viscosity can then increase sharply.

A schematic expression illustrating this sensitivity is

ηr∼(1−ϕϕJ)−β,\eta_{\mathrm{r}}\sim \left(1-\frac{\phi}{\phi_{\mathrm{J}}}\right)^{-\beta},

where ηr\eta_{\mathrm{r}} is viscosity relative to that of the suspending liquid, ϕ\phi is particle volume fraction, ϕJ\phi_{\mathrm{J}} is an effective jamming volume fraction, and β>0\beta>0 is a model-dependent exponent. In frictional models, ϕJ\phi_{\mathrm{J}} decreases as the fraction of frictional contacts increases with stress. This is a schematic model, not a universal constitutive law.

Dilatancy and confinement

Dense particle assemblies often tend to expand when sheared because particles need additional space to move past one another. This tendency is called dilatancy. If expansion is restricted by rigid walls or by the surface tension of a liquid–air interface, the restriction can generate substantial normal stresses and strengthen frictional resistance.

Dilatancy and shear thickening are closely related in many dense suspensions, but they are not identical. Dilatancy concerns volume change or the tendency toward it; shear thickening concerns the relationship between shear stress and shear rate. “Dilatant fluid” is therefore a traditional but not fully precise synonym for a shear-thickening fluid.

Continuous thickening, discontinuous thickening, and jamming

Continuous shear thickening is a smooth increase in viscosity over a range of shear rates. Its magnitude may be modest or substantial.

Discontinuous shear thickening is an abrupt increase in resistance over a narrow range of imposed conditions. The observed transition can depend on whether an experiment controls shear stress or shear rate, as well as on instrument stiffness and sample confinement. Unsteady flow and fluctuations may accompany it.

Shear jamming is the formation, under applied shear, of a load-bearing particle network capable of supporting stress like a solid. It is related to strong shear thickening but is not equivalent to a finite increase in flowing viscosity. Depending on concentration and boundary conditions, a suspension may thicken yet continue to flow, or develop a mechanically arrested state.

Rapid impacts introduce additional complications. In starch suspensions, a solid-like region can propagate away from an impacting object as a dynamic jamming front. The resulting force can depend on confinement, the moving front, and the amount of material accelerated. Such impact behavior cannot always be predicted from a steady-shear viscosity curve alone.

Experimental study and historical development

The distinction between particle dilation and thickening developed through studies of granular matter and rheology. Osborne Reynolds’s nineteenth-century work on the dilation of granular assemblies established an important precursor. Later suspension research emphasized hydrodynamic interactions and flow-induced microstructure. Experiments and simulations subsequently established the importance of frictional contacts and boundaries, especially for discontinuous thickening.

A rheometer measures the relationship between imposed deformation and resulting stress. Cone-and-plate, parallel-plate, and concentric-cylinder geometries are commonly used. Measurements may include shear stress, shear rate, normal force, and responses to changes in loading history.

Several effects complicate interpretation:

  • Wall slip: the material slides at the instrument surface rather than deforming uniformly.
  • Particle migration: flow changes the local particle concentration.
  • Sedimentation: a difference in density between particles and liquid changes sample uniformity.
  • Boundary changes: dilation, sample expulsion, or failure of the free surface alters confinement.
  • Inertial effects: secondary flows or turbulence increase measured resistance without constituting intrinsic shear thickening.

Reliable characterization therefore requires control of geometry, concentration, sample history, and temperature, together with checks that the intended flow is actually occurring.

Applications and limitations

Shear-thickening suspensions are investigated for adaptive damping, impact mitigation, protective textiles, and vibration control. Their attraction is a passive response: resistance increases under more demanding deformation without requiring electronic sensing or external actuation.

In treated textiles, suspension can alter friction between fibers and yarns and increase resistance to their rearrangement. Performance depends on the textile architecture, suspension formulation, loading conditions, and containment. An improvement in one impact or puncture test does not establish equivalent performance under other types of loading.

Shear thickening can also be undesirable in industrial mixing, pumping, and coating. A sudden rise in flow resistance may increase mechanical loads or obstruct processing.

Practical limitations include settling, aggregation, drying, leakage, wear, and changes in the liquid’s viscosity with temperature. Response also depends on the mode of deformation: behavior measured in simple shear does not automatically predict resistance during squeezing, stretching, or impact. These distinctions make the complete formulation and mechanical design as important as the presence of shear thickening itself.